[PATCH 3/7] ARM: sa1100: refer to hardware IRQs step 1
Linus Walleij
linus.walleij at linaro.org
Tue Nov 12 08:48:13 EST 2013
This switches the references from Linux IRQ numbers to hardware
IRQ numbers in the code driving the low GPIOs and the "normal"
interrupt lines on the SA1100.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/mach-sa1100/irq.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index ac032c84763c..bf36b9abfaad 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -17,6 +17,7 @@
#include <linux/ioport.h>
#include <linux/syscore_ops.h>
#include <linux/irqdomain.h>
+#include <linux/bitops.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -76,25 +77,25 @@ static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
*/
static void sa1100_low_gpio_ack(struct irq_data *d)
{
- GEDR = (1 << d->irq);
+ GEDR = BIT(d->hwirq);
}
static void sa1100_low_gpio_mask(struct irq_data *d)
{
- ICMR &= ~(1 << d->irq);
+ ICMR &= ~BIT(d->hwirq);
}
static void sa1100_low_gpio_unmask(struct irq_data *d)
{
- ICMR |= 1 << d->irq;
+ ICMR |= BIT(d->hwirq);
}
static int sa1100_low_gpio_wake(struct irq_data *d, unsigned int on)
{
if (on)
- PWER |= 1 << d->irq;
+ PWER |= BIT(d->hwirq);
else
- PWER &= ~(1 << d->irq);
+ PWER &= ~BIT(d->hwirq);
return 0;
}
@@ -176,12 +177,12 @@ static int sa1100_high_gpio_wake(struct irq_data *d, unsigned int on)
*/
static void sa1100_mask_irq(struct irq_data *d)
{
- ICMR &= ~(1 << d->irq);
+ ICMR &= ~BIT(d->hwirq);
}
static void sa1100_unmask_irq(struct irq_data *d)
{
- ICMR |= (1 << d->irq);
+ ICMR |= BIT(d->hwirq);
}
/*
@@ -189,7 +190,7 @@ static void sa1100_unmask_irq(struct irq_data *d)
*/
static int sa1100_set_wake(struct irq_data *d, unsigned int on)
{
- if (d->irq == IRQ_RTCAlrm) {
+ if (d->hwirq == IRQ_RTCAlrm) {
if (on)
PWER |= PWER_RTC;
else
@@ -246,11 +247,11 @@ asmlinkage void __exception_irq_entry sa1100_handle_irq(struct pt_regs *regs)
{
struct sa1100_sc *sc = &sa1100_sc;
u32 status;
- int irq;
+ int hwirq;
while ((status = (ICIP & ICMR))) {
- irq = ffs(status) - 1;
- handle_IRQ(irq_find_mapping(sc->domain, irq), regs);
+ hwirq = ffs(status) - 1;
+ handle_IRQ(irq_find_mapping(sc->domain, hwirq), regs);
}
}
--
1.8.3.1
More information about the linux-arm-kernel
mailing list