[PATCHv8][ 4/5] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.

[Shawn Guo]

On Tue, Nov 12, 2013 at 12:24:18PM +0100, Denis Carikli wrote:
> The following devices/functionalities were added:
>  * Main and secondary UARTs.
>  * i2c and the pcf8563 device.
>  * Ethernet.
>  * NAND.
>  * The BP1 button.
>  * The LED.
>  * Watchdog
>  * SD.
> 
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: Pawel Moll <pawel.moll at arm.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Stephen Warren <swarren at wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
> Cc: Grant Likely <grant.likely at linaro.org>
> Cc: devicetree at vger.kernel.org
> Cc: Sascha Hauer <kernel at pengutronix.de>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: Eric Bénard <eric at eukrea.com>
> Signed-off-by: Denis Carikli <denis at eukrea.com>
> Acked-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
> ChangeLog v7->v8:
> - The commit message was improved.
> - The board specific iomuxc pins group configuration that were in imx35.dtsi were moved here.
> - The rest of the patch was updated accordingly.
> 
> ChangeLog v6->v7:
> - Added Grant Likely in the Cc list.
> - Shortened the license.
> - The tsc2007 pads were moved in another patch.
> 
> ChangeLog v5->v6:
> - Shawn Guo was added in the Cc.
> ---
>  arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi       |   58 +++++++++
>  .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts  |  124 ++++++++++++++++++++
>  2 files changed, 182 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
>  create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts

Please add the dtb target into arch/arm/boot/dts/Makefile.

> 
> diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> new file mode 100644
> index 0000000..3260678
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis at eukrea.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "imx35.dtsi"
> +
> +/ {
> +	model = "Eukrea CPUIMX35";
> +	compatible = "eukrea,cpuimx35", "fsl,imx35";
> +
> +	memory {
> +		reg = <0x80000000 0x8000000>; /* 128M */
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";

Nit: have a blank line here.

> +	pcf8563 at 51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};
> +};
> +
> +&iomuxc {
> +	imx35-eukrea {
> +		pinctrl_fec: fecgrp {
> +			fsl,pins = <MX35_FEC_PINGRP1>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <MX35_I2C1_PINGRP1>;
> +		};
> +	};
> +};
> +
> +&nfc {
> +	nand-bus-width = <8>;
> +	nand-ecc-mode = "hw";
> +	nand-on-flash-bbt;
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> new file mode 100644
> index 0000000..fe0f3fa
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> @@ -0,0 +1,124 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis at eukrea.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "imx35-eukrea-cpuimx35.dtsi"
> +
> +/ {
> +	model = "Eukrea CPUIMX35";
> +	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +
> +		bp1 {
> +			label = "BP1";
> +			gpios = <&gpio3 25 1>;
> +			linux,code = <256>;
> +			gpio-key,wakeup;
> +			linux,input-type = <1>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led1 {
> +			label = "led1";
> +			gpios = <&gpio3 29 1>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> +
> +&audmux {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_audmux>;
> +	status = "okay";
> +};
> +
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1>;
> +	cd-gpios = <&gpio3 24 0>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	tlv320aic23: codec at 1a {
> +		compatible = "ti,tlv320aic23";
> +		reg = <0x1a>;
> +	};
> +};
> +
> +&iomuxc {
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&pinctrl_hog>;

Use tab instead of spaces.

> +
> +	imx35-eukrea {
> +		pinctrl_hog: hoggrp {
> +			fsl,pins = <
> +				MX35_PAD_LD18__GPIO3_24  0x80000000
> +				MX35_PAD_LD19__GPIO3_25  0x80000000
> +				MX35_PAD_LD23__GPIO3_29  0x80000000
> +			>;
> +		};
> +
> +		pinctrl_audmux: audmuxgrp {
> +			fsl,pins = <MX35_AUDMUX_PINGRP1>;
> +		};
> +
> +		pinctrl_esdhc1: esdhc1grp {
> +			fsl,pins = <MX35_ESDHC1_PINGRP1>;
> +		};
> +
> +		pinctrl_fec: fecgrp {
> +			fsl,pins = <MX35_FEC_PINGRP1>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <MX35_I2C1_PINGRP1>;
> +		};
> +
> +		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {

'_' is used in label while '-' should be used in node name.

Shawn

> +			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <MX35_UART1_PINGRP1>;
> +		};
> +
> +		pinctrl_uart2: uart2grp {
> +			fsl,pins = <MX35_UART2_PINGRP1>;
> +		};
> +	};
> +};
> +
> +&ssi1 {
> +	fsl,mode = "i2s-slave";
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> -- 
> 1.7.9.5
>