[PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings
Felipe Balbi
balbi at ti.com
Mon Nov 25 15:42:32 EST 2013
Hi,
On Mon, Nov 25, 2013 at 03:16:20PM -0500, WingMan Kwok wrote:
> Added device tree support for TI's Keystone USB driver and updated the
> Documentation with device tree binding information.
>
> On Keystone II platforms, we use no-op phy driver.
>
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Signed-off-by: WingMan Kwok <w-kwok2 at ti.com>
> ---
> .../devicetree/bindings/usb/keystone-usb.txt | 43 ++++++++++++++++++++
> arch/arm/boot/dts/keystone.dtsi | 27 ++++++++++++
> 2 files changed, 70 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/keystone-usb.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
> new file mode 100644
> index 0000000..a67de8f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
> @@ -0,0 +1,43 @@
> +TI Keystone Soc USB Controller
> +
> +DWC3 GLUE
> +
> +Required properties:
> + - compatible: should be "ti,keystone-dwc3".
> + - #address-cells, #size-cells : should be '1' if the device has sub-nodes
> + with 'reg' property.
> + - reg : Address and length of the register set for the device. First pair
> + is the USB subsystem specific register set. Second pair is the
> + USB subsystem PHY control register set.
> + - interrupts : The irq number of this device that is used to interrupt the
> + MPU.
> + - ranges: allows valid 1:1 translation between child's address space and
> + parent's address space.
> + - clocks: Clock IDs array as required by the controller.
> + - clock-names: names of clocks correseponding to IDs in the clock property.
> +
> +Sub-nodes:
> +The dwc3 core should be added as subnode to Keystone DWC3 glue.
> +- dwc3 :
> + The binding details of dwc3 can be found in:
> + Documentation/devicetree/bindings/usb/dwc3.txt
> +
> +Example:
> + usb: usb at 2680000 {
> + compatible = "ti,keystone-dwc3";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x2680000 0x10000
> + 0x2620738 32>;
> + clocks = <&clkusb>;
> + clock-names = "usb";
> + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
> + ranges;
> +
> + dwc3 at 2690000 {
> + compatible = "synopsys,dwc3";
> + reg = <0x2690000 0x70000>;
> + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
> + usb-phy = <&usb2_phy>, <&usb3_phy>;
> + };
> + };
> diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
> index f6d6d9e..1e1049c 100644
> --- a/arch/arm/boot/dts/keystone.dtsi
> +++ b/arch/arm/boot/dts/keystone.dtsi
> @@ -181,5 +181,32 @@
> interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
> clocks = <&clkspi>;
> };
> +
> + usb2_phy: usb2_phy {
> + compatible = "usb-nop-xceiv";
> + };
> +
> + usb3_phy: usb3_phy {
> + compatible = "usb-nop-xceiv";
> + };
you actually have some phy registers which need to be fiddled with. I'd
suggest implementing this the same way phy-am335x.c is implemented. It
still reuses most of phy-generic.c, but it has some hooks to implement
->init() and ->shutdown(), which seem to be the only methods you need.
BTW, some preliminary TRM coming my way would be cool, so I can better
understand how this HW behaves. A board would also go a long way, so I
could test this myself (we are part of the same company anyway).
cheers
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131125/34301f12/attachment.sig>
More information about the linux-arm-kernel
mailing list