[PATCH v2 2/4] ARM: imx53: use clock defines in DTS files
Lucas Stach
l.stach at pengutronix.de
Thu Nov 14 05:10:14 EST 2013
For better readablitity and no need to look up numbers
in the documentation anymore.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
arch/arm/boot/dts/imx53-m53evk.dts | 2 +-
arch/arm/boot/dts/imx53-mba53.dts | 2 +-
arch/arm/boot/dts/imx53-qsb.dts | 2 +-
arch/arm/boot/dts/imx53.dtsi | 122 +++++++++++++++++++++++--------------
4 files changed, 80 insertions(+), 48 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 75834499e888..912163dd3248 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -146,7 +146,7 @@
reg = <0x0a>;
VDDA-supply = <®_3p2v>;
VDDIO-supply = <®_3p2v>;
- clocks = <&clks 150>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
};
};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 3897bd8a6bf0..0358366c5a17 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -163,7 +163,7 @@
codec: sgtl5000 at a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 150>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
VDDA-supply = <®_3p2v>;
VDDIO-supply = <®_3p2v>;
};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 6d05822db8d0..aae06bbd821b 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -219,7 +219,7 @@
reg = <0x0a>;
VDDA-supply = <®_3p2v>;
VDDIO-supply = <®_3p2v>;
- clocks = <&clks 150>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
};
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index cffdda2d966e..b330ef758bcb 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -13,6 +13,7 @@
#include "skeleton.dtsi"
#include "imx53-pinfunc.h"
#include "imx53-pingrp.h"
+#include <dt-bindings/clock/imx5-clock.h>
/ {
aliases {
@@ -90,7 +91,9 @@
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
- clocks = <&clks 59>, <&clks 110>, <&clks 61>;
+ clocks = <&clks IMX5_CLK_IPU_GATE>,
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
};
@@ -113,7 +116,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
- clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -123,7 +128,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
- clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -133,7 +140,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
- clocks = <&clks 32>, <&clks 33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -144,7 +152,8 @@
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
- clocks = <&clks 51>, <&clks 52>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -153,7 +162,7 @@
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
- clocks = <&clks 49>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
@@ -166,7 +175,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
- clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -176,7 +187,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
- clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -185,14 +198,14 @@
usbphy0: usbphy at 0 {
compatible = "usb-nop-xceiv";
- clocks = <&clks 124>;
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
clock-names = "main_clk";
status = "okay";
};
usbphy1: usbphy at 1 {
compatible = "usb-nop-xceiv";
- clocks = <&clks 125>;
+ clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
clock-names = "main_clk";
status = "okay";
};
@@ -201,7 +214,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
@@ -211,7 +224,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
@@ -221,7 +234,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
@@ -230,7 +243,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
@@ -239,7 +252,7 @@
#index-cells = <1>;
compatible = "fsl,imx53-usbmisc";
reg = <0x53f80800 0x200>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
};
gpio1: gpio at 53f84000 {
@@ -286,7 +299,7 @@
compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
reg = <0x53f94000 0x4000>;
interrupts = <60>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
@@ -294,14 +307,14 @@
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
};
wdog2: wdog at 53f9c000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
@@ -309,7 +322,8 @@
compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
- clocks = <&clks 36>, <&clks 41>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
@@ -329,9 +343,12 @@
compatible = "fsl,imx53-ldb";
reg = <0x53fa8008 0x4>;
gpr = <&gpr>;
- clocks = <&clks 122>, <&clks 120>,
- <&clks 115>, <&clks 116>,
- <&clks 123>, <&clks 85>;
+ clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+ <&clks IMX5_CLK_LDB_DI1_SEL>,
+ <&clks IMX5_CLK_IPU_DI0_SEL>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>,
+ <&clks IMX5_CLK_LDB_DI0_GATE>,
+ <&clks IMX5_CLK_LDB_DI1_GATE>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
@@ -354,7 +371,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
- clocks = <&clks 37>, <&clks 38>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -363,7 +381,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
- clocks = <&clks 39>, <&clks 40>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -372,7 +391,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
- clocks = <&clks 28>, <&clks 29>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -381,7 +401,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
- clocks = <&clks 30>, <&clks 31>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -390,7 +411,8 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
- clocks = <&clks 158>, <&clks 157>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+ <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -399,7 +421,8 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
- clocks = <&clks 87>, <&clks 86>;
+ clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+ <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -453,7 +476,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
- clocks = <&clks 88>;
+ clocks = <&clks IMX5_CLK_I2C3_GATE>;
status = "disabled";
};
@@ -461,7 +484,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
- clocks = <&clks 65>, <&clks 66>;
+ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+ <&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -478,14 +502,15 @@
compatible = "fsl,imx53-iim", "fsl,imx27-iim";
reg = <0x63f98000 0x4000>;
interrupts = <69>;
- clocks = <&clks 107>;
+ clocks = <&clks IMX5_CLK_IIM_GATE>;
};
uart5: serial at 63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
- clocks = <&clks 67>, <&clks 68>;
+ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+ <&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -493,7 +518,7 @@
owire: owire at 63fa4000 {
compatible = "fsl,imx53-owire", "fsl,imx21-owire";
reg = <0x63fa4000 0x4000>;
- clocks = <&clks 159>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
status = "disabled";
};
@@ -503,7 +528,8 @@
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
- clocks = <&clks 53>, <&clks 54>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -512,7 +538,8 @@
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
- clocks = <&clks 56>, <&clks 56>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
@@ -524,7 +551,8 @@
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 55>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -535,7 +563,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
- clocks = <&clks 35>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
status = "disabled";
};
@@ -545,7 +573,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
- clocks = <&clks 34>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
status = "disabled";
};
@@ -553,7 +581,7 @@
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
- clocks = <&clks 48>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
@@ -572,7 +600,7 @@
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
- clocks = <&clks 60>;
+ clocks = <&clks IMX5_CLK_NFC_GATE>;
status = "disabled";
};
@@ -580,7 +608,7 @@
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
- clocks = <&clks 50>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";
@@ -593,7 +621,9 @@
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
- clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
@@ -602,7 +632,8 @@
compatible = "fsl,imx53-tve";
reg = <0x63ff0000 0x1000>;
interrupts = <92>;
- clocks = <&clks 69>, <&clks 116>;
+ clocks = <&clks IMX5_CLK_TVE_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>;
clock-names = "tve", "di_sel";
crtcs = <&ipu 1>;
status = "disabled";
@@ -612,7 +643,8 @@
compatible = "fsl,imx53-vpu";
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
- clocks = <&clks 63>, <&clks 63>;
+ clocks = <&clks IMX5_CLK_VPU_GATE>,
+ <&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
iram = <&ocram>;
status = "disabled";
@@ -622,7 +654,7 @@
ocram: sram at f8000000 {
compatible = "mmio-sram";
reg = <0xf8000000 0x20000>;
- clocks = <&clks 186>;
+ clocks = <&clks IMX5_CLK_OCRAM>;
};
};
};
--
1.8.4.2
More information about the linux-arm-kernel
mailing list