[PATCH v5 3/7] gpio: davinci: use irqdomain
Prabhakar Lad
prabhakar.csengg at gmail.com
Fri Nov 8 05:11:46 EST 2013
From: "Lad, Prabhakar" <prabhakar.csengg at gmail.com>
This patch converts the davinci gpio driver to use irqdomain
support.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg at gmail.com>
---
drivers/gpio/gpio-davinci.c | 74 +++++++++++++++-------------
include/linux/platform_data/gpio-davinci.h | 2 +-
2 files changed, 41 insertions(+), 35 deletions(-)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index ca3d7fd..b149239 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -16,6 +16,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-davinci.h>
@@ -282,8 +283,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
desc->irq_data.chip->irq_ack(&desc->irq_data);
while (1) {
u32 status;
- int n;
- int res;
+ int bit;
/* ack any irqs */
status = readl(&g->intstat) & mask;
@@ -292,17 +292,11 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
writel(status, &g->intstat);
/* now demux them to the right lowlevel handler */
- n = d->irq_base;
- if (irq & 1) {
- n += 16;
- status >>= 16;
- }
-
while (status) {
- res = ffs(status);
- n += res;
- generic_handle_irq(n - 1);
- status >>= res;
+ bit = __ffs(status);
+ status &= ~(1 << bit);
+ generic_handle_irq(irq_find_mapping(d->irq_domain,
+ bit));
}
}
desc->irq_data.chip->irq_unmask(&desc->irq_data);
@@ -313,10 +307,7 @@ static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
{
struct davinci_gpio_controller *d = chip2controller(chip);
- if (d->irq_base >= 0)
- return d->irq_base + offset;
- else
- return -ENODEV;
+ return irq_create_mapping(d->irq_domain, offset);
}
static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
@@ -354,6 +345,28 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
return 0;
}
+static int davinci_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ struct davinci_gpio_controller *chip = d->host_data;
+ unsigned gpio = chip->chip.base + hw;
+ struct davinci_gpio_regs __iomem *g = gpio2regs(gpio);
+
+ irq_set_chip_and_handler_name(irq, &gpio_irqchip, handle_simple_irq,
+ "davinci_gpio");
+ irq_set_irq_type(irq, IRQ_TYPE_NONE);
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ set_irq_flags(irq, IRQF_VALID);
+
+ return 0;
+}
+
+static const struct irq_domain_ops davinci_gpio_irq_ops = {
+ .map = davinci_gpio_irq_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
/*
* NOTE: for suspend/resume, probably best to make a platform_device with
* suspend_late/resume_resume calls hooking into results of the set_wake()
@@ -402,9 +415,16 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
*/
for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
chips[bank].chip.to_irq = gpio_to_irq_banked;
- chips[bank].irq_base = pdata->gpio_unbanked
- ? -EINVAL
- : (pdata->intc_irq_num + gpio);
+ if (!pdata->gpio_unbanked) {
+ chips[bank].irq_domain =
+ irq_domain_add_linear(NULL,
+ chips[bank].chip.ngpio,
+ &davinci_gpio_irq_ops,
+ &chips[bank]);
+
+ if (!chips[bank].irq_domain)
+ return -ENOMEM;
+ }
}
/*
@@ -447,11 +467,7 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
* Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
* then chain through our own handler.
*/
- for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
- gpio < ngpio;
- bank++, bank_irq++) {
- unsigned i;
-
+ for (gpio = 0, bank = 0; gpio < ngpio; bank++, bank_irq++, gpio += 16) {
/* disabled by default, enabled only as needed */
g = gpio2regs(gpio);
writel(~0, &g->clr_falling);
@@ -467,14 +483,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
*/
irq_set_handler_data(bank_irq, &chips[gpio / 32]);
- for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
- irq_set_chip(irq, &gpio_irqchip);
- irq_set_chip_data(irq, (__force void *)g);
- irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
- irq_set_handler(irq, handle_simple_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
binten |= BIT(bank);
}
@@ -485,8 +493,6 @@ done:
*/
writel(binten, gpio_base + BINTEN);
- printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
-
return 0;
}
diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h
index 6efd202..0c3551b 100644
--- a/include/linux/platform_data/gpio-davinci.h
+++ b/include/linux/platform_data/gpio-davinci.h
@@ -34,7 +34,7 @@ struct davinci_gpio_platform_data {
struct davinci_gpio_controller {
struct gpio_chip chip;
- int irq_base;
+ struct irq_domain *irq_domain;
/* Serialize access to GPIO registers */
spinlock_t lock;
void __iomem *regs;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list