[PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver
Maxime Ripard
maxime.ripard at free-electrons.com
Wed Nov 6 09:13:57 EST 2013
Hi Carlo,
On Wed, Oct 30, 2013 at 11:38:57PM +0100, Carlo Caione wrote:
> This patch introduces the driver for the RTC in the Allwinner A10 and
> A20 SoCs.
>
> Signed-off-by: Carlo Caione <carlo.caione at gmail.com>
> ---
> v1->v2:
> - Patch split in two
> - Fix coding style
> - New driver description
> - Rework macros
> - Add comments
> - Change while in for cycles
>
> v2->v3
> - Fix comments
> - Rename alarm->alrm
> - Fix comments style
> - Remove useless newline
> ---
> drivers/rtc/Kconfig | 7 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-sunxi.c | 491 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 499 insertions(+)
> create mode 100644 drivers/rtc/rtc-sunxi.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 9654aa3..ef45e0b 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1076,6 +1076,13 @@ config RTC_DRV_SUN4V
> If you say Y here you will get support for the Hypervisor
> based RTC on SUN4V systems.
>
> +config RTC_DRV_SUNXI
> + tristate "Allwinner sun4i/sun7i RTC"
> + depends on ARCH_SUNXI
> + help
> + If you say Y here you will get support for the RTC found on
> + Allwinner A10/A20.
> +
> config RTC_DRV_STARFIRE
> bool "Starfire RTC"
> depends on SPARC64
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index 2dff3d2..8b52b5a 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -115,6 +115,7 @@ obj-$(CONFIG_RTC_DRV_STARFIRE) += rtc-starfire.o
> obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o
> obj-$(CONFIG_RTC_DRV_STMP) += rtc-stmp3xxx.o
> obj-$(CONFIG_RTC_DRV_SUN4V) += rtc-sun4v.o
> +obj-$(CONFIG_RTC_DRV_SUNXI) += rtc-sunxi.o
> obj-$(CONFIG_RTC_DRV_TEGRA) += rtc-tegra.o
> obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
> obj-$(CONFIG_RTC_DRV_TILE) += rtc-tile.o
> diff --git a/drivers/rtc/rtc-sunxi.c b/drivers/rtc/rtc-sunxi.c
> new file mode 100644
> index 0000000..89c331f
> --- /dev/null
> +++ b/drivers/rtc/rtc-sunxi.c
> @@ -0,0 +1,491 @@
> +/*
> + * An RTC driver for Allwinner A10/A20
> + *
> + * Copyright (c) 2013, Carlo Caione <carlo.caione at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/fs.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/rtc.h>
> +#include <linux/types.h>
> +
> +#define SUNXI_LOSC_CTRL 0x0000
> +#define SUNXI_LOSC_CTRL_RTC_HMS_ACC BIT(8)
> +#define SUNXI_LOSC_CTRL_RTC_YMD_ACC BIT(7)
> +
> +#define SUNXI_RTC_YMD 0x0004
> +
> +#define SUNXI_RTC_HMS 0x0008
> +
> +#define SUNXI_ALRM_DHMS 0x000c
> +
> +#define SUNXI_ALRM_EN 0x0014
> +#define SUNXI_ALRM_EN_CNT_EN BIT(8)
> +
> +#define SUNXI_ALRM_IRQ_EN 0x0018
> +#define SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN BIT(0)
> +
> +#define SUNXI_ALRM_IRQ_STA 0x001c
> +#define SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND BIT(0)
> +
> +#define SUNXI_LOSC_CTRL_RTC_ACC \
> + (SUNXI_LOSC_CTRL_RTC_HMS_ACC | SUNXI_LOSC_CTRL_RTC_YMD_ACC)
> +
> +#define SUNXI_MASK_DH 0x0000001f
> +#define SUNXI_MASK_SM 0x0000003f
> +#define SUNXI_MASK_M 0x0000000f
> +#define SUNXI_MASK_LY 0x00000001
> +#define SUNXI_MASK_D 0x00000ffe
> +#define SUNXI_MASK_M 0x0000000f
> +
> +#define SUNXI_GET(x, mask, shift) (((x) & ((mask) << (shift))) \
> + >> (shift))
> +
> +#define SUNXI_SET(x, mask, shift) (((x) & (mask)) << (shift))
> +
> +/* Get date values */
> +#define SUNXI_DATE_GET_DAY_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 0)
> +#define SUNXI_DATE_GET_MON_VALUE(x) SUNXI_GET(x, SUNXI_MASK_M, 8)
> +#define SUNXI_DATE_GET_YEAR_VALUE(x, mask) SUNXI_GET(x, mask, 16)
> +
> +/* Get time values */
> +#define SUNXI_TIME_GET_SEC_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 0)
> +#define SUNXI_TIME_GET_MIN_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 8)
> +#define SUNXI_TIME_GET_HOUR_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 16)
> +
> +/* Get alarm values */
> +#define SUNXI_ALRM_GET_SEC_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 0)
> +#define SUNXI_ALRM_GET_MIN_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 8)
> +#define SUNXI_ALRM_GET_HOUR_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 16)
> +
> +/* Set date values */
> +#define SUNXI_DATE_SET_DAY_VALUE(x) SUNXI_DATE_GET_DAY_VALUE(x)
> +#define SUNXI_DATE_SET_MON_VALUE(x) SUNXI_SET(x, SUNXI_MASK_M, 8)
> +#define SUNXI_DATE_SET_YEAR_VALUE(x, mask) SUNXI_SET(x, mask, 16)
> +#define SUNXI_LEAP_SET_VALUE(x, shift) SUNXI_SET(x, SUNXI_MASK_LY, shift)
> +
> +/* Set time values */
> +#define SUNXI_TIME_SET_SEC_VALUE(x) SUNXI_TIME_GET_SEC_VALUE(x)
> +#define SUNXI_TIME_SET_MIN_VALUE(x) SUNXI_SET(x, SUNXI_MASK_SM, 8)
> +#define SUNXI_TIME_SET_HOUR_VALUE(x) SUNXI_SET(x, SUNXI_MASK_DH, 16)
> +
> +/* set alarm values */
> +#define SUNXI_ALRM_SET_SEC_VALUE(x) SUNXI_ALRM_GET_SEC_VALUE(x)
> +#define SUNXI_ALRM_SET_MIN_VALUE(x) SUNXI_SET(x, SUNXI_MASK_SM, 8)
> +#define SUNXI_ALRM_SET_HOUR_VALUE(x) SUNXI_SET(x, SUNXI_MASK_DH, 16)
> +#define SUNXI_ALRM_SET_DAY_VALUE(x) SUNXI_SET(x, SUNXI_MASK_D, 21)
> +
> +/* time unit conversions */
> +#define SEC_IN_MIN 60
> +#define SEC_IN_HOUR (60 * SEC_IN_MIN)
> +#define SEC_IN_DAY (24 * SEC_IN_HOUR)
> +
> +struct sunxi_rtc_data_year {
> + unsigned int min; /* min year allowed */
> + unsigned int max; /* max year allowed */
> + unsigned int off; /* year offset to get the current year */
> + unsigned int mask;
> + unsigned char leap_shift; /* bit shift to get the leap year */
> +};
> +
> +static struct sunxi_rtc_data_year data_year_param[] = {
> + [0] = {
> + .min = 1970,
> + .max = 2100,
> + .off = 0,
> + .mask = 0x000000ff,
> + .leap_shift = 24,
> + },
> + [1] = {
> + .min = 2010,
> + .max = 2073,
> + .off = 110,
> + .mask = 0x0000003f,
> + .leap_shift = 22,
> + },
> +};
> +
> +struct sunxi_rtc_dev {
> + struct rtc_device *rtc;
> + struct device *dev;
> + struct sunxi_rtc_data_year *data_year;
> + void __iomem *base;
> + int irq;
> +};
> +
> +static irqreturn_t sunxi_rtc_alarmirq(int irq, void *id)
> +{
> + struct sunxi_rtc_dev *chip = (struct sunxi_rtc_dev *) id;
> + u32 val;
> +
> + val = readl(chip->base + SUNXI_ALRM_IRQ_STA);
> +
> + if (val & SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND) {
> + val |= SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND;
> + writel(val, chip->base + SUNXI_ALRM_IRQ_STA);
> +
> + rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
> +
> + return IRQ_HANDLED;
> + }
> +
> + return IRQ_NONE;
> +}
> +
> +static void sunxi_rtc_setaie(int to, struct sunxi_rtc_dev *chip)
> +{
> + u32 alrm_val = 0;
> + u32 alrm_irq_val = 0;
> +
> + if (to) {
> + alrm_val = readl(chip->base + SUNXI_ALRM_EN);
> + alrm_val |= SUNXI_ALRM_EN_CNT_EN;
> +
> + alrm_irq_val = readl(chip->base + SUNXI_ALRM_IRQ_EN);
> + alrm_irq_val |= SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN;
> + } else {
> + writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND,
> + chip->base + SUNXI_ALRM_IRQ_STA);
> + }
> +
> + writel(alrm_val, chip->base + SUNXI_ALRM_EN);
> + writel(alrm_irq_val, chip->base + SUNXI_ALRM_IRQ_EN);
> +}
> +
> +static int sunxi_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
> +{
> + struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
> + struct rtc_time *alrm_tm = &wkalrm->time;
> + u32 alrm;
> + u32 alrm_en;
> + u32 date;
> +
> + alrm = readl(chip->base + SUNXI_ALRM_DHMS);
> + date = readl(chip->base + SUNXI_RTC_YMD);
> +
> + alrm_tm->tm_sec = SUNXI_ALRM_GET_SEC_VALUE(alrm);
> + alrm_tm->tm_min = SUNXI_ALRM_GET_MIN_VALUE(alrm);
> + alrm_tm->tm_hour = SUNXI_ALRM_GET_HOUR_VALUE(alrm);
> +
> + alrm_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date);
> + alrm_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date);
> + alrm_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date,
> + chip->data_year->mask);
> +
> + alrm_tm->tm_year += chip->data_year->off;
> + alrm_tm->tm_mon -= 1;
> +
> + alrm_en = readl(chip->base + SUNXI_ALRM_IRQ_EN);
> + if (alrm_en & SUNXI_ALRM_EN_CNT_EN)
> + wkalrm->enabled = 1;
> +
> + return 0;
> +}
> +
> +static int sunxi_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
> +{
> + struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
> + u32 date, time;
> + int t;
> +
> + /*
> + * read again if the system was mid-updated
> + */
> + for (t = 0; t < 2; t++) {
> + date = readl(chip->base + SUNXI_RTC_YMD);
> + time = readl(chip->base + SUNXI_RTC_HMS);
> +
> + rtc_tm->tm_sec = SUNXI_TIME_GET_SEC_VALUE(time);
> + rtc_tm->tm_min = SUNXI_TIME_GET_MIN_VALUE(time);
> + rtc_tm->tm_hour = SUNXI_TIME_GET_HOUR_VALUE(time);
> +
> + rtc_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date);
> + rtc_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date);
> + rtc_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date,
> + chip->data_year->mask);
> +
> + if (rtc_tm->tm_sec == 0)
> + msleep(500);
> + else
> + break;
So this means that whenever the time actually has a number of seconds
= 0, you just loop over, adding a 500ms delay? That seems pretty
inefficient to me.
Also, what happens if you get two times in a row a number of seconds
equals to 0?
This kind of construct seems really really odd, and doesn't the issue
you were trying to address.
However, this looks like a common issue. Have you looked at the other
drivers to see how they are handling it? Maybe Alessandro will have
some suggestions as well.
> + }
> +
> + rtc_tm->tm_year += chip->data_year->off;
> + rtc_tm->tm_mon -= 1;
> +
> + return rtc_valid_tm(rtc_tm);
> +}
> +
> +static int sunxi_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
> +{
> + struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
> + struct rtc_time *alrm_tm = &wkalrm->time;
> + struct rtc_time tm_now;
> + u32 alrm = 0;
> + unsigned long time_now = 0;
> + unsigned long time_set = 0;
> + unsigned long time_gap = 0;
> + unsigned long time_gap_day = 0;
> + unsigned long time_gap_hour = 0;
> + unsigned long time_gap_min = 0;
> + int ret = 0;
> +
> + ret = sunxi_rtc_gettime(dev, &tm_now);
> + if (ret < 0) {
> + dev_err(dev, "Error in getting time\n");
> + return -EINVAL;
> + }
> +
> + rtc_tm_to_time(alrm_tm, &time_set);
> + rtc_tm_to_time(&tm_now, &time_now);
> + if (time_set <= time_now) {
> + dev_err(dev, "Date to set in the past\n");
> + return -EINVAL;
> + }
> +
> + time_gap = time_set - time_now;
> + time_gap_day = time_gap / SEC_IN_DAY;
> + time_gap -= time_gap_day * SEC_IN_DAY;
> + time_gap_hour = time_gap / SEC_IN_HOUR;
> + time_gap -= time_gap_hour * SEC_IN_HOUR;
> + time_gap_min = time_gap / SEC_IN_MIN;
> + time_gap -= time_gap_min * SEC_IN_MIN;
> +
> + if (time_gap_day > 255) {
> + dev_err(dev, "Day must be in the range 0 - 255\n");
> + return -EINVAL;
> + }
> +
> + sunxi_rtc_setaie(0, chip);
> + writel(0, chip->base + SUNXI_ALRM_DHMS);
> + usleep_range(100, 300);
> +
> + alrm = SUNXI_ALRM_SET_SEC_VALUE(time_gap) |
> + SUNXI_ALRM_SET_MIN_VALUE(time_gap_min) |
> + SUNXI_ALRM_SET_HOUR_VALUE(time_gap_hour) |
> + SUNXI_ALRM_SET_DAY_VALUE(time_gap_day);
> + writel(alrm, chip->base + SUNXI_ALRM_DHMS);
> +
> + writel(0, chip->base + SUNXI_ALRM_IRQ_EN);
> + writel(SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN, chip->base + SUNXI_ALRM_IRQ_EN);
> +
> + sunxi_rtc_setaie(wkalrm->enabled, chip);
> +
> + return 0;
> +}
> +
> +static int sunxi_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
> +{
> + struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
> + u32 date = 0;
> + u32 time = 0;
> + int year;
> + int t;
> +
> + year = rtc_tm->tm_year + 1900;
So, that means that the A10 RTC starts a year 1900, and the A20 at
year 2010? Why not just put those in your year_offset field directly?
> + if (year < chip->data_year->min || year > chip->data_year->max) {
> + dev_err(dev, "rtc only supports year in range %d - %d\n",
> + chip->data_year->min, chip->data_year->max);
> + return -EINVAL;
> + }
> +
> + rtc_tm->tm_year -= chip->data_year->off;
> + rtc_tm->tm_mon += 1;
> +
> + date = SUNXI_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
> + SUNXI_DATE_SET_MON_VALUE(rtc_tm->tm_mon) |
> + SUNXI_DATE_SET_YEAR_VALUE(rtc_tm->tm_year,
> + chip->data_year->mask);
> +
> + if (is_leap_year(year))
> + date |= SUNXI_LEAP_SET_VALUE(1, chip->data_year->leap_shift);
> +
> + time = SUNXI_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) |
> + SUNXI_TIME_SET_MIN_VALUE(rtc_tm->tm_min) |
> + SUNXI_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
> +
> + writel(0, chip->base + SUNXI_RTC_HMS);
> + writel(0, chip->base + SUNXI_RTC_YMD);
> +
> + writel(time, chip->base + SUNXI_RTC_HMS);
> +
> + /*
> + * After writing the RCT HH-MM-SS register, the
> + * SUNXI_LOSC_CTRL_RTC_HMS_ACC bit is set and it will be cleared until
> + * the real writing operation is finished
> + */
> + for (t = 0; t < 3; t++) {
> + if ((readl(chip->base + SUNXI_LOSC_CTRL) &
> + SUNXI_LOSC_CTRL_RTC_HMS_ACC) && --t)
> + break;
> + else
> + msleep(50);
> + }
> + if (t == 0) {
> + dev_err(dev, "Failed to set rtc time.\n");
> + return -1;
> + }
Why not just busy-wait ? (with a timeout if you really want to).
> +
> + writel(date, chip->base + SUNXI_RTC_YMD);
> +
> + /*
> + * After writing the RCT YY-MM-DD register, the
> + * SUNXI_LOSC_CTRL_RTC_YMD_ACC bit is set and it will be cleared until
> + * the real writing operation is finished
> + */
> + for (t = 0; t < 3; t++) {
> + if ((readl(chip->base + SUNXI_LOSC_CTRL) &
> + SUNXI_LOSC_CTRL_RTC_YMD_ACC) && --t)
> + break;
> + else
> + msleep(50);
> + }
Ditto.
> + if (t == 0) {
> + dev_err(dev, "Failed to set rtc date.\n");
> + return -1;
> + }
> +
> + /*
> + * wait about 70us to make sure the the time is really written into
> + * target
> + */
> + usleep_range(70, 100);
Isn't the write operation supposed to be done already?
> + return 0;
> +}
> +
> +static int sunxi_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
> +{
> + struct sunxi_rtc_dev *chip = dev_get_drvdata(dev);
> +
> + if (!enabled)
> + sunxi_rtc_setaie(enabled, chip);
> +
> + return 0;
> +}
> +
> +static const struct rtc_class_ops sunxi_rtc_ops = {
> + .read_time = sunxi_rtc_gettime,
> + .set_time = sunxi_rtc_settime,
> + .read_alarm = sunxi_rtc_getalarm,
> + .set_alarm = sunxi_rtc_setalarm,
> + .alarm_irq_enable = sunxi_rtc_alarm_irq_enable
> +};
> +
> +static const struct of_device_id sunxi_rtc_dt_ids[] = {
> + { .compatible = "allwinner,sun4i-rtc", .data = &data_year_param[0] },
> + { .compatible = "allwinner,sun7i-a20-rtc", .data = &data_year_param[1] },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, sunxi_rtc_dt_ids);
> +
> +static int sunxi_rtc_probe(struct platform_device *pdev)
> +{
> + struct sunxi_rtc_dev *chip;
> + struct resource *res;
> + const struct of_device_id *of_id;
> + int ret;
> +
> + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, chip);
> + chip->dev = &pdev->dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + chip->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(chip->base))
> + return PTR_ERR(chip->base);
> +
> + chip->irq = platform_get_irq(pdev, 0);
> + if (chip->irq < 0) {
> + dev_err(&pdev->dev, "No IRQ resource\n");
> + return chip->irq;
> + }
> + ret = devm_request_irq(&pdev->dev, chip->irq, sunxi_rtc_alarmirq,
> + 0, dev_name(&pdev->dev), chip);
> + if (ret) {
> + dev_err(&pdev->dev, "Could not request IRQ\n");
> + return ret;
> + }
> +
> + of_id = of_match_device(sunxi_rtc_dt_ids, &pdev->dev);
> + if (!of_id) {
> + dev_err(&pdev->dev, "Unable to setup RTC data\n");
> + return -ENODEV;
> + }
> + chip->data_year = (struct sunxi_rtc_data_year *) of_id->data;
> +
> + /* clear the alarm count value */
> + writel(0, chip->base + SUNXI_ALRM_DHMS);
> +
> + /* disable alarm, not generate irq pending */
> + writel(0, chip->base + SUNXI_ALRM_EN);
> +
> + /* disable alarm week/cnt irq, unset to cpu */
> + writel(0, chip->base + SUNXI_ALRM_IRQ_EN);
> +
> + /* clear alarm week/cnt irq pending */
> + writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND, chip->base + SUNXI_ALRM_IRQ_STA);
> +
> + chip->rtc = rtc_device_register("rtc-sunxi", &pdev->dev,
> + &sunxi_rtc_ops, THIS_MODULE);
> + if (IS_ERR(chip->rtc)) {
> + dev_err(&pdev->dev, "unable to register device\n");
> + return PTR_ERR(chip->rtc);
> + }
> +
> + dev_info(&pdev->dev, "RTC enabled\n");
> +
> + return 0;
> +}
> +
> +static int sunxi_rtc_remove(struct platform_device *pdev)
> +{
> + struct sunxi_rtc_dev *chip = platform_get_drvdata(pdev);
> +
> + rtc_device_unregister(chip->rtc);
> +
> + return 0;
> +}
> +
> +static struct platform_driver sunxi_rtc_driver = {
> + .probe = sunxi_rtc_probe,
> + .remove = sunxi_rtc_remove,
> + .driver = {
> + .name = "sunxi-rtc",
> + .owner = THIS_MODULE,
> + .of_match_table = sunxi_rtc_dt_ids,
> + },
> +};
> +
> +module_platform_driver(sunxi_rtc_driver);
> +
> +MODULE_DESCRIPTION("sunxi RTC driver");
> +MODULE_AUTHOR("Carlo Caione <carlo.caione at gmail.com>");
> +MODULE_LICENSE("GPL");
> --
> 1.8.4.2
>
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131106/fc6a4e0d/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list