[PATCH 6/8] ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH
Troy Kisky
troy.kisky at boundarydevices.com
Thu Nov 14 16:02:12 EST 2013
Make the interrupts node slightly more readable.
Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
arch/arm/boot/dts/imx6sl.dtsi | 125 +++++++++++++++++++++++-------------------
1 file changed, 68 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 000e1b4..a4d88d0 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "skeleton.dtsi"
#include "imx6sl-pinfunc.h"
#include "imx6sl-pingrp.h"
@@ -77,7 +78,7 @@
L2: l2-cache at 00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
- interrupts = <0 92 0x04>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
arm,tag-latency = <4 2 3>;
@@ -86,7 +87,7 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 0x04>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
aips1: aips-bus at 02000000 {
@@ -105,7 +106,7 @@
spdif: spdif at 02004000 {
reg = <0x02004000 0x4000>;
- interrupts = <0 52 0x04>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
};
ecspi1: ecspi at 02008000 {
@@ -113,7 +114,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
- interrupts = <0 31 0x04>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI1>,
<&clks IMX6SL_CLK_ECSPI1>;
clock-names = "ipg", "per";
@@ -125,7 +126,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
- interrupts = <0 32 0x04>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI2>,
<&clks IMX6SL_CLK_ECSPI2>;
clock-names = "ipg", "per";
@@ -137,7 +138,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
- interrupts = <0 33 0x04>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI3>,
<&clks IMX6SL_CLK_ECSPI3>;
clock-names = "ipg", "per";
@@ -149,7 +150,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
- interrupts = <0 34 0x04>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI4>,
<&clks IMX6SL_CLK_ECSPI4>;
clock-names = "ipg", "per";
@@ -160,7 +161,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
- interrupts = <0 30 0x04>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -173,7 +174,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
- interrupts = <0 26 0x04>;
+ interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -186,7 +187,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
- interrupts = <0 27 0x04>;
+ interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -198,7 +199,7 @@
ssi1: ssi at 02028000 {
compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
- interrupts = <0 46 0x04>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI1>;
dmas = <&sdma 37 1 0>,
<&sdma 38 1 0>;
@@ -210,7 +211,7 @@
ssi2: ssi at 0202c000 {
compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
- interrupts = <0 47 0x04>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI2>;
dmas = <&sdma 41 1 0>,
<&sdma 42 1 0>;
@@ -222,7 +223,7 @@
ssi3: ssi at 02030000 {
compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
- interrupts = <0 48 0x04>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI3>;
dmas = <&sdma 45 1 0>,
<&sdma 46 1 0>;
@@ -235,7 +236,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
- interrupts = <0 28 0x04>;
+ interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -248,7 +249,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02038000 0x4000>;
- interrupts = <0 29 0x04>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -262,7 +263,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
- interrupts = <0 83 0x04>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM1>,
<&clks IMX6SL_CLK_PWM1>;
clock-names = "ipg", "per";
@@ -272,7 +273,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
- interrupts = <0 84 0x04>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM2>,
<&clks IMX6SL_CLK_PWM2>;
clock-names = "ipg", "per";
@@ -282,7 +283,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
- interrupts = <0 85 0x04>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM3>,
<&clks IMX6SL_CLK_PWM3>;
clock-names = "ipg", "per";
@@ -292,7 +293,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
- interrupts = <0 86 0x04>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM4>,
<&clks IMX6SL_CLK_PWM4>;
clock-names = "ipg", "per";
@@ -301,7 +302,7 @@
gpt: gpt at 02098000 {
compatible = "fsl,imx6sl-gpt";
reg = <0x02098000 0x4000>;
- interrupts = <0 55 0x04>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_GPT>,
<&clks IMX6SL_CLK_GPT_SERIAL>;
clock-names = "ipg", "per";
@@ -310,7 +311,8 @@
gpio1: gpio at 0209c000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
- interrupts = <0 66 0x04 0 67 0x04>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+ <0 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -320,7 +322,8 @@
gpio2: gpio at 020a0000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
- interrupts = <0 68 0x04 0 69 0x04>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 69 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -330,7 +333,8 @@
gpio3: gpio at 020a4000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
- interrupts = <0 70 0x04 0 71 0x04>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 71 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -340,7 +344,8 @@
gpio4: gpio at 020a8000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
- interrupts = <0 72 0x04 0 73 0x04>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+ <0 73 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -350,7 +355,8 @@
gpio5: gpio at 020ac000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
- interrupts = <0 74 0x04 0 75 0x04>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+ <0 75 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -359,20 +365,20 @@
kpp: kpp at 020b8000 {
reg = <0x020b8000 0x4000>;
- interrupts = <0 82 0x04>;
+ interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
};
wdog1: wdog at 020bc000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
- interrupts = <0 80 0x04>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
};
wdog2: wdog at 020c0000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
- interrupts = <0 81 0x04>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
status = "disabled";
};
@@ -380,7 +386,8 @@
clks: ccm at 020c4000 {
compatible = "fsl,imx6sl-ccm";
reg = <0x020c4000 0x4000>;
- interrupts = <0 87 0x04 0 88 0x04>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
};
@@ -389,7 +396,9 @@
"fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
- interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 54 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1 at 110 {
compatible = "fsl,anatop-regulator";
@@ -488,14 +497,14 @@
usbphy1: usbphy at 020c9000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
- interrupts = <0 44 0x04>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBPHY1>;
};
usbphy2: usbphy at 020ca000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
- interrupts = <0 45 0x04>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBPHY2>;
};
@@ -508,31 +517,33 @@
snvs-rtc-lp at 34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
- interrupts = <0 19 0x04 0 20 0x04>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
};
};
epit1: epit at 020d0000 {
reg = <0x020d0000 0x4000>;
- interrupts = <0 56 0x04>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
epit2: epit at 020d4000 {
reg = <0x020d4000 0x4000>;
- interrupts = <0 57 0x04>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
src: src at 020d8000 {
compatible = "fsl,imx6sl-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
- interrupts = <0 91 0x04 0 96 0x04>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+ <0 96 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: gpc at 020dc000 {
compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
- interrupts = <0 89 0x04>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
};
gpr: iomuxc-gpr at 020e0000 {
@@ -548,18 +559,18 @@
csi: csi at 020e4000 {
reg = <0x020e4000 0x4000>;
- interrupts = <0 7 0x04>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
spdc: spdc at 020e8000 {
reg = <0x020e8000 0x4000>;
- interrupts = <0 6 0x04>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
sdma: sdma at 020ec000 {
compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
- interrupts = <0 2 0x04>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SDMA>,
<&clks IMX6SL_CLK_SDMA>;
clock-names = "ipg", "ahb";
@@ -570,22 +581,22 @@
pxp: pxp at 020f0000 {
reg = <0x020f0000 0x4000>;
- interrupts = <0 98 0x04>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
};
epdc: epdc at 020f4000 {
reg = <0x020f4000 0x4000>;
- interrupts = <0 97 0x04>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
};
lcdif: lcdif at 020f8000 {
reg = <0x020f8000 0x4000>;
- interrupts = <0 39 0x04>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
};
dcp: dcp at 020fc000 {
reg = <0x020fc000 0x4000>;
- interrupts = <0 99 0x04>;
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -599,7 +610,7 @@
usbotg1: usb at 02184000 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
- interrupts = <0 43 0x04>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
@@ -609,7 +620,7 @@
usbotg2: usb at 02184200 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
- interrupts = <0 42 0x04>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
@@ -619,7 +630,7 @@
usbh: usb at 02184400 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
- interrupts = <0 40 0x04>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
@@ -635,7 +646,7 @@
fec: ethernet at 02188000 {
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
- interrupts = <0 114 0x04>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ENET_REF>,
<&clks IMX6SL_CLK_ENET_REF>;
clock-names = "ipg", "ahb";
@@ -645,7 +656,7 @@
usdhc1: usdhc at 02190000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
- interrupts = <0 22 0x04>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC1>,
<&clks IMX6SL_CLK_USDHC1>,
<&clks IMX6SL_CLK_USDHC1>;
@@ -657,7 +668,7 @@
usdhc2: usdhc at 02194000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
- interrupts = <0 23 0x04>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC2>,
<&clks IMX6SL_CLK_USDHC2>,
<&clks IMX6SL_CLK_USDHC2>;
@@ -669,7 +680,7 @@
usdhc3: usdhc at 02198000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
- interrupts = <0 24 0x04>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC3>,
<&clks IMX6SL_CLK_USDHC3>,
<&clks IMX6SL_CLK_USDHC3>;
@@ -681,7 +692,7 @@
usdhc4: usdhc at 0219c000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
- interrupts = <0 25 0x04>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC4>,
<&clks IMX6SL_CLK_USDHC4>,
<&clks IMX6SL_CLK_USDHC4>;
@@ -695,7 +706,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
- interrupts = <0 36 0x04>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C1>;
status = "disabled";
};
@@ -705,7 +716,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
- interrupts = <0 37 0x04>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C2>;
status = "disabled";
};
@@ -715,7 +726,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
- interrupts = <0 38 0x04>;
+ interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C3>;
status = "disabled";
};
@@ -727,12 +738,12 @@
rngb: rngb at 021b4000 {
reg = <0x021b4000 0x4000>;
- interrupts = <0 5 0x04>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
weim: weim at 021b8000 {
reg = <0x021b8000 0x4000>;
- interrupts = <0 14 0x04>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
};
ocotp: ocotp at 021bc000 {
--
1.8.1.2
More information about the linux-arm-kernel
mailing list