[PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set

Santosh Shilimkar santosh.shilimkar at ti.com
Wed Nov 20 15:32:09 EST 2013


+ Kevin and Rafiel,

On Wednesday 20 November 2013 03:11 PM, Grygorii Strashko wrote:
> On 11/20/2013 09:53 PM, Stephen Boyd wrote:
>> On 11/20/13 11:06, Grygorii Strashko wrote:
>>> On 11/20/2013 08:42 PM, Stephen Boyd wrote:
>>>> On 11/20/13 05:31, Grygorii Strashko wrote:
>>>>> @@ -230,7 +230,7 @@ int pm_clk_suspend(struct device *dev)
>>>>>    	list_for_each_entry_reverse(ce, &psd->clock_list, node) {
>>>>>    		if (ce->status < PCE_STATUS_ERROR) {
>>>>>    			if (ce->status == PCE_STATUS_ENABLED)
>>>>> -				clk_disable(ce->clk);
>>>>> +				clk_disable_unprepare(ce->clk);
>>>>>    			ce->status = PCE_STATUS_ACQUIRED;
>>>>>    		}
>>>>>    	}
>>>>> @@ -259,7 +259,7 @@ int pm_clk_resume(struct device *dev)
>>>>>    
>>>>>    	list_for_each_entry(ce, &psd->clock_list, node) {
>>>>>    		if (ce->status < PCE_STATUS_ERROR) {
>>>>> -			clk_enable(ce->clk);
>>>>> +			clk_prepare_enable(ce->clk);
>>>>>    			ce->status = PCE_STATUS_ENABLED;
>>>>>    		}
>>>>>    	}
>>>> This is inside a spin_lock_irqsave(). You should be getting scheduling
>>>> while atomic warnings with this change. Are you testing with
>>>> DEBUG_ATOMIC_SLEEP=y?
>>> Ops, thanks. No, It's not tested with DEBUG_ATOMIC_SLEEP and
>>> I agree with you.
>>>
I suspected this and thats what I was trying to mention off-list
about sleeping inside locks.

>>> So, I see two option here:
>>> 1) split above loops on two
>>> 2) add calls of clk_prepare()/clk_unprepare() in pm_clk_notify()
>>>
>>> In my opinion option [2] is better.
>>>
>>
>> Doesn't that mean the clock will always be prepared as long as the
>> device is present? That doesn't sound good. I would like the clocks to
>> be disabled and unprepared as long as the device is suspended.
> 
> Yep (
> 
>>
>> What is the lock protecting? The linked list or something more? Can we
>> remove the locks?
> 
> Looks like it's protecting linked list pm_clock_entry'es.
> 
>>
>> It looks like even if you just remove the locks here, the PM core is
>> free to call this function with irqs disabled if pm_runtime_irq_safe()
>> has been called on the device. Perhaps runtime PM can only do the
>> clk_enable()/clk_disable() part and the clk_unprepare()/clk_prepare()
>> calls should happen in the system suspend callbacks?
> 
> Even don't know what to say :( On Keystone clk_unprepare()/clk_prepare() are NOPs.
> But clk_prepare() has to be called at least once before clk_enable() :((
> So, solution with suspend/resume will not fix current problem :( unfortunately.
> 
> FYI, Now pm_clk_suspend/pm_clk_resume are called from arch/arm/mach-keystone/pm_domain.c
> (also similar solution is used by Davinci, but issue has not been detected because
> PM runtime hasn't been used by Davinci IP drivers before)
> 
One way to deal with this is to have clk_unprepare()/clk_prepare()
called from dev_pm_domain ops before calling pm_clk_[suspend/resume]() if we
can't have that as part of runtime code.

Kevin/Rafael might have better ideas here.

Regards,
Santosh




More information about the linux-arm-kernel mailing list