[PATCH 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers

[Srikanth Thokala]

There are no specific interrupts for the PONG buffer on both
transmit and receive side, same interrupt is valid for both
buffers. So, this patch removes this code.

Signed-off-by: Srikanth Thokala <sthokal at xilinx.com>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 38 ---------------------------
 1 file changed, 38 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index a7c02f4..3a693a1 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -164,26 +164,9 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata)
 	__raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
 		     drvdata->base_addr + XEL_TSR_OFFSET);
 
-	/* Enable the Tx interrupts for the second Buffer if
-	 * configured in HW */
-	if (drvdata->tx_ping_pong != 0) {
-		reg_data = __raw_readl(drvdata->base_addr +
-				   XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
-		__raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
-			     drvdata->base_addr + XEL_BUFFER_OFFSET +
-			     XEL_TSR_OFFSET);
-	}
-
 	/* Enable the Rx interrupts for the first buffer */
 	__raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET);
 
-	/* Enable the Rx interrupts for the second Buffer if
-	 * configured in HW */
-	if (drvdata->rx_ping_pong != 0) {
-		__raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr +
-			     XEL_BUFFER_OFFSET + XEL_RSR_OFFSET);
-	}
-
 	/* Enable the Global Interrupt Enable */
 	__raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);
 }
@@ -207,31 +190,10 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata)
 	__raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
 		     drvdata->base_addr + XEL_TSR_OFFSET);
 
-	/* Disable the Tx interrupts for the second Buffer
-	 * if configured in HW */
-	if (drvdata->tx_ping_pong != 0) {
-		reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
-				   XEL_TSR_OFFSET);
-		__raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
-			     drvdata->base_addr + XEL_BUFFER_OFFSET +
-			     XEL_TSR_OFFSET);
-	}
-
 	/* Disable the Rx interrupts for the first buffer */
 	reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET);
 	__raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
 		     drvdata->base_addr + XEL_RSR_OFFSET);
-
-	/* Disable the Rx interrupts for the second buffer
-	 * if configured in HW */
-	if (drvdata->rx_ping_pong != 0) {
-
-		reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
-				   XEL_RSR_OFFSET);
-		__raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
-			     drvdata->base_addr + XEL_BUFFER_OFFSET +
-			     XEL_RSR_OFFSET);
-	}
 }
 
 /**
-- 
1.8.2.GIT