[PATCH v2 4/4] ARM: imx50: use clock defines in DTS files
Lucas Stach
l.stach at pengutronix.de
Thu Nov 14 05:10:16 EST 2013
For better readablitity and no need to look up numbers
in the documentation anymore.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
arch/arm/boot/dts/imx50.dtsi | 78 ++++++++++++++++++++++++++++----------------
1 file changed, 50 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index c547e29b8e87..4de61a5edb35 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -97,7 +97,9 @@
compatible = "fsl,imx50-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
- clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -107,7 +109,9 @@
compatible = "fsl,imx50-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
- clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -117,7 +121,8 @@
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
- clocks = <&clks 32>, <&clks 33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -128,7 +133,8 @@
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
- clocks = <&clks 51>, <&clks 52>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -137,7 +143,7 @@
compatible = "fsl,imx50-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
- clocks = <&clks 49>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -147,7 +153,9 @@
compatible = "fsl,imx50-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
- clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -157,7 +165,9 @@
compatible = "fsl,imx50-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
- clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -168,7 +178,7 @@
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
- clocks = <&clks 124>;
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
status = "disabled";
};
@@ -176,7 +186,7 @@
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
- clocks = <&clks 125>;
+ clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
status = "disabled";
};
@@ -184,7 +194,7 @@
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
status = "disabled";
};
@@ -192,7 +202,7 @@
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
status = "disabled";
};
@@ -240,14 +250,15 @@
compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
};
gpt: timer at 53fa0000 {
compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
- clocks = <&clks 36>, <&clks 41>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
@@ -265,7 +276,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
- clocks = <&clks 37>, <&clks 38>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -274,7 +286,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
- clocks = <&clks 39>, <&clks 40>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -283,7 +296,8 @@
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
- clocks = <&clks 28>, <&clks 29>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -292,7 +306,8 @@
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
- clocks = <&clks 30>, <&clks 31>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -336,7 +351,7 @@
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
- clocks = <&clks 88>;
+ clocks = <&clks IMX5_CLK_I2C3_GATE>;
status = "disabled";
};
@@ -344,7 +359,8 @@
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
- clocks = <&clks 65>, <&clks 66>;
+ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+ <&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -361,7 +377,8 @@
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
- clocks = <&clks 67>, <&clks 68>;
+ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+ <&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -369,7 +386,7 @@
owire: owire at 63fa4000 {
compatible = "fsl,imx50-owire", "fsl,imx21-owire";
reg = <0x63fa4000 0x4000>;
- clocks = <&clks 159>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
status = "disabled";
};
@@ -379,7 +396,8 @@
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
- clocks = <&clks 53>, <&clks 54>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -388,7 +406,8 @@
compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
- clocks = <&clks 56>, <&clks 56>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
};
@@ -399,7 +418,8 @@
compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 55>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -410,7 +430,7 @@
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
- clocks = <&clks 35>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
status = "disabled";
};
@@ -420,7 +440,7 @@
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
- clocks = <&clks 34>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
status = "disabled";
};
@@ -428,7 +448,7 @@
compatible = "fsl,imx50-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
- clocks = <&clks 48>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -444,7 +464,9 @@
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
- clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
--
1.8.4.2
More information about the linux-arm-kernel
mailing list