[PATCH 8/9] ARM: at91/dt: add new at91rm9200ek_mmc board

Nicolas Ferre nicolas.ferre at atmel.com
Thu Nov 21 03:44:08 EST 2013


On 20/11/2013 18:27, Jean-Christophe PLAGNIOL-VILLARD :
> On 17:31 Wed 20 Nov     , boris brezillon wrote:
>> On 20/11/2013 16:02, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>> On 14:37 Wed 28 Aug     , Boris BREZILLON wrote:
>>>> Add a new at91rm9200ek_mmc board (based on at91rm9200ek board) which enables
>>>> mmc0/slot0.
>>> no for multiple dts
>>>
>>> this need to handle at user space level
>>
>> You mean, by controlling the regulator using the sysfs interface, or
>> by loading
>> only the appropriate driver ?
> load the partial dts via userspace

Right, but Jean-Christophe, we know that DT fragments are not available 
in mainline yet (even if the effort is ongoing). So what should we do in 
the meantime?

>> What if both drivers are loaded (or not compiled as modules) ?
>> This will lead to one device being unusable (and maybe even worst)...
>>
> this will never be the case

Can you please elaborate? It is a bit frustrating to have to ask you 
again and again to explain more your thoughts...

Bye,

> Best Regards,
> J.
>> Please explain what you had in mind ?
>>
>>>
>>> Best Regards,
>>> J.
>>>> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
>>>> ---
>>>>   arch/arm/boot/dts/at91rm9200ek_mmc.dts |   23 +++++++++++++++++++++++
>>>>   1 file changed, 23 insertions(+)
>>>>   create mode 100644 arch/arm/boot/dts/at91rm9200ek_mmc.dts
>>>>
>>>> diff --git a/arch/arm/boot/dts/at91rm9200ek_mmc.dts b/arch/arm/boot/dts/at91rm9200ek_mmc.dts
>>>> new file mode 100644
>>>> index 0000000..c87a861
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/at91rm9200ek_mmc.dts
>>>> @@ -0,0 +1,23 @@
>>>> +/*
>>>> + * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit with
>>>> + *                    an MMC slot
>>>> + *
>>>> + *  Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
>>>> + *
>>>> + * Licensed under GPLv2 only
>>>> + */
>>>> +/dts-v1/;
>>>> +#include "at91rm9200ek.dts"
>>>> +
>>>> +/ {
>>>> +	model = "Atmel AT91RM9200 evaluation kit with MMC slot";
>>>> +	compatible = "atmel,at91rm9200ek-mmc", "atmel,at91rm9200ek", "atmel,at91rm9200";
>>>> +
>>>> +	ahb {
>>>> +		apb {
>>>> +			mmc0: mmc at fffb4000 {
>>>> +				status = "okay";
>>>> +			};
>>>> +		};
>>>> +	};
>>>> +};
>>>> --
>>>> 1.7.9.5
>>>>
>>
>


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list