[PATCH 3/5] pcmcia: sa1100: make use of device clock
Dmitry Eremin-Solenikov
dbaryshkov at gmail.com
Mon Nov 11 22:32:10 EST 2013
Use per-device clock (instead of calling cpufreq_get(0), which can
return 0 if no cpu frequency driver is selected) to program timings.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
---
drivers/pcmcia/sa1100_generic.c | 1 +
drivers/pcmcia/sa11xx_base.c | 14 ++++++++++++--
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index ff8a027..d2ab060 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -93,6 +93,7 @@ static int sa11x0_drv_pcmcia_remove(struct platform_device *dev)
for (i = 0; i < sinfo->nskt; i++)
soc_pcmcia_remove_one(&sinfo->skt[i]);
+ clk_put(sinfo->clk);
kfree(sinfo);
return 0;
}
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 6eecd7c..aef0e69 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -38,6 +38,7 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -138,14 +139,15 @@ sa1100_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
static int
sa1100_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
{
- return sa1100_pcmcia_set_mecr(skt, cpufreq_get(0));
+ unsigned long clk = clk_get_rate(skt->clk);
+ return sa1100_pcmcia_set_mecr(skt, clk / 1000);
}
static int
sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf)
{
struct soc_pcmcia_timing timing;
- unsigned int clock = cpufreq_get(0);
+ unsigned int clock = clk_get_rate(skt->clk);
unsigned long mecr = MECR;
char *p = buf;
@@ -221,6 +223,11 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
int i, ret = 0;
+ struct clk *clk;
+
+ clk = clk_get(dev, NULL);
+ if (IS_ERR(clk))
+ return -ENODEV;
sa11xx_drv_pcmcia_ops(ops);
@@ -229,12 +236,14 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
return -ENOMEM;
sinfo->nskt = nr;
+ sinfo->clk = clk;
/* Initialize processor specific parameters */
for (i = 0; i < nr; i++) {
skt = &sinfo->skt[i];
skt->nr = first + i;
+ skt->clk = clk;
soc_pcmcia_init_one(skt, ops, dev);
ret = sa11xx_drv_pcmcia_add_one(skt);
@@ -245,6 +254,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
if (ret) {
while (--i >= 0)
soc_pcmcia_remove_one(&sinfo->skt[i]);
+ clk_put(clk);
kfree(sinfo);
} else {
dev_set_drvdata(dev, sinfo);
--
1.8.4.2
More information about the linux-arm-kernel
mailing list