[PATCH 8/8] ARM: dts: imx: sabrelite: add dualLite support
Troy Kisky
troy.kisky at boundarydevices.com
Thu Nov 14 16:02:14 EST 2013
This makes the structure of imx6qdl-sabrelite.dtsi the same
as imx6qdl-sabresd.dtsi so that they are easier to compare.
It also adds the file imx6dl-sabrelite.dts for dualLite
support.
Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6dl-sabrelite.dts | 20 +++
arch/arm/boot/dts/imx6q-sabrelite.dts | 214 +----------------------------
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 226 +++++++++++++++++++++++++++++++
4 files changed, 248 insertions(+), 213 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-sabrelite.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b14bb11..743fbd8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -144,6 +144,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6dl-gw53xx.dtb \
imx6dl-gw54xx.dtb \
imx6dl-sabreauto.dtb \
+ imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
new file mode 100644
index 0000000..2de0447
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+ model = "Freescale i.MX6 DualLite SABRE Lite Board";
+ compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index b5f0edd..96e4688 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -12,225 +12,13 @@
/dts-v1/;
#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
/ {
model = "Freescale i.MX6 Quad SABRE Lite Board";
compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
- memory {
- reg = <0x10000000 0x40000000>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_2p5v: regulator at 0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: regulator at 2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
-};
-
-&audmux {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux>;
-};
-
-&ecspi1 {
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio3 19 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- status = "okay";
-
- flash: m25p80 at 0 {
- compatible = "sst,sst25vf016b";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
-
- codec: sgtl5000 at 0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks 201>;
- VDDA-supply = <®_2p5v>;
- VDDIO-supply = <®_3p3v>;
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- imx6q-sabrelite {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
- MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
- >;
- };
-
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <MX6QDL_AUDMUX_PINGRP1>;
- };
-
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <MX6QDL_ECSPI1_PINGRP1>;
- };
-
- pinctrl_enet: enetgrp {
- fsl,pins = <MX6QDL_ENET_PINGRP1>;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <MX6QDL_I2C1_PINGRP1>;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <MX6QDL_UART2_PINGRP1>;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
- };
-
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <MX6QDL_USDHC4_PINGRP_D4>;
- };
- };
-};
-
-&ldb {
- status = "okay";
-
- lvds-channel at 0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&timing0>;
- timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- };
- };
- };
};
&sata {
status = "okay";
};
-
-&ssi1 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
-};
-
-&usbh1 {
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
- wp-gpios = <&gpio7 1 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
-
-&usdhc4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio2 6 0>;
- wp-gpios = <&gpio2 7 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
new file mode 100644
index 0000000..2797566
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator at 0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80 at 0 {
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 0>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-sabrelite {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <MX6QDL_AUDMUX_PINGRP1>;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <MX6QDL_ECSPI1_PINGRP1>;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <MX6QDL_ENET_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX6QDL_I2C1_PINGRP1>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX6QDL_UART2_PINGRP1>;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <MX6QDL_USDHC4_PINGRP_D4>;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel at 0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ wp-gpios = <&gpio7 1 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio2 6 0>;
+ wp-gpios = <&gpio2 7 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
--
1.8.1.2
More information about the linux-arm-kernel
mailing list