[PATCH 4/5] ARM: dts: imx53: Add AHCI SATA binding

[Shawn Guo]

On Sun, Nov 17, 2013 at 02:20:50AM +0100, Marek Vasut wrote:
> The AHCI-IMX driver now supports i.MX53 as well. Add DT binding.

I think this patch can be merged independently without the driver
changes in place.  Also, I understand that the term 'binding' is
referred as binding doc, while what you're patching here is device tree
source.

Shawn

> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Cc: Richard Zhu <r65037 at freescale.com>
> Cc: Tejun Heo <tj at kernel.org>
> Cc: Linux-IDE <linux-ide at vger.kernel.org>
> ---
>  arch/arm/boot/dts/imx53.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
> index cffdda2..0e92af0 100644
> --- a/arch/arm/boot/dts/imx53.dtsi
> +++ b/arch/arm/boot/dts/imx53.dtsi
> @@ -85,6 +85,15 @@
>  		interrupt-parent = <&tzic>;
>  		ranges;
>  
> +		sata: sata at 10000000 {
> +			compatible = "fsl,imx53-ahci";
> +			reg = <0x10000000 0x1000>;
> +			interrupts = <28>;
> +			clocks =  <&clks 173>, <&clks 188>, <&clks 5>;
> +			clock-names = "sata_gate", "sata_phy", "ahb";
> +			status = "disabled";
> +		};
> +
>  		ipu: ipu at 18000000 {
>  			#crtc-cells = <1>;
>  			compatible = "fsl,imx53-ipu";
> -- 
> 1.8.4.2
>