[PATCH RFC v2 17/17] ARM: shmobile: Remove Marzen reference DTS
Simon Horman
horms+renesas at verge.net.au
Tue Nov 26 02:32:19 EST 2013
Now that the DTS file r8a7790-marzen.dts can be used with
board-marzen.c and board-marzen-reference.c, proceed with removing
r8a7790-marzen-reference.dts.
Based on work for the Koelsch board by Laurent Pinchart.
Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen-reference.dts | 110 -------------------------
1 file changed, 110 deletions(-)
delete mode 100644 arch/arm/boot/dts/r8a7779-marzen-reference.dts
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
deleted file mode 100644
index 13fa8be..0000000
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Reference Device Tree Source for the Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "marzen";
- compatible = "renesas,marzen-reference", "renesas,r8a7779";
-
- chosen {
- bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
- };
-
- memory {
- device_type = "memory";
- reg = <0x60000000 0x40000000>;
- };
-
- fixedregulator3v3: fixedregulator at 0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- lan0 at 18000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x18000000 0x100>;
- pinctrl-0 = <&lan0_pins>;
- pinctrl-names = "default";
-
- phy-mode = "mii";
- interrupt-parent = <&irqpin0>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- reg-io-width = <4>;
- vddvario-supply = <&fixedregulator3v3>;
- vdd33a-supply = <&fixedregulator3v3>;
- };
-
- leds {
- compatible = "gpio-leds";
- led2 {
- gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
- };
- led3 {
- gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
- };
- led4 {
- gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&irqpin0 {
- status = "okay";
-};
-
-&pfc {
- pinctrl-0 = <&scif2_pins &scif4_pins>;
- pinctrl-names = "default";
-
- lan0_pins: lan0 {
- intc {
- renesas,groups = "intc_irq1_b";
- renesas,function = "intc";
- };
- lbsc {
- renesas,groups = "lbsc_ex_cs0";
- renesas,function = "lbsc";
- };
- };
-
- scif2_pins: serial2 {
- renesas,groups = "scif2_data_c";
- renesas,function = "scif2";
- };
-
- scif4_pins: serial4 {
- renesas,groups = "scif4_data";
- renesas,function = "scif4";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd",
- "sdhi0_wp";
- renesas,function = "sdhi0";
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&fixedregulator3v3>;
- bus-width = <4>;
- status = "okay";
-};
--
1.8.4
More information about the linux-arm-kernel
mailing list