[PATCHv5 19/20] arm: dts: make OMAP4460 bandgap node to belong to OCP

[Eduardo Valentin]

Small fix on representation. Bandgap node belongs to OCP.

Cc: "Benoît Cousson" <bcousson at baylibre.com>
Cc: Tony Lindgren <tony at atomide.com>
Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Stephen Warren <swarren at wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: linux-omap at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Suggested-by: Nishanth Menon <nm at ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin at ti.com>
---
 arch/arm/boot/dts/omap4460.dtsi | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index dc22719..def8183 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -39,14 +39,16 @@
 		#include "omap4-cpu-thermal.dtsi"
 	};
 
-	bandgap: bandgap {
-		reg = <0x4a002260 0x4
-		       0x4a00232C 0x4
-		       0x4a002378 0x18>;
-		compatible = "ti,omap4460-bandgap";
-		interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
-		gpios = <&gpio3 22 0>; /* tshut */
+	ocp {
+		bandgap: bandgap {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4
+			       0x4a002378 0x18>;
+			compatible = "ti,omap4460-bandgap";
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
+			gpios = <&gpio3 22 0>; /* tshut */
 
-		#thermal-sensor-cells = <0>;
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };
-- 
1.8.2.1.342.gfa7285d