[PATCH V2] media: i2c: Add ADV761X support

[Linus Walleij]

On Fri, Nov 29, 2013 at 1:14 PM, Valentine
<valentine.barshak at cogentembedded.com> wrote:
> On 11/29/2013 02:45 PM, Lars-Peter Clausen wrote:
>> On 11/29/2013 11:37 AM, Linus Walleij wrote:

>>> So I guess the answer to the question is something like, fix
>>> the GPIO driver to stop requiring the GPIO lines to be requested
>>> and configured before being used as IRQs, delete that code,
>>> and while you're at it add a call to gpiod_lock_as_irq()
>>> to your GPIO driver in the right spot: examples are on the
>>> mailing list and my mark-irqs branch in the GPIO tree.
>>
>> As far as I understand it this already works more or less with the driver.
>> The problem is that the IRQ numbers are dynamically allocated, while the
>> GPIO numbers apparently are not. So the board code knows the the GPIO
>> number
>> at compile time and can pass this to the diver which then does a
>> gpio_to_irq
>> to lookup the IRQ number.
(...)
>> This of course isn't really a problem with
>> devicetree, but only with platform board code.
>
> I'm not sure what's the difference here and why it is not a problem with
> devicetree?

It's no problem when using devicetree because you can obtain
the GPIOs directly from the node with of_get_gpio()
and of_get_named_gpio() in the special DT probe path.

But don't do that! Instead switch the whole driver, and preferably
the whole platform, to use descriptors.

Yours,
Linus Walleij