[PATCH v2 00/11]: add remaining support for IGEP boards

[Tomi Valkeinen]

On 2013-11-25 17:30, Javier Martinez Canillas wrote:
> On Wed, Nov 20, 2013 at 2:06 AM, Javier Martinez Canillas
> <javier.martinez at collabora.co.uk> wrote:
>> In order to make mach-omap2 Device Tree only, the board file for
>> IGEP boards was removed even when support for wifi and display
>> was still not supported by its DTS.
>>
>> This is a second version of a patch-set that adds support for
>> these remaining peripherals and also adds support for USB,
>> HDMI and user LED for the am33xx SoC based IGEP Aquila board.
>>
>> The patch-set is composed of the following patches:
>>
>> Enric Balletbo i Serra (7):
>>       ARM: dts: omap3-igep: Fix bus-width for mmc1.
>>       ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.
>>       ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.
>>       ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
>>       ARM: dts: AM33XX BASE0033: add pinmux and user led support.
>>       ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support.
>>       ARM: dts: AM33XX IGEP0033: add USB support.
>>
>> Javier Martinez Canillas (4):
>>       ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
>>       ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
>>       ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
>>       ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
>>
>> Changes since v1:
>>
>>  Don't add a workaround in drivers/video/omap2/dss/dpi.c to use the
>>  VPLL2 regulator from twl4030 if VDDS_DSI regulator is not linked to
>>  the DPI device since the used regulator is a per board configuration.
>>
>>  Instead add a regulator-name = "vdds_dsi" property to the regulator
>>  in the IGEPv2 DTS file as suggested by Tony Lindgren.
>>
>> Tony,
>>
>> Most of these patches are just DTS changes so they have to be picked
>> by Benoit besides the following patch that has to go through your tree
>>
>> [PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
>>
>> Since we have removed the board file for IGEP boards I think these
>> can be considered as regression fixes for 3.13 although I don't mind
>> if you prefer to wait for 3.14.
>>
>> Thanks a lot and best regards,
>> Javier
>> --
> 
> Hi Benoit and Tony,
> 
> Now that 3.13-rc1 is out, do you think that it would be possible to
> include this series as a fix for the -rc cycle?
> 
> Otherwise we will have missing functionality for IGEP boards on 3.13
> due the board file removal. The changes are mostly DT and won't affect
> other boards.

The DSS related parts look fine to me.

 Tomi


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 901 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131126/2396ccc3/attachment.sig>