[PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found

[Tony Lindgren]

* Javier Martinez Canillas <javier.martinez at collabora.co.uk> [131116 05:25]:
> On Device Tree boot the VDDS_DSI regulator is not linked to
> the DPI device so omapfb driver probing fails with:
> 
> [    3.186035] OMAPFB: omapfb_probe
> [    3.190704] omapdss DPI error: can't get VDDS_DSI regulator
> [    3.196594] omapfb omapfb: failed to connect default display
> [    3.202667] omapfb omapfb: failed to init overlay connections
> [    3.208892] OMAPFB: free_resources
> [    3.212493] OMAPFB: free all fbmem
> [    3.216735] omapfb omapfb: failed to setup omapfb
> 
> As a workaround try to use the VPLL2 regulator from twl4030 in
> dpi_init_regulator() if getting the VDDS_DSI regulator fails.

Probably makes sens to fix this in the dpi.c, but this can also be set
in the .dts file. I just set up the following in the omap3-ldp.dts file:

&vaux1 {
	/* Needed for ads7846 */
	regulator-name = "vcc";
};

&vpll2 {
	/* Needed for DSS */
	regulator-name = "vdds_dsi";
};

Regards,

Tony

 
> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
> ---
>  drivers/video/omap2/dss/dpi.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
> index bd48cde..e328f0b 100644
> --- a/drivers/video/omap2/dss/dpi.c
> +++ b/drivers/video/omap2/dss/dpi.c
> @@ -550,6 +550,11 @@ static int dpi_init_regulator(void)
>  		return 0;
>  
>  	vdds_dsi = devm_regulator_get(&dpi.pdev->dev, "vdds_dsi");
> +
> +        /* DT HACK: try VPLL2 to make omapdss work for OMAP3 IGEPv2 */
> +        if (IS_ERR(vdds_dsi))
> +                vdds_dsi = devm_regulator_get(&dpi.pdev->dev, "VPLL2");
> +
>  	if (IS_ERR(vdds_dsi)) {
>  		DSSERR("can't get VDDS_DSI regulator\n");
>  		return PTR_ERR(vdds_dsi);
> -- 
> 1.8.4.2
>