[PATCH 13/16] ARM: shmobile: r8a7779: cleanup registration of sh_eth
Simon Horman
horms+renesas at verge.net.au
Thu Nov 28 03:54:43 EST 2013
From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
sh_eth driver which needs platform data at the time of
registration is not used.
Now, ARM/shmobile aims to support DT,
and the C code base board support will be removed
if DT support is completed.
Current driver registration method which needs platform data
and which is not shared complicates codes.
This means legacy C code cleanup after DT supporting
will be more complicated
This patch removes r8a7779_add_ether_device()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/mach-shmobile/include/mach/r8a7779.h | 2 --
arch/arm/mach-shmobile/setup-r8a7779.c | 20 --------------------
2 files changed, 22 deletions(-)
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 1cab247..5014145 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -3,7 +3,6 @@
#include <linux/sh_clk.h>
#include <linux/pm_domain.h>
-#include <linux/sh_eth.h>
/* HPB-DMA slave IDs */
enum {
@@ -39,7 +38,6 @@ extern void r8a7779_earlytimer_init(void);
extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
extern void r8a7779_add_standard_devices_dt(void);
-extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
extern void r8a7779_init_late(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 51a43c5..8f94531 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -598,18 +598,6 @@ static struct platform_device ohci1_device = {
.resource = ohci1_resources,
};
-/* Ether */
-static struct resource ether_resources[] __initdata = {
- {
- .start = 0xfde00000,
- .end = 0xfde003ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = gic_iid(0xb4),
- .flags = IORESOURCE_IRQ,
- },
-};
-
/* HPB-DMA */
/* Asynchronous mode register bits */
@@ -798,14 +786,6 @@ void __init r8a7779_add_standard_devices(void)
r8a7779_register_hpb_dmae();
}
-void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
-{
- platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
- ether_resources,
- ARRAY_SIZE(ether_resources),
- pdata, sizeof(*pdata));
-}
-
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak r8a7779_register_twd(void) { }
--
1.8.4
More information about the linux-arm-kernel
mailing list