[PATCH 18/31] ASoC: tegra: allocate AHUB FIFO during probe() not startup()

[Thierry Reding]

On Fri, Nov 15, 2013 at 01:54:13PM -0700, Stephen Warren wrote:
> From: Stephen Warren <swarren at nvidia.com>
> 
> Teh Tegra30 I2S driver currently allocates DMA FIFOs from the AHUB only

s/Teh/The/

> when an audio stream starts playback. This is theoretically nice for
> resource sharing, but makes no practical difference for any configuration
> the drivers currently support. However, this deferral prevents conversion
> to the standard DMA DT bindings, since conversion requires knowledge of
> the specific DMA channel to be allocated, which in turn depends on which
> specific FIFO was allocated.
> 
> For this reason, move the FIFO allocate into probe() to allow later

s/allocate/allocation/?

[...]
> +	i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +	i2s->playback_dma_data.maxburst = 4;
> +	ret = tegra30_ahub_allocate_tx_fifo(&i2s->playback_fifo_cif,
> +					    &i2s->playback_dma_data.addr,
> +					    &i2s->playback_dma_data.slave_id);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Could not alloc TX FIFO: %d\n", ret);
> +		goto err_suspend;
> +	}
> +	ret = tegra30_ahub_set_rx_cif_source(i2s->playback_i2s_cif,
> +					     i2s->playback_fifo_cif);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Could not route TX FIFO: %d\n", ret);
> +		goto err_free_tx_fifo;
> +	}
> +
> +	i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +	i2s->capture_dma_data.maxburst = 4;
> +	ret = tegra30_ahub_allocate_rx_fifo(&i2s->capture_fifo_cif,
> +					    &i2s->capture_dma_data.addr,
> +					    &i2s->capture_dma_data.slave_id);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Could not alloc RX FIFO: %d\n", ret);
> +		goto err_unroute_tx_fifo;
> +	}
> +	ret = tegra30_ahub_set_rx_cif_source(i2s->capture_fifo_cif,
> +					     i2s->capture_i2s_cif);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Could not route TX FIFO: %d\n", ret);
> +		goto err_free_rx_fifo;
> +	}
> +

It could be useful to have these in a separate function so as not to
make the .probe() any larger. It's already pretty big as it is.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131129/8ab7732f/attachment.sig>