[PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx

[Dan Murphy]

On 11/21/2013 10:58 AM, Tony Lindgren wrote:
> * Balaji T K <balajitk at ti.com> [131121 05:51]:
>> pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
>> and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.
>>
>> Fix the following error message:
>> pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
>> pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x

Why is the led pins moved then?

>> SDIO card is not detected after moving pin mux to omap4_pmx_core since
>> sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.
> Cool, does this fix the issue with the WLAN not coming up after a warm reset
> on panda?
>
> Regards,
>
> Tony
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


-- 
------------------
Dan Murphy