[PATCHv4][ 3/7] staging: imx-drm: Add RGB666 support for parallel display.

Troy Kisky troy.kisky at boundarydevices.com
Wed Nov 13 13:43:44 EST 2013


On 11/13/2013 2:23 AM, Denis Carikli wrote:
>   
> +	/* rgb666 */
> +	ipu_dc_map_clear(priv, IPU_DC_MAP_RGB666);
> +	ipu_dc_map_config(priv, IPU_DC_MAP_RGB666, 2, 17, 0xfc); /* red */
> +	ipu_dc_map_config(priv, IPU_DC_MAP_RGB666, 1, 11, 0xfc); /* green */
> +	ipu_dc_map_config(priv, IPU_DC_MAP_RGB666, 0, 5, 0xfc); /* blue */
> +
>   	return 0;
>   }
>   
>

Since,  rgb24 and bgr24 reverse the byte numbers
/* rgb24 */
         ipu_dc_map_clear(priv, IPU_DC_MAP_RGB24);
         ipu_dc_map_config(priv, IPU_DC_MAP_RGB24, 0, 7, 0xff); /* blue */
         ipu_dc_map_config(priv, IPU_DC_MAP_RGB24, 1, 15, 0xff); /* green */
         ipu_dc_map_config(priv, IPU_DC_MAP_RGB24, 2, 23, 0xff); /* red */

/* bgr24 */
         ipu_dc_map_clear(priv, IPU_DC_MAP_BGR24);
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR24, 2, 7, 0xff); /* red */
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR24, 1, 15, 0xff); /* green */
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR24, 0, 23, 0xff); /* blue */


Shouldn't rgb666 and bgr666 do the same?
Currently we have,

/* bgr666 */
         ipu_dc_map_clear(priv, IPU_DC_MAP_BGR666);
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 0, 5, 0xfc); /* blue */
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 1, 11, 0xfc); /* 
green */
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 2, 17, 0xfc); /* red */

Where I'd expect to see
/* bgr666 */
         ipu_dc_map_clear(priv, IPU_DC_MAP_BGR666);
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 0, 17, 0xfc); /* blue */
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 1, 11, 0xfc); /* 
green */
         ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 2, 5, 0xfc); /* red */


So, it looks like you are adding a duplicate of bgr666 because bgr666 is 
wrong.
Also, I'd prefer to keep the entries in 0,1,2 byte number order(blue, 
green, red,
assuming byte 0 is always blue) so that duplicates are easier to spot.

Not related to this patch, but the comments on gbr24 appear wrong as well.

/* gbr24 */
         ipu_dc_map_clear(priv, IPU_DC_MAP_GBR24);
         ipu_dc_map_config(priv, IPU_DC_MAP_GBR24, 2, 15, 0xff); /* green */
         ipu_dc_map_config(priv, IPU_DC_MAP_GBR24, 1, 7, 0xff); /* blue */
         ipu_dc_map_config(priv, IPU_DC_MAP_GBR24, 0, 23, 0xff); /* red */

Should be
/* brg24 */
         ipu_dc_map_clear(priv, IPU_DC_MAP_BRG24);
         ipu_dc_map_config(priv, IPU_DC_MAP_BRG24, 0, 23, 0xff); /* blue*/
         ipu_dc_map_config(priv, IPU_DC_MAP_BRG24, 1, 7, 0xff); /* green */
         ipu_dc_map_config(priv, IPU_DC_MAP_BRG24, 2, 15, 0xff); /* red */

Of course, my understanding may be totally wrong. If so, please show me 
the light!


Troy




More information about the linux-arm-kernel mailing list