[PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode

[Jason Cooper]

Jason,

On Mon, Nov 04, 2013 at 05:27:19PM -0700, Jason Gunthorpe wrote:
> Commit cc9d4598 'net: mv643xx_eth: use of_phy_connect if phy_node

fyi: set core.abbrev = 12 in your git config, according to Linus, 7/8
was a bad decision...

> present' made the call to phy_scan optional, if the DT has a link to
> the phy node.
> 
> However phy_scan has the side effect of calling phy_addr_set, which
> writes the phy MDIO address to the ethernet controller. If phy_addr_set
> is not called, and the bootloader has not set the correct address then
> the driver will fail to function.
> 
> Tested on Kirkwood.
> 
> Signed-off-by: Jason Gunthorpe <jgunthorpe at obsidianresearch.com>

Fixes: cc9d459894b0 "net: mv643xx_eth: use of_phy_connect if phy_node present"
Acked-by: Jason Cooper <jason at lakedaemon.net>

And it should be suitable for v3.11+

thx,

Jason.