[PATCH v8 1/4] ARM: dts: imx27 iomux device node

[Markus Pargmann]

This patch adds a iomux node for imx27 pinctrl driver. The gpio
registers are embedded in the iomux memory area. So this patch moves
them into the iomux node for a better hardware description.

Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
 arch/arm/boot/dts/imx27.dtsi | 125 +++++++++++++++++++++++--------------------
 1 file changed, 67 insertions(+), 58 deletions(-)

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b7a1c6d..f119296 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "imx27-pingrp.h"
 
 / {
 	aliases {
@@ -235,64 +236,72 @@
 				status = "disabled";
 			};
 
-			gpio1: gpio at 10015000 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015000 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio at 10015100 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015100 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio at 10015200 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015200 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio at 10015300 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015300 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio at 10015400 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015400 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio at 10015500 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015500 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+			iomuxc: iomuxc at 10015000 {
+				compatible = "fsl,imx27-iomuxc";
+				reg = <0x10015000 0x600>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				gpio1: gpio at 10015000 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015000 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio at 10015100 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015100 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio at 10015200 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015200 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio at 10015300 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015300 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio5: gpio at 10015400 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015400 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio6: gpio at 10015500 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015500 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			audmux: audmux at 10016000 {
-- 
1.8.4.2