[PATCH 0/5] Add Broadcom Kona PWM Support

[Tim Kryger]

This series introduces the driver for the Kona PWM controller found in
Broadcom mobile SoCs like bcm281xx and updates the device tree and the
defconfig to enable use of this hardware on the bcm28155 AP board.

It depends on:  https://lkml.org/lkml/2013/11/14/521

Tim Kryger (5):
  Documentation: dt: Add kona-pwm binding
  pwm: kona: Introduce Kona PWM controller support
  ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
  ARM: dts: Enable the PWM for bcm28155 AP board
  ARM: bcm_defconfig: Enable PWM and Backlight

 .../devicetree/bindings/pwm/bcm-kona-pwm.txt       |  24 +++
 arch/arm/boot/dts/bcm11351.dtsi                    |   8 +
 arch/arm/boot/dts/bcm28155-ap.dts                  |   4 +
 arch/arm/configs/bcm_defconfig                     |   2 +
 drivers/pwm/Kconfig                                |  10 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-bcm-kona.c                         | 226 +++++++++++++++++++++
 7 files changed, 275 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt
 create mode 100644 drivers/pwm/pwm-bcm-kona.c

-- 
1.8.0.1