[PATCH v3 13/28] mtd: nand: pxa3xx: Add bad block handling
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Tue Nov 5 07:55:20 EST 2013
Add support for flash-based bad block table using Marvell's
custom in-flash bad block table layout. The support is enabled
a 'flash_bbt' platform data or device tree parameter.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 33 +++++++++++++++++++++++++++
include/linux/platform_data/mtd-nand-pxa3xx.h | 3 +++
2 files changed, 36 insertions(+)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index e198c94..9a5913d 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_mtd.h>
#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#define ARCH_HAS_DMA
@@ -245,6 +246,29 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
{ "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] },
};
+static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
+static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 8,
+ .len = 6,
+ .veroffs = 14,
+ .maxblocks = 8, /* Last 8 blocks in each chip */
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 8,
+ .len = 6,
+ .veroffs = 14,
+ .maxblocks = 8, /* Last 8 blocks in each chip */
+ .pattern = bbt_mirror_pattern
+};
+
/* Define a default flash type setting serve as flash detecting only */
#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
@@ -1128,6 +1152,14 @@ KEEP_CONFIG:
if (nand_scan_ident(mtd, 1, def))
return -ENODEV;
+
+ if (pdata->flash_bbt) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH |
+ NAND_BBT_NO_OOB_BBM;
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+ }
+
/* calculate addressing information */
if (mtd->writesize >= 2048)
host->col_addr_cycles = 2;
@@ -1323,6 +1355,7 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
if (of_get_property(np, "marvell,nand-keep-config", NULL))
pdata->keep_config = 1;
of_property_read_u32(np, "num-cs", &pdata->num_cs);
+ pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
pdev->dev.platform_data = pdata;
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
index ffb8019..a941471 100644
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -55,6 +55,9 @@ struct pxa3xx_nand_platform_data {
/* indicate how many chip selects will be used */
int num_cs;
+ /* use an flash-based bad block table */
+ bool flash_bbt;
+
const struct mtd_partition *parts[NUM_CHIP_SELECT];
unsigned int nr_parts[NUM_CHIP_SELECT];
--
1.8.1.5
More information about the linux-arm-kernel
mailing list