[PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx

[Tony Lindgren]

* Balaji T K <balajitk at ti.com> [131121 05:51]:
> pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
> and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.
> 
> Fix the following error message:
> pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
> pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x
> 
> SDIO card is not detected after moving pin mux to omap4_pmx_core since
> sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.

Cool, does this fix the issue with the WLAN not coming up after a warm reset
on panda?

Regards,

Tony