[PATCH] clk: keystone: gate: don't use reserved bits

[ivan.khoronzhuk]

On 11/21/2013 05:35 PM, Shilimkar, Santosh wrote:
> Sorry for top posting. The user-guide is not upto date....
>
> State
> 4:0
> R
> Actual state
> Current Power Domain State.
> Only PSM states Off and On are “key states” that users should consider in normal run time situation. States with bit 4 = 1 are transitional states helpful for debug if PSM is stuck in those states.
>
> Regards,
> Santosh
>
> ________________________________________
> From: Khoronzhuk, Ivan
> Sent: Thursday, November 21, 2013 10:30 AM
> To: Shilimkar, Santosh
> Cc: Mike Turquette; linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Strashko, Grygorii; Khoronzhuk, Ivan
> Subject: [PATCH] clk: keystone: gate: don't use reserved bits
>
> According to TRM http://www.ti.com/lit/ug/sprugv4b/sprugv4b.pdf
> the Power Domain Status Register (PDSTAT) has 0-1 bits for power
> domain status, but PDSTAT_STATE_MASK is defined with 0x1F. In that
> case we operate with reserved bits. So correct PDSTAT_STATE_MASK
> to be 0x03.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
> ---
>   drivers/clk/keystone/gate.c |    2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/keystone/gate.c b/drivers/clk/keystone/gate.c
> index 1f333bc..995ae80 100644
> --- a/drivers/clk/keystone/gate.c
> +++ b/drivers/clk/keystone/gate.c
> @@ -35,7 +35,7 @@
>
>   #define MDSTAT_STATE_MASK      0x3f
>   #define MDSTAT_MCKOUT          BIT(12)
> -#define PDSTAT_STATE_MASK      0x1f
> +#define PDSTAT_STATE_MASK      0x03
>   #define MDCTL_FORCE            BIT(31)
>   #define MDCTL_LRESET           BIT(8)
>   #define PDCTL_NEXT             BIT(0)
> --
> 1.7.9.5
>

Ok

-- 
Regards,
Ivan Khoronzhuk