[PATCH] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.

Shawn Guo shawn.guo at linaro.org
Thu Nov 28 00:58:50 EST 2013


On Wed, Nov 27, 2013 at 04:27:44PM +0100, Denis Carikli wrote:
> The following devices/functionalities were added:
>  * Main and secondary UARTs.
>  * i2c and the pcf8563 device.
>  * Ethernet.
>  * NAND.
>  * The BP1 button.
>  * The LED.
>  * Watchdog.
>  * SD.
>  * USB host.
> 
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: Pawel Moll <pawel.moll at arm.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Stephen Warren <swarren at wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
> Cc: Grant Likely <grant.likely at linaro.org>
> Cc: devicetree at vger.kernel.org
> Cc: Sascha Hauer <kernel at pengutronix.de>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: Eric Bénard <eric at eukrea.com>
> Signed-off-by: Denis Carikli <denis at eukrea.com>
> ---
>  arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi       |   81 +++++++++++++++
>  .../boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts  |  106 ++++++++++++++++++++
>  2 files changed, 187 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
>  create mode 100644 arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts

Whenever you add a board DTS support, please also add the DTB target
into arch/arm/boot/dts/Makefile.

> 
> diff --git a/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
> new file mode 100644
> index 0000000..cb40cf3
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
> @@ -0,0 +1,81 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis at eukrea.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "imx53.dtsi"
> +
> +/ {
> +	model = "Eukrea CPUIMX53";
> +	compatible = "eukrea,cpuimx53", "fsl,imx53";
> +
> +	memory {
> +		reg = <0x70000000 0x20000000>; /* 512M */
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec>;
> +	phy-reset-gpios = <&gpio2 30 1>;

Please use the macros in include/dt-bindings/gpio/gpio.h to get a better
readability.

> +	phy-mode = "rmii";
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	pcf8563 at 51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	imx53-eukrea {
> +		pinctrl_hog: hoggrp {
> +			fsl,pins = <
> +				MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
> +			>;
> +		};
> +
> +		pinctrl_fec: fecgrp {
> +			fsl,pins = <MX53_FEC_PINGRP1>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <MX53_I2C1_PINGRP1>;
> +		};
> +
> +		pinctrl_nand: nandgrp {
> +			fsl,pins = <MX53_NAND_PINGRP1>;
> +
> +		};
> +	};
> +};
> +
> +&nfc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_nand>;
> +	nand-bus-width = <8>;
> +	nand-ecc-mode = "hw";
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	phy_type = "utmi";
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
> new file mode 100644
> index 0000000..95929aa
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
> @@ -0,0 +1,106 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis at eukrea.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "imx53-eukrea-cpuimx53.dtsi"
> +
> +/ {
> +	model = "Eukrea MBIMX53SD";
> +	compatible = "eukrea,mbimxsd53","eukrea,cpuimx53", "fsl,imx53";
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpiokeys>;
> +
> +		button-1 {
> +			label = "BP1";
> +			gpios = <&gpio4 14 1>;
> +			linux,code = <256>;
> +			gpio-key,wakeup;
> +			linux,input-type = <1>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpioled>;
> +
> +		led1 {
> +			label = "led1";
> +			gpios = <&gpio4 15 1>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	reg_3p3v: 3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3P3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};

Please follow the way that most IMX dts files do, i.e.

	regulators {
		reg_3p3v: regulator at 0 {
			reg = <0>;
		};
	};

Shawn

> +};
> +
> +
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
> +	cd-gpios = <&gpio5 17 1>;
> +	vqmmc-supply = <&reg_3p3v>;
> +	vmmc-supply = <&reg_3p3v>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	imx53-eukrea {
> +		pinctrl_esdhc1: esdhc1 {
> +			fsl,pins = <MX53_ESDHC1_PINGRP1>;
> +		};
> +
> +		pinctrl_esdhc1_cd: esdhc1_cd {
> +			fsl,pins = <MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000>;
> +		};
> +
> +		pinctrl_gpiokeys: gpiokeysgrp {
> +			fsl,pins = <MX53_PAD_KEY_COL4__GPIO4_14 0x80000000>;
> +		};
> +
> +		pinctrl_gpioled: gpioledgrp {
> +			fsl,pins = <MX53_PAD_KEY_ROW4__GPIO4_15 0x80000000>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <MX53_UART1_PINGRP2>;
> +		};
> +
> +		pinctrl_uart2: uart2grp {
> +			fsl,pins = <MX53_UART2_PINGRP2>;
> +		};
> +	};
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> -- 
> 1.7.9.5
> 




More information about the linux-arm-kernel mailing list