[PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.

[Bill Pringlemeir]

[sorry, I should have copied alsa-devel at alsa-project.org previously].

On 19 Nov 2013, Li.Xiubo at freescale.com wrote:

>>> This patch add and enable SAI device.
>>>
>>> arch/arm/boot/dts/vf610-twr.dts | 6 ++++++
>>> 1 file changed, 6 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/vf610-twr.dts
>>> b/arch/arm/boot/dts/vf610-twr.dts index 1a58678..e4106dd 100644
>>> --- a/arch/arm/boot/dts/vf610-twr.dts
>>> +++ b/arch/arm/boot/dts/vf610-twr.dts
>>>>> -57,6 +57,12 @@
>>> 	status = "okay";
>>> };
>>
>> Should we put a comment here that a TWR-AUDIO-SGTL board is needed?  Or
>> is this better in a menuconfig?  I guess TWR-AUDIO-SGTL is needed as this
>> codec is not on the VF610-TWR main board?
>>
>
> Yes, the SGTL5000 codec is not on the VF610-TWR main board, and needs an extra
> 	TWR-AUDIO-SGTL board.
>
> IMO, puting this comment in the menuconfig is much better.

I agree.  I guess the patch set 6 makes more sense.  Also, you might
consider adding a printk in the 'fsl_sgtl5000_probe()'.  I guess that
devm_snd_soc_register_card() will fail if the board is not present?  As
the board is not 'standard' people may come asking why the audio fails
on the 'VF610-TWR'.

+	ret = devm_snd_soc_register_card(&pdev->dev, &fsl_sgt1500_card);
+	if (ret) {
+		dev_err(&pdev->dev, "register soc sound card failed :%d\n"
+                               "TWR-AUDIO-SGTL board required.\n",
+				ret);
+		return ret;
+	}

Especially, you can make one kernel that handles both cases w/wo
TWR-AUDIO-SGTL board attached.

Thanks for your work.
Bill Pringlemeir.