[PATCH v3 08/11] usb: phy-mxs: Enable IC fixes for related SoCs

[Michał Mirosław]

2013/11/5 Peter Chen <peter.chen at freescale.com>
>
> Some PHY bugs are fixed by IC logic, but these bits are not
> enabled by default, so we enable them at driver.
>
> Signed-off-by: Peter Chen <peter.chen at freescale.com>
> ---
>  drivers/usb/phy/phy-mxs-usb.c |   32 ++++++++++++++++++++++++++++++--
>  1 files changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index c794011..b7e1744 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -31,6 +31,10 @@
>  #define HW_USBPHY_CTRL_SET                     0x34
>  #define HW_USBPHY_CTRL_CLR                     0x38
>
> +#define HW_USBPHY_IP                           0x90
> +#define HW_USBPHY_IP_SET                       0x94
> +#define HW_USBPHY_IP_CLR                       0x98
> +
>  #define BM_USBPHY_CTRL_SFTRST                  BIT(31)
>  #define BM_USBPHY_CTRL_CLKGATE                 BIT(30)
>  #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS       BIT(26)
> @@ -60,6 +64,18 @@
>   */
>  #define MXS_PHY_SENDING_SOF_TOO_FAST           BIT(2)
>
> +/*
> + * IC fix for MXS_PHY_ABNORAML_IN_SUSPEND, bit 17 is the effective bit
> + * in HW_USBPHY_IP.
> + */
> +#define MXS_PHY_FIX_ABNORAML_IN_SUSPEND                BIT(17)
[...]

s/ABNORAML/ABNORMAL/ ?

Best Regards,
Michał Mirosław