[PATCH] clocksource: armada-370-xp: Register sched_clock after the counter reset
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Tue Nov 26 16:20:14 EST 2013
This commit registers the sched_clock _after_ the counter reset
(instead of before). This removes the timestamp 'jump' in kernel
log messages.
Before this change:
[ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns
[ 0.000000] Initializing Coherency fabric
[ 0.000000] Aurora cache controller enabled
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB
[ 163.507447] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528)
[ 163.521419] pid_max: default: 32768 minimum: 301
[ 163.526185] Mount-cache hash table entries: 512
[ 163.531095] CPU: Testing write buffer coherency: ok
After this change:
[ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns
[ 0.000000] Initializing Coherency fabric
[ 0.000000] Aurora cache controller enabled
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB
[ 0.016849] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528)
[ 0.030820] pid_max: default: 32768 minimum: 301
[ 0.035588] Mount-cache hash table entries: 512
[ 0.040500] CPU: Testing write buffer coherency: ok
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
Nobody has ever complained about the 'jump' in the timestamp, so maybe
this is a stupid and useless change.
drivers/clocksource/time-armada-370-xp.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index d8e47e5..4e7f680 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -256,11 +256,6 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
/*
- * Set scale and timer for sched_clock.
- */
- sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
-
- /*
* Setup free-running clocksource timer (interrupts
* disabled).
*/
@@ -270,6 +265,11 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
timer_ctrl_clrset(0, TIMER0_EN | TIMER0_RELOAD_EN |
TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ /*
+ * Set scale and timer for sched_clock.
+ */
+ sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
+
clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
"armada_370_xp_clocksource",
timer_clk, 300, 32, clocksource_mmio_readl_down);
--
1.8.1.5
More information about the linux-arm-kernel
mailing list