[PATCH v3 06/10] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/ti-phy.txt

[Kishon Vijay Abraham I]

Since now we have a separate folder for phy, move the PHY dt binding
documentation of TI to that folder.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 .../devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt}    |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
 rename Documentation/devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt} (88%)

diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
similarity index 88%
rename from Documentation/devicetree/bindings/usb/usb-phy.txt
rename to Documentation/devicetree/bindings/phy/ti-phy.txt
index c0245c8..207e14c 100644
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -1,4 +1,4 @@
-USB PHY
+TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs
 
 OMAP USB2 PHY
 
@@ -21,10 +21,10 @@ usb2phy at 4a0ad080 {
 	#phy-cells = <0>;
 };
 
-OMAP USB3 PHY
+TI PIPE3 PHY
 
 Required properties:
- - compatible: Should be "ti,omap-usb3"
+ - compatible: Should be "ti,phy-usb3". "ti,omap-usb3" is deprecated.
  - reg : Address and length of the register set for the device.
  - reg-names: The names of the register addresses corresponding to the registers
    filled in "reg".
@@ -38,7 +38,7 @@ Optional properties:
 This is usually a subnode of ocp2scp to which it is connected.
 
 usb3phy at 4a084400 {
-	compatible = "ti,omap-usb3";
+	compatible = "ti,phy-usb3";
 	reg = <0x4a084400 0x80>,
 	      <0x4a084800 0x64>,
 	      <0x4a084c00 0x40>;
-- 
1.7.10.4