[PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files

[Jason Cooper]

On Fri, Nov 08, 2013 at 11:14:07AM -0800, Olof Johansson wrote:
> On Fri, Nov 8, 2013 at 10:24 AM, Jason Cooper <jason at lakedaemon.net> wrote:
> > On Fri, Nov 08, 2013 at 12:06:26PM -0600, Kumar Gala wrote:
> >>
> >> On Nov 8, 2013, at 10:57 AM, Jason Cooper wrote:
> >>
> >> > On Fri, Nov 08, 2013 at 10:13:19AM -0600, Kumar Gala wrote:
> >> >> On Nov 5, 2013, at 8:28 AM, Sebastian Hesselbarth wrote:
> >> > ...
> >> >>> .../devicetree/bindings/arm/marvell,berlin.txt     |   24 +++
> >> >>> arch/arm/boot/dts/Makefile                         |    2 +
> >> >>> arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts         |   29 +++
> >> >>> arch/arm/boot/dts/berlin2.dtsi                     |  227 ++++++++++++++++++++
> >> >>> 4 files changed, 282 insertions(+)
> >> >>> create mode 100644 Documentation/devicetree/bindings/arm/marvell,berlin.txt
> >> >>> create mode 100644 arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
> >> >>> create mode 100644 arch/arm/boot/dts/berlin2.dtsi
> >> >>
> >> >> Haven't we been trying to go away from non-prefixed dts/dtsi?
> >> >
> >> > hmmm, this is the first I've heard of that.  Although, your proposal
> >> > (in another thread) makes more sense now.  :)
> >> >
> >> >> So should these be something like marvell-berlin2-...
> >> >
> >> > I don't recall this being brought up at the summit, nor in Grant's
> >> > report.  I do need to give it a more careful read this weekend, though.
> >> > Perhaps I missed something.
> >>
> >> This was based on review comments Olof gave when we pushed some .dts
> >> files for MSM/APQ Qualcomm Technologies soc/boards.
> >
> > As Andrew Lunn mentioned to me earlier, we should consider the fact that
> > the dts file names are being used by Debian's flash-kernel.  Oh no!
> > Another ABI! ;-)
> 
> Yes, the names are mostly stable. ST-Ericsson renamed their dts files
> and it caused some pain, some build environments have them hardcoded,
> etc.
> 
> Still, it is a good idea to start adding new ones using family or
> vendor prefixes, so they are easier to group. Please keep that in mind
> on new ones too, Jason -- I don't think I've discussed with you in the
> past. :-)

Nope, I definitely missed that if you did ;-)  Will do in the future.

Perhaps now is the time to consider separating the dts filename from the
dtb filename?  I'm warming up to my idea of globalscale,mirabox.dtb...

thx,

Jason.