[PATCH v3 3/4] ARM: imx51: use clock defines in DTS files

Lucas Stach l.stach at pengutronix.de
Thu Nov 14 05:18:59 EST 2013


For better readability and no need to look up numbers
in the documentation anymore.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm/boot/dts/imx51.dtsi | 98 +++++++++++++++++++++++++++-----------------
 1 file changed, 61 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 1097492ebd69..ee35090af346 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -14,6 +14,7 @@
 #include "imx51-pinfunc.h"
 #include "imx51-pingrp.h"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/imx5-clock.h>
 
 / {
 	aliases {
@@ -71,7 +72,8 @@
 			compatible = "arm,cortex-a8";
 			reg = <0>;
 			clock-latency = <62500>;
-			clocks = <&clks 24>;
+			clocks = <&clks IMX5_CLK_CPU_PODF>;
+			clock-names = "cpu";
 			operating-points = <
 				166000	1000000
 				600000	1050000
@@ -98,7 +100,9 @@
 			compatible = "fsl,imx51-ipu";
 			reg = <0x40000000 0x20000000>;
 			interrupts = <11 10>;
-			clocks = <&clks 59>, <&clks 110>, <&clks 61>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+			         <&clks IMX5_CLK_IPU_DI0_GATE>,
+			         <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 		};
@@ -121,7 +125,9 @@
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
-					clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					status = "disabled";
 				};
@@ -130,7 +136,9 @@
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
-					clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -140,7 +148,8 @@
 					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 					reg = <0x7000c000 0x4000>;
 					interrupts = <33>;
-					clocks = <&clks 32>, <&clks 33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+					         <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -151,7 +160,8 @@
 					compatible = "fsl,imx51-ecspi";
 					reg = <0x70010000 0x4000>;
 					interrupts = <36>;
-					clocks = <&clks 51>, <&clks 52>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -160,7 +170,7 @@
 					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 					reg = <0x70014000 0x4000>;
 					interrupts = <30>;
-					clocks = <&clks 49>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
 					dmas = <&sdma 24 1 0>,
 					       <&sdma 25 1 0>;
 					dma-names = "rx", "tx";
@@ -173,7 +183,9 @@
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
-					clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -183,7 +195,9 @@
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
-					clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -192,7 +206,7 @@
 
 			usbphy0: usbphy at 0 {
 				compatible = "usb-nop-xceiv";
-				clocks = <&clks 75>;
+				clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
 				clock-names = "main_clk";
 				status = "okay";
 			};
@@ -201,7 +215,7 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
 				interrupts = <18>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
@@ -211,7 +225,7 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80200 0x0200>;
 				interrupts = <14>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
@@ -220,7 +234,7 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80400 0x0200>;
 				interrupts = <16>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
@@ -229,7 +243,7 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80600 0x0200>;
 				interrupts = <17>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
@@ -238,7 +252,7 @@
 				#index-cells = <1>;
 				compatible = "fsl,imx51-usbmisc";
 				reg = <0x73f80800 0x200>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 			};
 
 			gpio1: gpio at 73f84000 {
@@ -285,7 +299,7 @@
 				compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
 				reg = <0x73f94000 0x4000>;
 				interrupts = <60>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 				status = "disabled";
 			};
 
@@ -293,14 +307,14 @@
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 			};
 
 			wdog2: wdog at 73f9c000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f9c000 0x4000>;
 				interrupts = <59>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 				status = "disabled";
 			};
 
@@ -308,7 +322,8 @@
 				compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
 				reg = <0x73fa0000 0x4000>;
 				interrupts = <39>;
-				clocks = <&clks 36>, <&clks 41>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+				         <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -321,7 +336,8 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb4000 0x4000>;
-				clocks = <&clks 37>, <&clks 38>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -330,7 +346,8 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb8000 0x4000>;
-				clocks = <&clks 39>, <&clks 40>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -339,7 +356,8 @@
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fbc000 0x4000>;
 				interrupts = <31>;
-				clocks = <&clks 28>, <&clks 29>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+				         <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -348,7 +366,8 @@
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fc0000 0x4000>;
 				interrupts = <32>;
-				clocks = <&clks 30>, <&clks 31>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+				         <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -378,14 +397,14 @@
 				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
-				clocks = <&clks 107>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
 			};
 
 			owire: owire at 83fa4000 {
 				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
 				reg = <0x83fa4000 0x4000>;
 				interrupts = <88>;
-				clocks = <&clks 159>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
 				status = "disabled";
 			};
 
@@ -395,7 +414,8 @@
 				compatible = "fsl,imx51-ecspi";
 				reg = <0x83fac000 0x4000>;
 				interrupts = <37>;
-				clocks = <&clks 53>, <&clks 54>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -404,7 +424,8 @@
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
-				clocks = <&clks 56>, <&clks 56>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+				         <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
@@ -416,7 +437,8 @@
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
 				reg = <0x83fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 55>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -427,7 +449,7 @@
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 				reg = <0x83fc4000 0x4000>;
 				interrupts = <63>;
-				clocks = <&clks 35>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
 				status = "disabled";
 			};
 
@@ -437,7 +459,7 @@
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 				reg = <0x83fc8000 0x4000>;
 				interrupts = <62>;
-				clocks = <&clks 34>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
 				status = "disabled";
 			};
 
@@ -445,7 +467,7 @@
 				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 				reg = <0x83fcc000 0x4000>;
 				interrupts = <29>;
-				clocks = <&clks 48>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
 				dmas = <&sdma 28 0 0>,
 				       <&sdma 29 0 0>;
 				dma-names = "rx", "tx";
@@ -457,7 +479,7 @@
 			audmux: audmux at 83fd0000 {
 				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
 				reg = <0x83fd0000 0x4000>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 				clock-names = "audmux";
 				status = "disabled";
 			};
@@ -467,7 +489,7 @@
 				#size-cells = <1>;
 				compatible = "fsl,imx51-weim";
 				reg = <0x83fda000 0x1000>;
-				clocks = <&clks 57>;
+				clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
 				ranges = <
 					0 0 0xb0000000 0x08000000
 					1 0 0xb8000000 0x08000000
@@ -483,7 +505,7 @@
 				compatible = "fsl,imx51-nand";
 				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
 				interrupts = <8>;
-				clocks = <&clks 60>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
 				status = "disabled";
 			};
 
@@ -491,7 +513,7 @@
 				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
 				reg = <0x83fe0000 0x4000>;
 				interrupts = <70>;
-				clocks = <&clks 172>;
+				clocks = <&clks IMX5_CLK_PATA_GATE>;
 				status = "disabled";
 			};
 
@@ -499,7 +521,7 @@
 				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 				reg = <0x83fe8000 0x4000>;
 				interrupts = <96>;
-				clocks = <&clks 50>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
 				dmas = <&sdma 46 0 0>,
 				       <&sdma 47 0 0>;
 				dma-names = "rx", "tx";
@@ -512,7 +534,9 @@
 				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;
-				clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
-- 
1.8.4.2




More information about the linux-arm-kernel mailing list