[PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks

[Joel Fernandes]

Hi Vaibhav,

On 10/31/2013 05:25 PM, Vaibhav Bedia wrote:
> Hi Daniel,
> 
> On Wed, Oct 30, 2013 at 4:21 PM, Daniel Mack <zonque at gmail.com> wrote:
> [...]
>> +
>> +static SIMPLE_DEV_PM_OPS(edma_pm_ops, edma_pm_suspend, edma_pm_resume);
>> +
>>  static struct platform_driver edma_driver = {
>>         .driver = {
>>                 .name   = "edma",
>> +               .pm     = &edma_pm_ops,
>>                 .of_match_table = edma_of_ids,
>>         },
> 
> A while back we discovered a nasty race condition here that had us move the EDMA
> PM callbacks to the noirq phase. IIRC the MMC driver was resuming
> before the EDMA
> driver had a chance to run and that was leading to a deadlock. I am
> not sure how to force
> this scenario but i do remember spending time debugging this on a
> random codebase.
> Maybe some else has some better ideas on how to force this race condition...

I think you're talking about the patch at [1] which is not upstream. A quick
question with my limited knowledge of suspend/resume- How can there be pending
I/O operations between suspend/resume cycles? The sync is done before suspend,
so I don't understand how one is receiving a response from the card after resume
before EDMA can resume? I'd imagine that until all devices are resumed, there
will be no I/O operation issued. Let me know your thoughts.

thanks,

-Joel

[1]
https://www.gitorious.org/x0148406-public/linux-kernel/commit/b81bf04091986fa3893f31955564594567be3b61