[PATCH 1/2] ARM: dts: imx53-mba53: create a container for fixed regulators

Shawn Guo shawn.guo at linaro.org
Wed Nov 6 03:03:12 EST 2013


To align with others on fixed regulators bindings, it adds node
'regulators' as the container and move all regulator-fixed nodes into
there.

Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
 arch/arm/boot/dts/imx53-mba53.dts |   32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index ba95b78..c9ff1a5 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -17,14 +17,6 @@
 	model = "TQ MBa53 starter kit";
 	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
 
-	reg_backlight: fixed at 0 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-supply";
-		gpio = <&gpio2 5 0>;
-		startup-delay-us = <5000>;
-		enable-active-low;
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm2 0 50000>;
@@ -43,12 +35,24 @@
 		status = "disabled";
 	};
 
-	reg_3p2v: 3p2v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P2V";
-		regulator-min-microvolt = <3200000>;
-		regulator-max-microvolt = <3200000>;
-		regulator-always-on;
+	regulators {
+		compatible = "simple-bus";
+
+		reg_backlight: fixed at 0 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd-supply";
+			gpio = <&gpio2 5 0>;
+			startup-delay-us = <5000>;
+			enable-active-low;
+		};
+
+		reg_3p2v: 3p2v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
 	};
 
 	sound {
-- 
1.7.9.5





More information about the linux-arm-kernel mailing list