[PATCH v2] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif

Santosh Shilimkar santosh.shilimkar at ti.com
Fri Nov 29 09:53:54 EST 2013


On Thursday 28 November 2013 11:38 PM, Sekhar Nori wrote:
> On Wednesday 27 November 2013 08:01 PM, Ivan Khoronzhuk wrote:
>> The problem that the set timings code contains the call of Davinci
>> platform function davinci_aemif_setup_timing() which is not
>> accessible if kernel is built for another platform like Keystone.
>>
>> The Keysone platform is going to use TI AEMIF driver.
>> If TI AEMIF is used we don't need to set timings and bus width.
>> It is done by AEMIF driver.
>>
>> To get rid of davinci-nand driver dependency on aemif platform code
>> we moved aemif code to davinci platform.
>>
>> The platform AEMIF code (aemif.c) has to be removed once Davinci
>> will be converted to DT and use ti-aemif.c driver.
>>
>> The long device name "davinci_ntosd2_nandflash_device" was renamed
>> to "ntosd2_nandflash" as requested by Sekhar Nori, because after
>> adding changes the line is so broken that its almost unreadable.
>>
>> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
> 
> This patch can be simplified in some places.
> 
>> ---
>> v2..v1:
>> - enabled AEMIF clock
>> - removed EXPORT_SYMBOL(davinci_aemif_setup)
>> - renamed ugly name davinci_ntosd2_nandflash_device
>>
>> CC:
>> Sekhar Nori <nsekhar at ti.com>
>>
>>  arch/arm/mach-davinci/aemif.c                   |   89 ++++++++++++++++++++++-
>>  arch/arm/mach-davinci/board-da830-evm.c         |    3 +
>>  arch/arm/mach-davinci/board-da850-evm.c         |    3 +
>>  arch/arm/mach-davinci/board-dm355-evm.c         |    5 ++
>>  arch/arm/mach-davinci/board-dm355-leopard.c     |    5 ++
>>  arch/arm/mach-davinci/board-dm365-evm.c         |    4 +
>>  arch/arm/mach-davinci/board-dm644x-evm.c        |    5 ++
>>  arch/arm/mach-davinci/board-dm646x-evm.c        |    3 +
>>  arch/arm/mach-davinci/board-mityomapl138.c      |    3 +
>>  arch/arm/mach-davinci/board-neuros-osd2.c       |   13 +++-
>>  arch/arm/mach-davinci/devices-tnetv107x.c       |    3 +
>>  drivers/mtd/nand/davinci_nand.c                 |   23 ------
>>  include/linux/platform_data/mtd-davinci-aemif.h |    5 +-
> 
> Most of these boards dont really have a timing structure defined.
> Instead of blindly calling AEMIF setup on all boards, it can be
> done only on boards that actually need it.
>
Make sense to me.

 
>>  /*
>>   * aemif_calc_rate - calculate timing data.
>>   * @wanted: The cycle time needed in nanoseconds.
>> @@ -86,7 +98,7 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max)
>>   *
>>   * Returns 0 on success, else negative errno.
>>   */
>> -int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
>> +static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
> 
> passing the clkrate to this function helps avoid a repeated clk_get().
> I made these changes locally and here is the updated patch:
>
probably a good idea.
 
> ---8<---
> From cdea7d6f753db09447fe2232959864ab999fe565 Mon Sep 17 00:00:00 2001
> From: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
> Date: Wed, 27 Nov 2013 16:31:34 +0200
> Subject: [PATCH 1/1] ARM: davinci: aemif: get rid of davinci-nand driver
>  dependency on aemif
> 
> The problem that the set timings code contains the call of Davinci
> platform function davinci_aemif_setup_timing() which is not
> accessible if kernel is built for another platform like Keystone.
> 
> The Keysone platform is going to use TI AEMIF driver.
> If TI AEMIF is used we don't need to set timings and bus width.
> It is done by AEMIF driver. The TI AEMIF driver cannot
> be used on all current DaVinci platforms since it is DT-only.
> 
> To get rid of davinci-nand driver dependency on aemif platform code
> we moved aemif code to davinci platform.
> 
> The platform AEMIF code (aemif.c) has to be removed once Davinci
> will be converted to DT and use ti-aemif.c driver.
> 
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
> Signed-off-by: Sekhar Nori <nsekhar at ti.com>
> ---
>  arch/arm/mach-davinci/aemif.c                   |  106 ++++++++++++++++++++---
>  arch/arm/mach-davinci/board-da830-evm.c         |    3 +
>  arch/arm/mach-davinci/board-da850-evm.c         |    3 +
>  arch/arm/mach-davinci/board-dm644x-evm.c        |    5 ++
>  arch/arm/mach-davinci/board-dm646x-evm.c        |    3 +
Ivan commented same need for board-mityomapl138.c as well.


>  drivers/mtd/nand/davinci_nand.c                 |   23 -----
>  include/linux/platform_data/mtd-davinci-aemif.h |    5 +-
>  7 files changed, 112 insertions(+), 36 deletions(-)
> 
Apart from that one board question, I think the patch is nicely
breaking the hard dependency with nand driver and machine code
making easier for re-use.

FWIW,
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>

Regards,
Santosh





More information about the linux-arm-kernel mailing list