[PATCHv9 10/43] clk: ti: add support for TI fixed factor clock

[Tero Kristo]

On 10/31/2013 08:12 PM, Nishanth Menon wrote:
> On 10/25/2013 10:57 AM, Tero Kristo wrote:
>> This behaves exactly in similar manner to basic fixed-factor-clock, but
>> adds a few properties on top for handling clock hardware autoidling.
>>
>> Signed-off-by: Tero Kristo <t-kristo at ti.com>
>> ---
>>   .../bindings/clock/ti/fixed-factor-clock.txt       |   29 +++++++++
>>   drivers/clk/ti/Makefile                            |    2 +-
>>   drivers/clk/ti/fixed-factor.c                      |   65 ++++++++++++++++++++
>>   3 files changed, 95 insertions(+), 1 deletion(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
>>   create mode 100644 drivers/clk/ti/fixed-factor.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
>> new file mode 100644
>> index 0000000..60b9e34
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
>> @@ -0,0 +1,29 @@
>> +Binding for TI fixed factor rate clock sources.
>> +
>> +Binding status: Unstable - ABI compatibility may be broken in the future
>> +
>> +This binding uses the common clock binding[1].
>> +
>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +
>> +Required properties:
>> +- compatible : shall be "ti,fixed-factor-clock".
>> +- #clock-cells : from common clock binding; shall be set to 0.
>> +- ti,clock-div: fixed divider.
>> +- ti,clock-mult: fixed multiplier.
>> +- clocks: parent clock.
>> +
>> +Optional properties:
>> +- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock
>> +- reg: offset for the autoidle register of this clock
>> +- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0
>
> The above three belong to autoidle stuff I think.. maybe pointing to
> it's binding will help?
>
>> +- ti,set-rate-parent: clk_set_rate is propagated to parent
>> +
>> +Example:
>> +	clock {
>> +		compatible = "ti,fixed-factor-clock";
>> +		clocks = <&parentclk>;
>> +		#clock-cells = <0>;
>> +		ti,clock-div = <2>;
>> +		ti,clock-mult = <1>;
>> +	};
>> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
>> index 640ebf9..f57fc4b 100644
>> --- a/drivers/clk/ti/Makefile
>> +++ b/drivers/clk/ti/Makefile
>> @@ -1,4 +1,4 @@
>>   ifneq ($(CONFIG_OF),)
>>   obj-y					+= clk.o dpll.o autoidle.o divider.o \
>> -					   composite.o
>> +					   fixed-factor.o composite.o
>>   endif
>> diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
>> new file mode 100644
>> index 0000000..e0549c6
>> --- /dev/null
>> +++ b/drivers/clk/ti/fixed-factor.c
>> @@ -0,0 +1,65 @@
>> +/*
>> + * TI Fixed Factor Clock
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + *
>> + * Tero Kristo <t-kristo at ti.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/slab.h>
>> +#include <linux/err.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/clk/ti.h>
>> +
>> +/**
>> + * of_ti_fixed_factor_clk_setup() - Setup function for TI fixed factor clock
>> + */
>> +static int __init of_ti_fixed_factor_clk_setup(struct device_node *node,
>> +					       struct regmap *regmap)
>> +{
>> +	struct clk *clk;
>> +	const char *clk_name = node->name;
>> +	const char *parent_name;
>> +	u32 div, mult;
>> +	u32 flags = 0;
>> +
>> +	if (of_property_read_u32(node, "ti,clock-div", &div)) {
>> +		pr_err("%s Fixed factor clock <%s> must have a clock-div property\n",
>> +		       __func__, node->name);
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (of_property_read_u32(node, "ti,clock-mult", &mult)) {
>> +		pr_err("%s Fixed factor clock <%s> must have a clokc-mult property\n",
>> +		       __func__, node->name);
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (of_property_read_bool(node, "ti,set-rate-parent"))
>> +		flags |= CLK_SET_RATE_PARENT;
>> +
>> +	parent_name = of_clk_get_parent_name(node, 0);
>> +
>> +	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags,
>> +					mult, div);
>> +
>> +	if (!IS_ERR(clk)) {
>> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
>> +		return of_ti_autoidle_setup(node, regmap);
>
> if this fails, remove provider and unregister?

Unregister is not supported currently. I don't think I want to do 
partial cleanup here, failing autoidle setup is not critical anyway. The 
system will still boot-up properly, only PM is potentially broken. Can 
add an error print though.

-Tero

>
>> +	}
>> +
>> +	return PTR_ERR(clk);
>> +}
>> +CLK_OF_DECLARE(ti_fixed_factor_clk, "ti,fixed-factor-clock",
>> +	       of_ti_fixed_factor_clk_setup);
>>
>
>