[PATCH 3/3] serial: mxs-auart: move irq handling to a tasklet

Hector Palacios hector.palacios at digi.com
Fri Nov 29 13:04:49 EST 2013


On 11/29/2013 06:00 PM, Marek Vasut wrote:
> Dear Hector Palacios,
>
>> The ISR was handling CTS flag and RX/TX processing.
>> Occasionally interrupts were coming in the middle of the ISR and
>> led to blocking transmission (with hw flow) or loss of data.
>> This patch moves this processing to a tasklet that the ISR schedules.
>>
>> Signed-off-by: Hector Palacios <hector.palacios at digi.com>
>> ---
>>   drivers/tty/serial/mxs-auart.c | 61
>> +++++++++++++++++++++++++++--------------- 1 file changed, 39
>> insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/tty/serial/mxs-auart.c
>> b/drivers/tty/serial/mxs-auart.c index e5540c89dd48..7021269c70b2 100644
>> --- a/drivers/tty/serial/mxs-auart.c
>> +++ b/drivers/tty/serial/mxs-auart.c
>> @@ -148,6 +148,10 @@ struct mxs_auart_port {
>>   	struct clk *clk;
>>   	struct device *dev;
>>
>> +	struct tasklet_struct tasklet;
>> +	unsigned int irq_status;
>> +	unsigned int status;
>> +
>>   	/* for DMA */
>>   	struct scatterlist tx_sgl;
>>   	struct dma_chan	*tx_dma_chan;
>> @@ -680,38 +684,48 @@ static void mxs_auart_settermios(struct uart_port *u,
>>   	}
>>   }
>>
>> +/*
>> + * tasklet handling tty stuff outside the interrupt handler.
>> + */
>> +static void mxs_auart_tasklet_func(unsigned long data)
>> +{
>> +	struct uart_port *port = (struct uart_port *)data;
>> +	struct mxs_auart_port *s = to_auart_port(port);
>> +
>> +	/* Handle status irq */
>> +	if (s->irq_status & AUART_INTR_CTSMIS) {
>> +		uart_handle_cts_change(&s->port, s->status & AUART_STAT_CTS);
>> +		writel(AUART_INTR_CTSMIS,
>> +		       s->port.membase + AUART_INTR_CLR);
>> +	}
>> +	/* Handle receive irq */
>> +	if (s->irq_status & (AUART_INTR_RTIS | AUART_INTR_RXIS)) {
>> +		if (!auart_dma_enabled(s))
>> +			mxs_auart_rx_chars(s);
>> +	}
>> +	/* Handle transmit irq */
>> +	if (s->irq_status & AUART_INTR_TXIS)
>> +		mxs_auart_tx_chars(s);
>> +}
>> +
>>   static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
>>   {
>> -	u32 istat;
>>   	struct mxs_auart_port *s = context;
>> -	u32 stat = readl(s->port.membase + AUART_STAT);
>>
>> -	istat = readl(s->port.membase + AUART_INTR);
>> +	s->status = readl(s->port.membase + AUART_STAT);
>> +	s->irq_status = readl(s->port.membase + AUART_INTR);
>
> Aren't you up for a nice race condition here if you get interrupt while checking
> the s->irq_status bits in the tasklet ?

Sad, but true. :-(
But if I need to wait on the ISR for the tasklet to process then this patch loses its 
original meaning. Argh... it works so nicely!

Best regards,
--
Hector Palacios



More information about the linux-arm-kernel mailing list