October 2012 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Mon Oct 1 00:08:29 EDT 2012
Ending: Wed Oct 31 23:45:58 EDT 2012
Messages: 6044

• # (c) 2007, Joe Perches <joe at perches.com>   Vaibhav Hiremath
• # (c) 2007, Joe Perches <joe at perches.com>   Vaibhav Hiremath
• 3.7-rc-1 Release Causing application failure for compilation   Prabhakar Lad
• 3.7-rc-1 Release Causing application failure for compilation   Baruch Siach
• 3.7-rc-1 Release Causing application failure for compilation   Prabhakar Lad
• 3.7-rc2 fails to build exynos target   Alexander Graf
• 3.7-rc2 fails to build exynos target   Mark A. Greer
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Daniel Mack
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Hebbar, Gururaja
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Daniel Mack
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Hebbar, Gururaja
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Daniel Mack
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Matt Porter
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Peter Ujfalusi
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Mark Brown
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Daniel Mack
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Sekhar Nori
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Daniel Mack
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Matt Porter
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Matt Porter
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Matt Porter
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Daniel Mack
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Matt Porter
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Daniel Mack
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Porter, Matt
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Daniel Mack
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Matt Porter
• [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Daniel Mack
• [alsa-devel] [PATCH v2 1/2] ARM: imx: clk: Split SSI clock into 'ipg' and 'per'   Fabio Estevam
• [alsa-devel] [PATCH v2 1/2] ARM: imx: clk: Split SSI clock into 'ipg' and 'per'   Fabio Estevam
• [alsa-devel] [PATCH v2 1/2] ARM: imx: clk: Split SSI clock into 'ipg' and 'per'   Sascha Hauer
• [ath9k-devel] [PATCH net-next 00/21] treewide: Use consistent api style for address testing   Pavel Roskin
• [BUG] read_current_timer undefined   Guennadi Liakhovetski
• [BUG] read_current_timer undefined   Will Deacon
• [Celinux-dev] PDF documentation   Bill Traynor
• [Celinux-dev] PDF documentation   Wolfgang Denk
• [Celinux-dev] PDF documentation   Tim Bird
• [Celinux-dev] PDF documentation   Wolfgang Denk
• [Celinux-dev] PDF documentation   shiraz hashim
• [Celinux-dev] PDF documentation   Tim Bird
• [Celinux-dev] PDF documentation   Constantine Shulyupin
• [Celinux-dev] PDF documentation   Geert Uytterhoeven
• [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch   Olof Johansson
• [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch   Linus Torvalds
• [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch   Linus Torvalds
• [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch   Olof Johansson
• [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch   Olof Johansson
• [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch   Tony Lindgren
• [GIT PULL 0/3] ARM: mvebu/kirkwood/dove fixes for v3.7   Jason Cooper
• [GIT PULL 0/9] ARM architecture fixes for 3.7   Arnd Bergmann
• [GIT PULL 0/9] ARM architecture fixes for 3.7   Russell King - ARM Linux
• [GIT PULL 0/9] ARM architecture fixes for 3.7   Stefano Stabellini
• [GIT PULL 0/9] ARM architecture fixes for 3.7   Arnd Bergmann
• [GIT PULL 0/9] ARM architecture fixes for 3.7   Stefano Stabellini
• [GIT PULL 0/9] ARM architecture fixes for 3.7   Will Deacon
• [GIT PULL 1/12] ARM: soc: non-critical bug fixes   Olof Johansson
• [GIT PULL 1/3] ARM: Dove: fixes for v3.7   Jason Cooper
• [GIT PULL 1/3] ARM: Dove: fixes for v3.7   Olof Johansson
• [GIT PULL 1/3] omap plat header removal for v3.8 merge window, part2   Tony Lindgren
• [GIT PULL 1/5] omap fixes for v3.7-rc1   Tony Lindgren
• [GIT PULL 1/5] omap fixes for v3.7-rc1   Olof Johansson
• [GIT PULL 10/12] ARM: soc: device tree updates, take 2   Olof Johansson
• [GIT PULL 11/12] ARM: soc: documentation updates   Olof Johansson
• [GIT PULL 12/12] ARM: soc: multiplatform enablement   Olof Johansson
• [GIT PULL 2/12] ARM: soc: general cleanups   Olof Johansson
• [GIT PULL 2/3] ARM: mvebu: fix for v3.7   Jason Cooper
• [GIT PULL 2/3] ARM: mvebu: fix for v3.7   Olof Johansson
• [GIT PULL 2/3] omap plat header removal for v3.8 merge window, part3   Tony Lindgren
• [GIT PULL 2/5] omap hwmod and clock fixes for v3.7-rc1   Tony Lindgren
• [GIT PULL 3/12] ARM: soc: MAINTAINERS updates   Olof Johansson
• [GIT PULL 3/3] ARM: Kirkwood: fix for v3.7   Jason Cooper
• [GIT PULL 3/3] ARM: Kirkwood: fix for v3.7   Olof Johansson
• [GIT PULL 3/3] omap prcm cleanup for v3.8 merge window, part1   Tony Lindgren
• [GIT PULL 3/5] omap pm fixes for v3.7-rc1   Tony Lindgren
• [GIT PULL 4/12] ARM: soc: soc-specific updates   Olof Johansson
• [GIT PULL 4/5] omap cpufreq fixes for v3.7-rc1   Tony Lindgren
• [GIT PULL 5/12] ARM: soc: device tree updates   Olof Johansson
• [GIT PULL 5/5] omap asoc regression fixes for v3.7-rc1   Tony Lindgren
• [GIT PULL 6/12] ARM: soc: cleanups, part 2   Olof Johansson
• [GIT PULL 7/12] ARM: soc: soc-specific updates, take 2   Olof Johansson
• [GIT PULL 8/12] ARM: soc: driver specific changes   Olof Johansson
• [GIT PULL 9/12] ARM: soc: board specific updates   Olof Johansson
• [GIT PULL][for 3.7] pull request from upload/fix in arch-pxa git tree   Haojian Zhuang
• [GIT PULL][for 3.8] pull request from upload/board in arch-pxa git tree   Haojian Zhuang
• [GIT PULL][for 3.8] pull request of serial branch from arch pxa git tree   Haojian Zhuang
• [GIT PULL][for 3.8] pull request of serial branch from arch pxa git tree   Greg KH
• [GIT PULL][for 3.8] pull request of serial branch from arch pxa git tree   Haojian Zhuang
• [GIT PULL] arm-soc fixes for 3.7-rc3   Arnd Bergmann
• [GIT PULL] ARM: mvebu: cache-l2x0 DT for v3.7   Gregory CLEMENT
• [GIT PULL] ARM: OMAP2+: first set of PRM/CM cleanups for 3.8   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: first set of PRM/CM cleanups for 3.8   Tony Lindgren
• [GIT PULL] ARM: OMAP: CPUfreq fixes for v3.7-rc   Kevin Hilman
• [GIT PULL] ARM: OMAP: fix build, sparse problems in cleanup-headers   Paul Walmsley
• [GIT PULL] ARM: OMAP: fix build, sparse problems in cleanup-headers   Tony Lindgren
• [GIT PULL] ARM: OMAP: more hwmod/PRCM fixes for 3.7-rc   Paul Walmsley
• [GIT PULL] ARM: OMAP: more hwmod/PRCM fixes for 3.7-rc   Paul Walmsley
• [GIT PULL] ARM: OMAP: PM fixes for v3.7-rc   Kevin Hilman
• [GIT PULL] ARM: OMAP: PM fixes for v3.7-rc3   Kevin Hilman
• [GIT PULL] ARM: OMAP: PM fixes for v3.7-rc3   Tony Lindgren
• [GIT PULL] ARM: OMAP: warnings/hwmod/clock fixes for pre-3.7-rc1   Paul Walmsley
• [GIT PULL] ARM: OMAP: warnings/hwmod/clock fixes for pre-3.7-rc1   Tony Lindgren
• [GIT PULL] ARM: OMAP: warnings/hwmod/clock fixes for pre-3.7-rc1   Paul Walmsley
• [GIT PULL] ARM: OMAP: warnings/hwmod/clock fixes for pre-3.7-rc1   Tony Lindgren
• [GIT PULL] ARM: soc: defconfig updates   Olof Johansson
• [GIT PULL] ARM: soc: late platform updates   Olof Johansson
• [GIT PULL] ARM: SoC fixes   Olof Johansson
• [GIT PULL] ARM: soc fixes for -rc2   Olof Johansson
• [GIT PULL] ARM: tegra: fixes for 3.7-rc2   Stephen Warren
• [GIT PULL] ARM: tegra: fixes for 3.7-rc2   Olof Johansson
• [GIT PULL] at91: fixes for 3.7-rc3   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.7-rc3   Arnd Bergmann
• [GIT PULL] at91: fixes for 3.7-rc3   Arnd Bergmann
• [GIT PULL] at91: fixes for 3.7-rc3   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] Calxeda ECX-2000 support   Rob Herring
• [GIT PULL] clk: changes for 3.7   Mike Turquette
• [GIT PULL] CMA and DMA-mapping fixes for v3.7-rc3   Marek Szyprowski
• [GIT PULL] CMA and DMA-mapping updates for v3.7   Marek Szyprowski
• [GIT PULL] Convert arch-vt8500 to multiplatform   Tony Prisk
• [GIT PULL] Convert arch-vt8500 to multiplatform   Arnd Bergmann
• [GIT PULL] DeviceTree fixes for 3.7   Rob Herring
• [GIT PULL] Disintegrate UAPI for arm   David Howells
• [GIT PULL] Disintegrate UAPI for arm   Russell King - ARM Linux
• [GIT PULL] Disintegrate UAPI for arm64   David Howells
• [GIT PULL] Disintegrate UAPI for arm64   Catalin Marinas
• [GIT PULL] Disintegrate UAPI for arm64 [ver #2]   David Howells
• [GIT PULL] Disintegrate UAPI for arm64 [ver #2]   Catalin Marinas
• [GIT PULL] Disintegrate UAPI for arm64 [ver #2]   David Howells
• [GIT PULL] Disintegrate UAPI for arm64 [ver #2]   Catalin Marinas
• [GIT PULL] Disintegrate UAPI for arm [ver #2]   David Howells
• [GIT PULL] first set of ux500 for ARM SoC for v3.8   Linus Walleij
• [GIT PULL] first set of ux500 for ARM SoC for v3.8   Linus Walleij
• [GIT PULL] first set of ux500 for ARM SoC for v3.8   Arnd Bergmann
• [GIT PULL] first set of ux500 for ARM SoC for v3.8   Linus Walleij
• [GIT PULL] first set of ux500 for ARM SoC for v3.8   Arnd Bergmann
• [GIT PULL] first set of ux500 for ARM SoC for v3.8   Linus Walleij
• [GIT PULL] i.MX fixes for -rc   Sascha Hauer
• [GIT PULL] i.MX fixes for -rc   Arnd Bergmann
• [GIT PULL] i.MX fixes for -rc   Arnd Bergmann
• [GIT PULL] i.MX fixes for -rc   Sascha Hauer
• [GIT PULL] imx multi-platform support   Shawn Guo
• [GIT PULL] imx multi-platform support   Olof Johansson
• [GIT PULL] OMAP-GPMC cleanup for common zImage   Afzal Mohammed
• [GIT PULL] OMAP-GPMC cleanup for common zImage   Mohammed, Afzal
• [GIT PULL] OMAP-GPMC cleanup for common zImage   Tony Lindgren
• [GIT PULL] OMAP-GPMC cleanup for common zImage   Afzal Mohammed
• [GIT PULL] OMAP-GPMC related cleanup for common zImage   Afzal Mohammed
• [GIT PULL] OMAP-GPMC related cleanup for common zImage   Artem Bityutskiy
• [GIT PULL] omap fixes for v3.7-rc2   Tony Lindgren
• [GIT PULL] omap fixes for v3.7-rc2   Arnd Bergmann
• [GIT PULL] omap fixes ready to go for v3.7-rc1   Tony Lindgren
• [GIT PULL] omap fixes ready to go for v3.7-rc1   Olof Johansson
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Tony Lindgren
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Arnd Bergmann
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Tony Lindgren
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Arnd Bergmann
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Tony Lindgren
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Tony Lindgren
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Arnd Bergmann
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Russell King - ARM Linux
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Tony Lindgren
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Tony Lindgren
• [GIT PULL] omap plat header removal for v3.8 merge window, part1   Tony Lindgren
• [GIT PULL] remoteproc for 3.7   Ohad Ben-Cohen
• [GIT PULL] Renesas ARM-based SoC boards for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Nicolas Pitre
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fixes for v3.7   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fixes for v3.7   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fixes for v3.7   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC fixes for v3.7 #2   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fixes for v3.7 #2   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fixes for v3.7 #2   Arnd Bergmann
• [GIT PULL] Samsung fixes-2 for v3.7   Kukjin Kim
• [GIT PULL] Samsung fixes-2 for v3.7   Arnd Bergmann
• [git pull] signals pile 3   Daniel Mack
• [git pull] signals pile 3   Russell King - ARM Linux
• [git pull] signals pile 3   Russell King - ARM Linux
• [git pull] signals pile 3   Daniel Mack
• [git pull] signals pile 3   Russell King - ARM Linux
• [git pull] signals pile 3   Uwe Kleine-König
• [git pull] signals pile 3   Russell King - ARM Linux
• [GIT PULL] SPEAr pinctrl updates for v-3.5   viresh kumar
• [GIT PULL] Urgent DMA-mapping fix for v3.7-rc3   Marek Szyprowski
• [GIT PULL] ux500 fixes due for v3.7 RCs   Lee Jones
• [GIT PULL] ux500 fixes due for v3.7 RCs   Arnd Bergmann
• [GIT PULL] ux500 fixes due for v3.7 RCs   Linus Walleij
• [GIT PULL] ux500 fixes due for v3.7 RCs   Lee Jones
• [GIT PULL] ux500 fixes due for v3.7 RCs   Arnd Bergmann
• [GIT PULL] Versatile Express clk   Mike Turquette
• [GIT PULL] Versatile Express clk   Pawel Moll
• [GIT PULL] Versatile Express updates for v3.8   Pawel Moll
• [GIT PULL] Versatile Express updates for v3.8   Olof Johansson
• [GIT PULL] Versatile Express updates for v3.8   Pawel Moll
• [GIT PULL] vexpress: drivers for v3.8   Pawel Moll
• [GIT PULL] vexpress: drivers for v3.8   Arnd Bergmann
• [GIT PULL] vexpress: fixes for v3.8   Pawel Moll
• [GIT PULL] vexpress: fixes for v3.8   Arnd Bergmann
• [GIT PULL] vexpress: soc changes for v3.8   Pawel Moll
• [GIT PULL] vexpress: soc changes for v3.8   Arnd Bergmann
• [GIT PULL] vexpress: soc changes for v3.8   Pawel Moll
• [GIT PULL] vexpress: soc changes for v3.8   Arnd Bergmann
• [GIT PULL] vexpress: soc changes for v3.8   Pawel Moll
• [GIT PULL] vexpress: soc changes for v3.8   Arnd Bergmann
• [GIT PULL] vexpress: soc changes for v3.8   Pawel Moll
• [GIT PULL] vexpress: soc changes for v3.8   Arnd Bergmann
• [GIT PULL] vexpress: soc changes for v3.8   Pawel Moll
• [GIT PULL] vexpress: soc changes for v3.8   Arnd Bergmann
• [GIT PULL FOR v3.7] Davinci VPBE feature enhancement and fixes   Prabhakar Lad
• [GIT PULL V2] ARM: Kirkwood: fixes for v3.7   Jason Cooper
• [GIT PULL v2] ARM: OMAP: more hwmod/PRCM fixes for 3.7-rc   Paul Walmsley
• [GIT PULL v2] Renesas ARM-based SoC boards for v3.8   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [GIT PULL v3] ARM architecture fixes for 3.7   Arnd Bergmann
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8   Simon Horman
• [GIT PULL v3] Renesas ARM-based SoC for v3.8   Simon Horman
• [kvmarm] [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Marc Zyngier
• [kvmarm] [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Avi Kivity
• [kvmarm] [PATCH v2 06/14] KVM: ARM: Memory virtualization setup   Marc Zyngier
• [kvmarm] [PATCH v2 06/14] KVM: ARM: Memory virtualization setup   Min-gyu Kim
• [kvmarm] [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Peter Maydell
• [kvmarm] [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Will Deacon
• [kvmarm] [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Peter Maydell
• [kvmarm] [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Will Deacon
• [kvmarm] [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Christoffer Dall
• [kvmarm] [PATCH v2 12/14] KVM: ARM: VFP userspace interface   Peter Maydell
• [kvmarm] [PATCH v2 12/14] KVM: ARM: VFP userspace interface   Christoffer Dall
• [kvmarm] [PATCH v2 12/14] KVM: ARM: VFP userspace interface   Rusty Russell
• [Linaro-mm-sig] [PATCHv9 00/25] Integration of videobuf2 with DMABUF   Kyungmin Park
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Hiroshi Doyu
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Daniel Vetter
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Catalin Marinas
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Inki Dae
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Hiroshi Doyu
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Inki Dae
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Hiroshi Doyu
• [Linaro-mm-sig] [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Inki Dae
• [PATCH-V2 0/4] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver   Vaibhav Hiremath
• [PATCH-V2 0/4] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver   Richard Cochran
• [PATCH 0/2] Add DMA and device tree support to the flash controller FLCTL   Bastian Hecht
• [PATCH 0/2] Add hardware I/O coherency support for Armada 370/XP   Gregory CLEMENT
• [PATCH 0/2] Adding SATA support for Armada 370/XP   Gregory CLEMENT
• [PATCH 0/2] ARM: bcm2835: Fixes   Domenico Andreoli
• [PATCH 0/2] ARM: Exynos4: Migrate to common clock framework.   chander.kashyap at linaro.org
• [PATCH 0/2] ARM: Exynos4: Migrate to common clock framework.   Tomasz Figa
• [PATCH 0/2] ARM: Exynos4: Migrate to common clock framework.   Thomas Abraham
• [PATCH 0/2] ARM: OMAP2+: Add device-tree support for 32kHz counter   Jon Hunter
• [PATCH 0/2] ARM: OMAP: hwmod/omapd_device: Fix for resource handling in DT boot   Peter Ujfalusi
• [PATCH 0/2] ARM: OMAP: hwmod/omapd_device: Fix for resource handling in DT boot   Paul Walmsley
• [PATCH 0/2] ARM: OMAP: hwmod/omapd_device: Fix for resource handling in DT boot   Péter Ujfalusi
• [PATCH 0/2] ARM: OMAP: mailbox out of plat code   Omar Ramirez Luna
• [PATCH 0/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   jean.pihet at newoldbits.com
• [PATCH 0/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   jean.pihet at newoldbits.com
• [PATCH 0/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Kevin Hilman
• [PATCH 0/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH 0/2] ARM: sort configuration files   Russell King - ARM Linux
• [PATCH 0/2] ARM: sort configuration files   Russell King - ARM Linux
• [PATCH 0/2] ARM: sort configuration files   Russell King - ARM Linux
• [PATCH 0/2] ARM: tegra: add speedo identification for T20/T30   Danny Huang
• [PATCH 0/2] ARM: tegra: bring back tegra_timer clock   Sivaram Nair
• [PATCH 0/2] ARM: tegra: bring back tegra_timer clock   Stephen Warren
• [PATCH 0/2] clk: ux500: Add some more clk lookups for u8500   Ulf Hansson
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Ulf Hansson
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Linus Walleij
• [PATCH 0/2] Enable ehci and ohci devices for exynos5250   Vivek Gautam
• [PATCH 0/2] few omap mux fixes for v3.7-rc2   Tony Lindgren
• [PATCH 0/2] i2c: omap: cleanups   Shubhrajyoti D
• [PATCH 0/2] mmc: sdhci: Defer probe if regulators are not registered   Pavan Kunapuli
• [PATCH 0/2] omap plat/cpu.h removal for v3.8 merge window   Tony Lindgren
• [PATCH 0/2] omap plat/usb.h removal for v3.8 merge window   Tony Lindgren
• [PATCH 0/2] qt1070 & gpio_keys add pinctrl consumer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] ARM: dts: EMIF and LPDDR2 device tree data for OMAP5 boards   Lokesh Vutla
• [PATCH 0/3] ARM: dts: EMIF and LPDDR2 device tree data for OMAP5 boards   Benoit Cousson
• [PATCH 0/3] ARM: OMAP: fix build, sparse problems in cleanup-headers   Paul Walmsley
• [PATCH 0/3] Minor fixes for generic clock framework   Stephen Boyd
• [PATCH 0/3] Minor fixes for generic clock framework   Stephen Boyd
• [PATCH 0/3] Minor fixes for generic clock framework   Mike Turquette
• [PATCH 0/3] new ARM-soc warning fixes   Arnd Bergmann
• [PATCH 0/3] new ARM-soc warning fixes   Olof Johansson
• [PATCH 0/3] new ARM-soc warning fixes   Arnd Bergmann
• [PATCH 0/3] new ARM-soc warning fixes   Olof Johansson
• [PATCH 0/3] ocp2scp: add non-dt support   Kishon Vijay Abraham I
• [PATCH 0/3] serial: mxs-auart: add DMA support for auart in mx28   Huang Shijie
• [PATCH 0/3] Use generic helper scu_power_mode()   Bastian Hecht
• [PATCH 0/3] Use generic helper scu_power_mode()   Simon Horman
• [PATCH 0/4] Add DT support for Network Space v2 and parents   Simon Guinot
• [PATCH 0/4] Add DT support for Network Space v2 and parents   Jason Cooper
• [PATCH 0/4] Add DT support for Network Space v2 and parents   Simon Guinot
• [PATCH 0/4] Add DT support for Network Space v2 and parents   Jason Cooper
• [PATCH 0/4] arm-soc: vt8500: Cleanup patches for 3.7   Tony Prisk
• [PATCH 0/4] arm-soc: vt8500: Cleanup patches for 3.7   Arnd Bergmann
• [PATCH 0/4] arm-soc: vt8500: Cleanup patches for 3.7   Olof Johansson
• [PATCH 0/4] arm-soc: vt8500: Cleanup patches for 3.7   Tony Prisk
• [PATCH 0/4] arm-soc: vt8500: Cleanup patches for 3.7   Olof Johansson
• [PATCH 0/4] ARM/dts: Update OMAP5 with address space and interrupts   Sebastien Guiriec
• [PATCH 0/4] ARM/dts: Update OMAP5 with address space and interrupts   Benoit Cousson
• [PATCH 0/4] ARM/dts: Update OMAP5 with address space and interrupts   Sebastien Guiriec
• [PATCH 0/4] arm64: Random fixes for 3.7   Catalin Marinas
• [PATCH 0/4] ARM: EXYNOS: Kconfig cleanup   Tomasz Figa
• [PATCH 0/4] ARM: OMAP: more hwmod/PRCM fixes for 3.7-rc   Paul Walmsley
• [PATCH 0/4] cpufreq: db8500: Use platform data to provide cpufreq table   Jonas Aaberg
• [PATCH 0/4] cpufreq: db8500: Use platform data to provide cpufreq table   Linus Walleij
• [PATCH 0/4] cpufreq: db8500: Use platform data to provide cpufreq table   Ulf Hansson
• [PATCH 0/4] cpufreq: db8500: Use platform data to provide cpufreq table   Rafael J. Wysocki
• [PATCH 0/4] cpufreq: OMAP: fixes for v3.7-rc2   Kevin Hilman
• [PATCH 0/4] cpufreq: OMAP: fixes for v3.7-rc2   Rafael J. Wysocki
• [PATCH 0/4] cpufreq: OMAP: fixes for v3.7-rc2   Kevin Hilman
• [PATCH 0/4] DMA: PL330 fixes   Bartlomiej Zolnierkiewicz
• [PATCH 0/4] DMA: PL330 fixes   Tomasz Figa
• [PATCH 0/4] Implement device tree support for ab8500 BM Devices   Rajanikanth H.V
• [PATCH 0/4] Implement device tree support for ab8500 BM Devices   Rajanikanth H.V
• [PATCH 0/4] Implement device tree support for ab8500 BM Devices   Rajanikanth H.V
• [PATCH 0/4] mtd: nand: OMAP: Add support to use ELM as error correction module   Philip, Avinash
• [PATCH 0/4] OMAP-GPMC generic timing migration   Afzal Mohammed
• [PATCH 0/4] OMAP-GPMC generic timing migration   Tony Lindgren
• [PATCH 0/4] OMAP-GPMC generic timing migration   Afzal Mohammed
• [PATCH 0/4] OMAP-GPMC generic timing migration   Daniel Mack
• [PATCH 0/4] OMAP-GPMC generic timing migration   Mohammed, Afzal
• [PATCH 0/4] OMAP-GPMC generic timing migration   Tony Lindgren
• [PATCH 0/4] OMAP-GPMC generic timing migration   Mohammed, Afzal
• [PATCH 0/4] OMAP-GPMC generic timing migration   Tony Lindgren
• [PATCH 0/4] OMAP-GPMC generic timing migration   Afzal Mohammed
• [PATCH 0/4] OMAP-GPMC generic timing migration   Afzal Mohammed
• [PATCH 0/4] OMAP-GPMC generic timing migration   Daniel Mack
• [PATCH 0/4] OMAP-GPMC generic timing migration   Tony Lindgren
• [PATCH 0/4] OMAP-GPMC generic timing migration   Afzal Mohammed
• [PATCH 0/4] OMAP-GPMC generic timing migration   Afzal Mohammed
• [PATCH 0/4] OMAP-GPMC generic timing migration   Daniel Mack
• [PATCH 0/4] pinctrl: samsung: Add support for Exynos4x12 SoCs   Tomasz Figa
• [PATCH 0/4] pinctrl: samsung: Add support for Exynos4x12 SoCs   Thomas Abraham
• [PATCH 0/4] repost of the omap iommu header changes to remove plat includes   Tony Lindgren
• [PATCH 0/4] RFC: OMAP GPMC bindings   Daniel Mack
• [PATCH 0/4] Support the MX6 FEC as a PTP hardware clock   Frank Li
• [PATCH 0/5] Add DT support for AT91RM9200   Joachim Eastwood
• [PATCH 0/5] Add DT support for AT91RM9200   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] am335x fixes for 3.7-rc2   Richard Cochran
• [PATCH 0/5] ARM: OMAP2+: PRM/CM cleanup series for 3.8   Paul Walmsley
• [PATCH 0/5] ARM: OMAP2+: PRM/CM cleanup series for 3.8   Santosh Shilimkar
• [PATCH 0/5] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH 0/5] clk: ux500: Add clock lookups for u8500   Ulf Hansson
• [PATCH 0/5] clk: ux500: Add clock lookups for u8500   Linus Walleij
• [PATCH 0/5] clk: ux500: Add clock lookups for u8500   Lee Jones
• [PATCH 0/5] Enable mvebu pinctrl/gpio for Dove and Kirkwood   Andrew Lunn
• [PATCH 0/5] i2c-sh_mobile non-urgent changes   Shinya Kuribayashi
• [PATCH 0/5] make cadence ethernet drivers build on any architecture   Joachim Eastwood
• [PATCH 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH 0/5 v6] gpio: Add block GPIO   Roland Stigge
• [PATCH 0/6] Adding support for SATA in EXYNO5   vasanthananthan at gmail.com
• [PATCH 0/6] Adding support for SATA in EXYNO5   Vasanth Ananthan
• [PATCH 0/6] ARM: Add support for Broadcom BCM476x SoCs   Domenico Andreoli
• [PATCH 0/6] ARM: Add support for Broadcom BCM476x SoCs   Stephen Warren
• [PATCH 0/6] ARM: Add support for Broadcom BCM476x SoCs   Domenico Andreoli
• [PATCH 0/6] ARM: Add support for Broadcom BCM476x SoCs   Olof Johansson
• [PATCH 0/6] ARM: Add support for Broadcom BCM476x SoCs   Stephen Warren
• [PATCH 0/6] ARM: Add support for Broadcom BCM476x SoCs   Domenico Andreoli
• [PATCH 0/6] Initial Calxeda ECX-2000 support   Rob Herring
• [PATCH 0/6] Initial Calxeda ECX-2000 support   Arnd Bergmann
• [PATCH 0/6] Provide basic support for the u9540   Lee Jones
• [PATCH 0/6] Serial: AT91: Support rx and tx dma   Elen Song
• [PATCH 0/6] ux500 fixes bound for the -rcs   Lee Jones
• [PATCH 0/6] ux500 fixes bound for the -rcs   Linus Walleij
• [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver   Fabio Estevam
• [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver   Samuel Ortiz
• [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver   Uwe Kleine-König
• [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver   Fabio Estevam
• [PATCH 0/7] ARM: EXYNOS: add support for new EXYNOS5440 SoC   Kukjin Kim
• [PATCH 0/7] ARM: EXYNOS: add support for new EXYNOS5440 SoC   Kukjin Kim
• [PATCH 0/7] ARM: hw_breakpoint: fix reset sequence for debug arch v7.1   Will Deacon
• [PATCH 0/7] ARM: OMAP: second set of PRM/CM/CGRM cleanup patches for 3.8   Paul Walmsley
• [PATCH 0/7] ARM: OMAP: second set of PRM/CM/CGRM cleanup patches for 3.8   Benoit Cousson
• [PATCH 0/7] ARM: OMAP: second set of PRM/CM/CGRM cleanup patches for 3.8   Paul Walmsley
• [PATCH 0/7] ARM: OMAP: second set of PRM/CM/CGRM cleanup patches for 3.8   Benoit Cousson
• [PATCH 0/7] ARM: perf: updates for 3.8   Will Deacon
• [PATCH 0/7] ARM: tegra30: cpuidle: add LP2 support   Joseph Lo
• [PATCH 0/7] ARM: tegra30: cpuidle: add LP2 support   Stephen Warren
• [PATCH 0/7] ARM: tegra30: cpuidle: add LP2 support   Joseph Lo
• [PATCH 0/7] crypto: omap-sham updates   Mark A. Greer
• [PATCH 0/7] crypto: omap-sham updates   Paul Walmsley
• [PATCH 0/7] crypto: omap-sham updates   Mark A. Greer
• [PATCH 0/7] Move GIC and VIC to drivers/irqchip   Rob Herring
• [PATCH 0/7] Next instalment of Device Tree work for ST-Ericsson   Lee Jones
• [PATCH 0/8] at91: 3.7 fixes patch series   Nicolas Ferre
• [PATCH 0/8] at91: 3.7 fixes patch series   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Ulf Hansson
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Lee Jones
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Linus Walleij
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Lee Jones
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Ulf Hansson
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Linus Walleij
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Mike Turquette
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Linus Walleij
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Samuel Ortiz
• [PATCH 0/8] Convert Ux500 to SPARSE_IRQ   Linus Walleij
• [PATCH 0/8] Convert Ux500 to SPARSE_IRQ   Arnd Bergmann
• [PATCH 0/8] Convert Ux500 to SPARSE_IRQ   Linus Walleij
• [PATCH 0/8] Cragganmore updates   Mark Brown
• [PATCH 0/8] Cragganmore updates   Kukjin Kim
• [PATCH 0/8] I2C patches for v3.8 merge window   Felipe Balbi
• [PATCH 0/8] I2C patches for v3.8 merge window   Felipe Balbi
• [PATCH 0/8] I2C patches for v3.8 merge window   Shubhrajyoti Datta
• [PATCH 0/8] I2C patches for v3.8 merge window   Felipe Balbi
• [PATCH 0/8] I2C patches for v3.8 merge window   Shubhrajyoti
• [PATCH 0/8] zynq COMMON_CLK support   Josh Cartwright
• [PATCH 0/9] ARM: dts/OMAP: Pinmux audio configuration for OMAP4+   Peter Ujfalusi
• [PATCH 0/9] ARM: dts/OMAP: Pinmux audio configuration for OMAP4+   Tony Lindgren
• [PATCH 0/9] ARM: dts/OMAP: Pinmux audio configuration for OMAP4+   Péter Ujfalusi
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Andrew Lunn
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Josh Coombs
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Andrew Lunn
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Michael Walle
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Thomas Petazzoni
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Andrew Lunn
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Michael Walle
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Thomas Petazzoni
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Andrew Lunn
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Thomas Petazzoni
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Michael Walle
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Thomas Petazzoni
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Michael Walle
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Jamie Lentin
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Michael Walle
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Thomas Petazzoni
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Michael Walle
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Andrew Lunn
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Andrew Lunn
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Michael Walle
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Simon Baatz
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Andrew Lunn
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Jamie Lentin
• [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl   Josh Coombs
• [PATCH 0/9] Pinctrl: SPEAr: Fixes for 3.7-rc3   Viresh Kumar
• [PATCH 00/10] Platform data clean-up and UIB device enablement   Lee Jones
• [PATCH 00/10] Platform data clean-up and UIB device enablement   Arnd Bergmann
• [PATCH 00/10] Platform data clean-up and UIB device enablement   Lee Jones
• [PATCH 00/10] Platform data clean-up and UIB device enablement   Arnd Bergmann
• [PATCH 00/10] Support imx6q WAIT mode with coupled cpuidle   Shawn Guo
• [PATCH 00/11] Fix relative includes for omaps introduced by recent clean-up   Tony Lindgren
• [PATCH 00/11] Minimum set of omap serial patches to fix merge window breakage   Russell King - ARM Linux
• [PATCH 00/11] Minimum set of omap serial patches to fix merge window breakage   Russell King - ARM Linux
• [PATCH 00/11] Minimum set of omap serial patches to fix merge window breakage   Tony Lindgren
• [PATCH 00/11] mtd/nand: fsmc driver updates   Vipin Kumar
• [PATCH 00/11] mtd/nand: fsmc driver updates   Artem Bityutskiy
• [PATCH 00/11] mtd/nand: fsmc driver updates   Vipin Kumar
• [PATCH 00/13] ARM: OMAP: remove prcm.[ch]   Paul Walmsley
• [PATCH 00/13] ARM: OMAP: remove prcm.[ch]   Vaibhav Hiremath
• [PATCH 00/13] ARM: OMAP: remove prcm.[ch]   Paul Walmsley
• [PATCH 00/13] ARM: OMAP: remove prcm.[ch]   Hiremath, Vaibhav
• [PATCH 00/15] OMAP-GPMC related cleanup for common zImage   Afzal Mohammed
• [PATCH 00/15] OMAP-GPMC related cleanup for common zImage   Mohammed, Afzal
• [PATCH 00/16] ARM: mostly harmless gcc warnings   Arnd Bergmann
• [PATCH 00/16] More omap plat header cleanup for v3.8 merge window   Tony Lindgren
• [PATCH 00/16] More omap plat header cleanup for v3.8 merge window   Santosh Shilimkar
• [PATCH 00/16] More omap plat header cleanup for v3.8 merge window   Santosh Shilimkar
• [PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements   Tomasz Figa
• [PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements   Linus Walleij
• [PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements   Tomasz Figa
• [PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements   Tomasz Figa
• [PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements   Linus Walleij
• [PATCH 00/16] treewide: Convert dev_printk(KERN_<LEVEL> to dev_<level>(   Joe Perches
• [PATCH 00/16] treewide: Convert dev_printk(KERN_<LEVEL> to dev_<level>(   Sergei Shtylyov
• [PATCH 00/16] treewide: Convert dev_printk(KERN_<LEVEL> to dev_<level>(   Joe Perches
• [PATCH 01/10] ARM: imx6q: print silicon version on boot   Shawn Guo
• [PATCH 01/10] ARM: mach-rpc: Don't register FIQs with genirq   Anton Vorontsov
• [PATCH 01/10] ARM: shmobile: r8a7740: Enable PMU   Simon Horman
• [PATCH 01/10] ARM: ux500: Move all Device Tree booting into cpu-db8500   Lee Jones
• [PATCH 01/10] ARM: ux500: Move all Device Tree booting into cpu-db8500   Linus Walleij
• [PATCH 01/10] mfd: Prevent STMPE from abusing mfd_add_devices' irq_base parameter   Lee Jones
• [PATCH 01/10] pinctrl: use postcore_initcall   Haojian Zhuang
• [PATCH 01/10] pinctrl: use postcore_initcall   Linus Walleij
• [PATCH 01/10] pinctrl: use postcore_initcall   Stephen Warren
• [PATCH 01/10] pinctrl: use postcore_initcall   Tony Lindgren
• [PATCH 01/10] pinctrl: use postcore_initcall   Haojian Zhuang
• [PATCH 01/10] pinctrl: use postcore_initcall   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/10] pinctrl: use postcore_initcall   Tony Lindgren
• [PATCH 01/10] pinctrl: use postcore_initcall   Haojian Zhuang
• [PATCH 01/10] pinctrl: use postcore_initcall   Tony Lindgren
• [PATCH 01/11] ARM: OMAP: Split sram.h to local headers and minimal shared header   Tony Lindgren
• [PATCH 01/11] ARM: shmobile: Remove SH7367 support   Simon Horman
• [PATCH 01/11] fsmc/nand:FIX: Change the type for regs to void __iomem *   Vipin Kumar
• [PATCH 01/11] fsmc/nand:FIX: Change the type for regs to void __iomem *   viresh kumar
• [PATCH 01/11] fsmc/nand:FIX: Change the type for regs to void __iomem *   Linus Walleij
• [PATCH 01/11] fsmc/nand:FIX: Change the type for regs to void __iomem *   Artem Bityutskiy
• [PATCH 01/11] SERIAL: core: use local variable uport in uart_set_termios()   Russell King
• [PATCH 01/12] ARM: shmobile: r8a7740: Enable PMU   Simon Horman
• [PATCH 01/12] ARM: shmobile: r8a7740: Enable PMU   Sergei Shtylyov
• [PATCH 01/12] ARM: shmobile: r8a7740: Enable PMU   Simon Horman
• [PATCH 01/13] ARM: OMAP2+: common: remove mach-omap2/common.c and map_common_io code   Paul Walmsley
• [PATCH 01/13] calk: davinci - add Main PLL clock driver   Karicheri, Muralidharan
• [PATCH 01/13] calk: davinci - add Main PLL clock driver   Sekhar Nori
• [PATCH 01/13] calk: davinci - add Main PLL clock driver   Karicheri, Muralidharan
• [PATCH 01/13] clk: davinci - add Main PLL clock driver   Sekhar Nori
• [PATCH 01/13] clk: davinci - add Main PLL clock driver   Sekhar Nori
• [PATCH 01/13] clk: davinci - add Main PLL clock driver   Karicheri, Muralidharan
• [PATCH 01/15] ARM: OMAP2+: gpmc: annotate exit sections properly   Afzal Mohammed
• [PATCH 01/15] pinctrl: samsung: Detect and handle unsupported configuration types   Tomasz Figa
• [PATCH 01/15] pinctrl: samsung: Detect and handle unsupported configuration types   Linus Walleij
• [PATCH 01/15] pinctrl: samsung: Detect and handle unsupported configuration types   Kyungmin Park
• [PATCH 01/15] pinctrl: samsung: Detect and handle unsupported configuration types   Linus Walleij
• [PATCH 01/16] ARM: dts: exynos4210: Replace legacy GPIO bank nodes with pinctrl bank nodes   Tomasz Figa
• [PATCH 01/16] ARM: dts: exynos4210: Replace legacy GPIO bank nodes with pinctrl bank nodes   Linus Walleij
• [PATCH 01/16] ARM: dts: exynos4210: Replace legacy GPIO bank nodes with pinctrl bank nodes   Tomasz Figa
• [PATCH 01/16] ARM: dts: exynos4210: Replace legacy GPIO bank nodes with pinctrl bank nodes   Stephen Warren
• [PATCH 01/16] ARM: dts: exynos4210: Replace legacy GPIO bank nodes with pinctrl bank nodes   Tony Lindgren
• [PATCH 01/16] ARM: dts: exynos4210: Replace legacy GPIO bank nodes with pinctrl bank nodes   Tomasz Figa
• [PATCH 01/16] ARM: dts: exynos4210: Replace legacy GPIO bank nodes with pinctrl bank nodes   Tomasz Figa
• [PATCH 01/16] ARM: OMAP2+: Make board-zoom.h local   Tony Lindgren
• [PATCH 01/16] ARM: warnings in arch/arm/include/asm/uaccess.h   Arnd Bergmann
• [PATCH 01/16] ARM: warnings in arch/arm/include/asm/uaccess.h   Greg Ungerer
• [PATCH 01/16] ARM: warnings in arch/arm/include/asm/uaccess.h   Arnd Bergmann
• [PATCH 02/10] ARM: imx: allow timer counter to roll over   Shawn Guo
• [PATCH 02/10] ARM: mmp: select pinctrl driver   Haojian Zhuang
• [PATCH 02/10] ARM: plat-s3c24xx: Don't use FIQ_START   Anton Vorontsov
• [PATCH 02/10] ARM: shmobile: kzm9g: enable magnetometer ak8975.   Simon Horman
• [PATCH 02/10] ARM: ux500: Strip out duplicate touch screen platform information   Lee Jones
• [PATCH 02/10] ARM: ux500: Strip out duplicate touch screen platform information   Linus Walleij
• [PATCH 02/10] mfd: Provide the STMPE driver with its own IRQ domain   Lee Jones
• [PATCH 02/11] ARM: OMAP: Introduce common omap_map_sram() and omap_sram_reset()   Tony Lindgren
• [PATCH 02/11] ARM: shmobile: Remove SH7377 support   Simon Horman
• [PATCH 02/11] fsmc/nand: Rearrange the fsmc_nand_data structure and update comments   Vipin Kumar
• [PATCH 02/11] fsmc/nand: Rearrange the fsmc_nand_data structure and update comments   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] fsmc/nand: Rearrange the fsmc_nand_data structure and update comments   viresh kumar
• [PATCH 02/11] fsmc/nand: Rearrange the fsmc_nand_data structure and update comments   Vipin Kumar
• [PATCH 02/11] SERIAL: core: add hardware assisted s/w flow control support   Russell King
• [PATCH 02/12] ARM: shmobile: kzm9g: enable magnetometer ak8975.   Simon Horman
• [PATCH 02/13] ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)   Paul Walmsley
• [PATCH 02/13] clk: davinci - add PSC clock driver   Sekhar Nori
• [PATCH 02/13] clk: davinci - add PSC clock driver   Sekhar Nori
• [PATCH 02/13] clk: davinci - add PSC clock driver   Karicheri, Muralidharan
• [PATCH 02/13] clk: davinci - add PSC clock driver   Karicheri, Muralidharan
• [PATCH 02/15] mtd: onenand: omap: cleanup gpmc dependency   Afzal Mohammed
• [PATCH 02/15] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank   Tomasz Figa
• [PATCH 02/16] ARM: binfmt_flat: unused variable 'persistent'   Arnd Bergmann
• [PATCH 02/16] ARM: binfmt_flat: unused variable 'persistent'   Greg Ungerer
• [PATCH 02/16] ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2   Tony Lindgren
• [PATCH 02/16] ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2   Shubhrajyoti
• [PATCH 02/16] pinctrl: exynos: Parse wakeup-eint parameters from DT   Tomasz Figa
• [PATCH 02/16] pinctrl: exynos: Parse wakeup-eint parameters from DT   Linus Walleij
• [PATCH 02/16] pinctrl: exynos: Parse wakeup-eint parameters from DT   Tomasz Figa
• [PATCH 03/10] [media] mx1_camera: Don't use {en,dis}able_fiq() calls   Anton Vorontsov
• [PATCH 03/10] [media] mx1_camera: Don't use {en,dis}able_fiq() calls   Sascha Hauer
• [PATCH 03/10] ARM: imx6q: select ARM and PL310 errata   Shawn Guo
• [PATCH 03/10] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345   Simon Horman
• [PATCH 03/10] Input: bu21013_ts - Request a regulator that actually exists   Lee Jones
• [PATCH 03/10] Input: bu21013_ts - Request a regulator that actually exists   Linus Walleij
• [PATCH 03/10] mfd: Correct copy and paste mistake in stmpe   Lee Jones
• [PATCH 03/10] tty: pxa: configure pin   Haojian Zhuang
• [PATCH 03/10] tty: pxa: configure pin   Linus Walleij
• [PATCH 03/10] tty: pxa: configure pin   Stephen Warren
• [PATCH 03/10] tty: pxa: configure pin   Linus Walleij
• [PATCH 03/10] tty: pxa: configure pin   Stephen Warren
• [PATCH 03/10] tty: pxa: configure pin   Linus Walleij
• [PATCH 03/10] tty: pxa: configure pin   Mark Brown
• [PATCH 03/10] tty: pxa: configure pin   Linus Walleij
• [PATCH 03/10] tty: pxa: configure pin   Mark Brown
• [PATCH 03/10] tty: pxa: configure pin   Linus Walleij
• [PATCH 03/11] ARM: OMAP: Move omap1 specific code to local sram.c   Tony Lindgren
• [PATCH 03/11] ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode   Simon Horman
• [PATCH 03/11] fsmc/nand: Support multiple banks connected to controller   Vipin Kumar
• [PATCH 03/11] fsmc/nand: Support multiple banks connected to controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] fsmc/nand: Support multiple banks connected to controller   Vipin Kumar
• [PATCH 03/11] fsmc/nand: Support multiple banks connected to controller   Artem Bityutskiy
• [PATCH 03/11] SERIAL: core: add hardware assisted h/w flow control support   Russell King
• [PATCH 03/12] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345   Simon Horman
• [PATCH 03/12] mmc: dw_mmc: fix building exynos driver as a module   Will Newton
• [PATCH 03/12] mmc: dw_mmc: fix building exynos driver as a module   Seungwon Jeon
• [PATCH 03/13] ARM: OMAP2xxx: clock: remove global 'dclk' variable   Paul Walmsley
• [PATCH 03/15] mtd: nand: omap: free region as per resource size   Afzal Mohammed
• [PATCH 03/15] pinctrl: samsung: Assing pin numbers dynamically   Tomasz Figa
• [PATCH 03/16] ARM: OMAP: Make plat/common.h local to mach-omap1 and mach-omap2   Tony Lindgren
• [PATCH 03/16] pinctrl: samsung: Detect and handle unsupported configuration types   Tomasz Figa
• [PATCH 03/16] pinctrl: samsung: Detect and handle unsupported configuration types   Linus Walleij
• [PATCH 03/16] pinctrl: samsung: Detect and handle unsupported configuration types   Tomasz Figa
• [PATCH 03/16] SCSI: ARM: ncr5380/oak uses no interrupts   Arnd Bergmann
• [PATCH 04/10] ARM: imx: initialize cpu power up counters   Shawn Guo
• [PATCH 04/10] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2   Simon Horman
• [PATCH 04/10] ASoC: imx: Don't use {en,dis}able_fiq() calls   Anton Vorontsov
• [PATCH 04/10] ASoC: imx: Don't use {en,dis}able_fiq() calls   Mark Brown
• [PATCH 04/10] ASoC: imx: Don't use {en,dis}able_fiq() calls   Sascha Hauer
• [PATCH 04/10] i2c: pxa: configure pins   Haojian Zhuang
• [PATCH 04/10] i2c: pxa: configure pins   Linus Walleij
• [PATCH 04/10] Input: bu21013_ts - Move GPIO init and exit functions into the driver   Lee Jones
• [PATCH 04/10] Input: bu21013_ts - Move GPIO init and exit functions into the driver   Linus Walleij
• [PATCH 04/10] of/i2c: Add support for I2C_CLIENT_WAKE when booting with Device Tree   Lee Jones
• [PATCH 04/10] of/i2c: Add support for I2C_CLIENT_WAKE when booting with Device Tree   Rob Herring
• [PATCH 04/10] of/i2c: Add support for I2C_CLIENT_WAKE when booting with Device Tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/10] of/i2c: Add support for I2C_CLIENT_WAKE when booting with Device Tree   Lee Jones
• [PATCH 04/11] ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2   Tony Lindgren
• [PATCH 04/11] ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2   Tony Lindgren
• [PATCH 04/11] ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode   Simon Horman
• [PATCH 04/11] fsmc/nand: Accept nand timing parameters via DT   Vipin Kumar
• [PATCH 04/11] fsmc/nand: Accept nand timing parameters via DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] fsmc/nand: Accept nand timing parameters via DT   viresh kumar
• [PATCH 04/11] fsmc/nand: Accept nand timing parameters via DT   Vipin Kumar
• [PATCH 04/11] SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control   Russell King
• [PATCH 04/12] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2   Simon Horman
• [PATCH 04/12] video: exynos: warnings in exynos_dp_core.c   Jingoo Han
• [PATCH 04/12] video: exynos: warnings in exynos_dp_core.c   Arnd Bergmann
• [PATCH 04/13] ARM: OMAP2xxx: clock: move virt_prcm_set code into clkt2xxx_virt_prcm_set.c   Paul Walmsley
• [PATCH 04/15] mtd: nand: omap: read nand using register address   Afzal Mohammed
• [PATCH 04/15] pinctrl: samsung: Remove static pin enumerations   Tomasz Figa
• [PATCH 04/16] ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap   Tony Lindgren
• [PATCH 04/16] pinctrl: samsung: Parse pin banks from DT   Tomasz Figa
• [PATCH 04/16] pinctrl: samsung: Parse pin banks from DT   Linus Walleij
• [PATCH 04/16] pinctrl: samsung: Parse pin banks from DT   Tomasz Figa
• [PATCH 04/16] pinctrl: samsung: Parse pin banks from DT   Linus Walleij
• [PATCH 04/16] SCSI: ARM: make fas216_dumpinfo function conditional   Arnd Bergmann
• [PATCH 05/10] ARM: FIQ: Remove enable_fiq() and disable_fiq() calls   Anton Vorontsov
• [PATCH 05/10] ARM: imx: mask gpc interrupts initially   Shawn Guo
• [PATCH 05/10] ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372   Simon Horman
• [PATCH 05/10] i2c: pxa: use devm_kzalloc   Haojian Zhuang
• [PATCH 05/10] i2c: pxa: use devm_kzalloc   Stephen Warren
• [PATCH 05/10] i2c: pxa: use devm_kzalloc   Haojian Zhuang
• [PATCH 05/10] Input: bu21013_ts - Add support for Device Tree booting   Lee Jones
• [PATCH 05/10] Input: bu21013_ts - Add support for Device Tree booting   Linus Walleij
• [PATCH 05/10] mfd: Enable the STMPE MFD for Device Tree   Lee Jones
• [PATCH 05/11] ARM: OMAP: Make plat-omap/i2c.c port checks local   Tony Lindgren
• [PATCH 05/11] ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode   Simon Horman
• [PATCH 05/11] fsmc: Implement ready/busy through gpio pin   Vipin Kumar
• [PATCH 05/11] fsmc: Implement ready/busy through gpio pin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] fsmc: Implement ready/busy through gpio pin   viresh kumar
• [PATCH 05/11] SERIAL: omap: allow hardware assisted rts/cts modes to be disabled   Russell King
• [PATCH 05/12] ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372   Simon Horman
• [PATCH 05/13] ARM: OMAP2+: PRCM: create SoC-specific chip restart functions   Paul Walmsley
• [PATCH 05/13] ARM: OMAP2+: PRCM: create SoC-specific chip restart functions   Vaibhav Hiremath
• [PATCH 05/13] ARM: OMAP2+: PRCM: create SoC-specific chip restart functions   Paul Walmsley
• [PATCH 05/15] ARM: OMAP2+: onenand: connected soc info in pdata   Afzal Mohammed
• [PATCH 05/15] pinctrl: samsung: Distinguish between pin group and bank nodes   Tomasz Figa
• [PATCH 05/16] ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1   Tony Lindgren
• [PATCH 05/16] pinctrl: exynos: Remove static SoC-specific data   Tomasz Figa
• [PATCH 05/16] vfs: bogus warnings in fs/namei.c   Arnd Bergmann
• [PATCH 05/16] vfs: bogus warnings in fs/namei.c   Jan Kara
• [PATCH 05/16] vfs: bogus warnings in fs/namei.c   Arnd Bergmann
• [PATCH 05/16] vfs: bogus warnings in fs/namei.c   Arnd Bergmann
• [PATCH 05/16] vfs: bogus warnings in fs/namei.c   Jan Kara
• [PATCH 05/16] vfs: bogus warnings in fs/namei.c   Al Viro
• [PATCH 06/10] ARM: FIQ: Remove FIQ_START   Anton Vorontsov
• [PATCH 06/10] ARM: imx6q: prepare imx6q_set_lpm for cpudile support   Shawn Guo
• [PATCH 06/10] ARM: shmobile: armadillo800eva: enable restart   Simon Horman
• [PATCH 06/10] Documentation: Describe bindings for STMPE Multi-Functional Device driver   Lee Jones
• [PATCH 06/10] Documentation: Detail permitted DT properties for the BU21013 Touch Screen   Lee Jones
• [PATCH 06/10] Documentation: Detail permitted DT properties for the BU21013 Touch Screen   Linus Walleij
• [PATCH 06/10] pinctrl: single: support gpio request and free   Haojian Zhuang
• [PATCH 06/10] pinctrl: single: support gpio request and free   Tony Lindgren
• [PATCH 06/11] ARM: OMAP: Fix relative includes for shared i2c.h file   Tony Lindgren
• [PATCH 06/11] ARM: shmobile: r8a7740: fixup DT machine desc name typo   Simon Horman
• [PATCH 06/11] fsmc/nand: Modify the wait to uninterruptible   Vipin Kumar
• [PATCH 06/11] fsmc/nand: Modify the wait to uninterruptible   Linus Walleij
• [PATCH 06/11] fsmc/nand: Modify the wait to uninterruptible   Artem Bityutskiy
• [PATCH 06/11] SERIAL: omap: allow hardware assisted IXANY mode to be disabled   Russell King
• [PATCH 06/12] ARM: shmobile: armadillo800eva: enable restart   Simon Horman
• [PATCH 06/13] ARM: OMAP2+: board files: use SoC-specific system restart functions   Paul Walmsley
• [PATCH 06/15] ARM: dts: exynos4210-pinctrl: Add nodes for pin banks   Tomasz Figa
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Min-gyu Kim
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Christoffer Dall
• [PATCH 06/15] KVM: ARM: Initial skeleton to compile KVM support   Rusty Russell
• [PATCH 06/15] mtd: onenand: omap: use pdata info instead of cpu_is   Afzal Mohammed
• [PATCH 06/16] ARM: OMAP: Move plat/led.h to include/linux/platform_data   Tony Lindgren
• [PATCH 06/16] dma: Convert dev_printk(KERN_<LEVEL> to dev_<level>(   Joe Perches
• [PATCH 06/16] dma: Convert dev_printk(KERN_<LEVEL> to dev_<level>(   Vinod Koul
• [PATCH 06/16] mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN   Arnd Bergmann
• [PATCH 06/16] mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN   Christoph Lameter
• [PATCH 06/16] mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN   Pekka Enberg
• [PATCH 06/16] pinctrl: samsung: Parse bank-specific eint offset from DT   Tomasz Figa
• [PATCH 07/10] ARM: FIQ: Should include asm/mach/irq.h   Anton Vorontsov
• [PATCH 07/10] ARM: imx6q: get v7_cpu_resume ready for cpuidle   Shawn Guo
• [PATCH 07/10] ARM: shmobile: r8a7779: add HSPI clock support   Simon Horman
• [PATCH 07/10] ARM: ux500: Create a new Device Tree include file for boards supporting STUIBs   Lee Jones
• [PATCH 07/10] ARM: ux500: Create a new Device Tree include file for boards supporting STUIBs   Linus Walleij
• [PATCH 07/10] input: Enable STMPE keypad driver for Device Tree   Lee Jones
• [PATCH 07/10] input: Enable STMPE keypad driver for Device Tree   Dmitry Torokhov
• [PATCH 07/10] input: Enable STMPE keypad driver for Device Tree   Lee Jones
• [PATCH 07/10] pinctrl: remove mutex lock in groups show   Haojian Zhuang
• [PATCH 07/10] pinctrl: remove mutex lock in groups show   Linus Walleij
• [PATCH 07/10] pinctrl: remove mutex lock in groups show   Stephen Warren
• [PATCH 07/10] pinctrl: remove mutex lock in groups show   Linus Walleij
• [PATCH 07/11] ARM: OMAP: Move omap-pm-noop.c local to mach-omap2   Tony Lindgren
• [PATCH 07/11] ARM: OMAP: Move omap-pm-noop.c local to mach-omap2   Tony Lindgren
• [PATCH 07/11] ARM: OMAP: Move omap-pm-noop.c local to mach-omap2   Laurent Pinchart
• [PATCH 07/11] ARM: OMAP: Move omap-pm-noop.c local to mach-omap2   Tony Lindgren
• [PATCH 07/11] ARM: shmobile: r8a7779: add HSPI clock support   Simon Horman
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Vipin Kumar
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   viresh kumar
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Linus Walleij
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   viresh kumar
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Vipin Kumar
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Vipin Kumar
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   viresh kumar
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Linus Walleij
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   viresh kumar
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Linus Walleij
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Vipin Kumar
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Artem Bityutskiy
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Brian Norris
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Linus Walleij
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Artem Bityutskiy
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Artem Bityutskiy
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Linus Walleij
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Brian Norris
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Brian Norris
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Artem Bityutskiy
• [PATCH 07/11] fsmc/nand: Provide contiguous buffers to dma   Artem Bityutskiy
• [PATCH 07/11] SERIAL: omap: remove setting of EFR SCD bit   Russell King
• [PATCH 07/12] ARM: shmobile: r8a7779: add HSPI clock support   Simon Horman
• [PATCH 07/12] staging/iio/lis3l02dq: fix building without irq_to_gpio   Jonathan Cameron
• [PATCH 07/13] ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready()   Paul Walmsley
• [PATCH 07/15] ARM: OMAP2+: onenand: header cleanup   Afzal Mohammed
• [PATCH 07/15] pinctrl: samsung: Match pin banks with their device nodes   Tomasz Figa
• [PATCH 07/16] ARM: OMAP: Make plat/sram.h local to plat-omap   Tony Lindgren
• [PATCH 07/16] ARM: OMAP: Make plat/sram.h local to plat-omap   Jon Hunter
• [PATCH 07/16] ARM: OMAP: Make plat/sram.h local to plat-omap   Tony Lindgren
• [PATCH 07/16] cgroup: fix warning when building without any subsys   Arnd Bergmann
• [PATCH 07/16] cgroup: fix warning when building without any subsys   Ben Blum
• [PATCH 07/16] cgroup: fix warning when building without any subsys   Tejun Heo
• [PATCH 07/16] cgroup: fix warning when building without any subsys   Arnd Bergmann
• [PATCH 07/16] pinctrl: samsung: Hold OF node of pin bank in bank struct   Tomasz Figa
• [PATCH 08/10] ARM: FIQ: Implement !CONFIG_FIQ stubs   Anton Vorontsov
• [PATCH 08/10] ARM: imx: move imx6q_cpuidle_driver into a separate file   Shawn Guo
• [PATCH 08/10] ARM: shmobile: r8a7779: add I2C clock support   Simon Horman
• [PATCH 08/10] ARM: ux500: Stop calling the UIB init function when using Device Tree   Lee Jones
• [PATCH 08/10] ARM: ux500: Stop calling the UIB init function when using Device Tree   Linus Walleij
• [PATCH 08/10] ARM: ux500: Stop calling the UIB init function when using Device Tree   Lee Jones
• [PATCH 08/10] ARM: ux500: Stop calling the UIB init function when using Device Tree   Linus Walleij
• [PATCH 08/10] Documentation: Describe bindings for STMPE Keypad driver   Lee Jones
• [PATCH 08/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH 08/10] pinctrl: single: support pinconf generic   Linus Walleij
• [PATCH 08/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 08/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH 08/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 08/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 08/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 08/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 08/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH 08/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 08/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 08/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH 08/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 08/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH 08/11] ARM: OMAP: Remove plat-omap/common.h   Tony Lindgren
• [PATCH 08/11] ARM: shmobile: r8a7779: add I2C clock support   Simon Horman
• [PATCH 08/11] fsmc/nand: Use relaxed variants of io accessors   Vipin Kumar
• [PATCH 08/11] fsmc/nand: Use relaxed variants of io accessors   viresh kumar
• [PATCH 08/11] fsmc/nand: Use relaxed variants of io accessors   Linus Walleij
• [PATCH 08/11] SERIAL: omap: no need to re-read EFR   Russell King
• [PATCH 08/12] ARM: shmobile: r8a7779: add I2C clock support   Simon Horman
• [PATCH 08/13] ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions   Paul Walmsley
• [PATCH 08/15] ARM: OMAP2+: nand: header cleanup   Afzal Mohammed
• [PATCH 08/15] pinctrl: samsung: Hold pointer to driver data in bank struct   Tomasz Figa
• [PATCH 08/16] ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.h   Tony Lindgren
• [PATCH 08/16] ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.h   Tony Lindgren
• [PATCH 08/16] ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.h   Samuel Ortiz
• [PATCH 08/16] ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.h   Tony Lindgren
• [PATCH 08/16] ipvs: fix ip_vs_set_timeout debug messages   Arnd Bergmann
• [PATCH 08/16] ipvs: fix ip_vs_set_timeout debug messages   Julian Anastasov
• [PATCH 08/16] ipvs: fix ip_vs_set_timeout debug messages   Arnd Bergmann
• [PATCH 08/16] ipvs: fix ip_vs_set_timeout debug messages   Julian Anastasov
• [PATCH 08/16] ipvs: fix ip_vs_set_timeout debug messages   Arnd Bergmann
• [PATCH 08/16] ipvs: fix ip_vs_set_timeout debug messages   Simon Horman
• [PATCH 08/16] pinctrl: samsung: Hold pointer to driver data in bank struct   Tomasz Figa
• [PATCH 09.5/16] mmc: omap: Remove cpu_is_omap usage from the driver   Tony Lindgren
• [PATCH 09.5/16] mmc: omap: Remove cpu_is_omap usage from the driver   Chris Ball
• [PATCH 09.5/16] mmc: omap: Remove cpu_is_omap usage from the driver   Tony Lindgren
• [PATCH 09.5/16] mmc: omap: Remove cpu_is_omap usage from the driver   Tony Lindgren
• [PATCH 09/10] ARM: dts: support pinctrl single in pxa910   Haojian Zhuang
• [PATCH 09/10] ARM: FIQ: Make show_fiq_list() return void   Anton Vorontsov
• [PATCH 09/10] ARM: shmobile: r8a7779: add I2C driver support   Simon Horman
• [PATCH 09/10] ARM: SMP: add function arch_send_wakeup_ipi_mask()   Shawn Guo
• [PATCH 09/10] ARM: SMP: add function arch_send_wakeup_ipi_mask()   Shawn Guo
• [PATCH 09/10] ARM: ux500: Add all bu21013 touch screen components to supported Device Trees   Lee Jones
• [PATCH 09/10] ARM: ux500: Add all bu21013 touch screen components to supported Device Trees   Linus Walleij
• [PATCH 09/10] ARM: ux500: Apply a Device Tree node for the STMPE MFD   Lee Jones
• [PATCH 09/11] ARM: OMAP: Fix relative includes for debug-devices.h   Tony Lindgren
• [PATCH 09/11] ARM: OMAP: Fix relative includes for debug-devices.h   Paul Walmsley
• [PATCH 09/11] ARM: shmobile: r8a7779: add I2C driver support   Simon Horman
• [PATCH 09/11] fsmc/nand:FIX: replace change_bit routine   Vipin Kumar
• [PATCH 09/11] fsmc/nand:FIX: replace change_bit routine   Linus Walleij
• [PATCH 09/11] fsmc/nand:FIX: replace change_bit routine   Nicolas Pitre
• [PATCH 09/11] fsmc/nand:FIX: replace change_bit routine   Russell King - ARM Linux
• [PATCH 09/11] fsmc/nand:FIX: replace change_bit routine   Vipin Kumar
• [PATCH 09/11] fsmc/nand:FIX: replace change_bit routine   Vipin Kumar
• [PATCH 09/11] SERIAL: omap: fix set_mctrl() breakage   Russell King
• [PATCH 09/12] ARM: shmobile: r8a7779: add I2C driver support   Simon Horman
• [PATCH 09/12] tty/console: fix warnings in drivers/tty/serial/kgdboc.c   Greg Kroah-Hartman
• [PATCH 09/13] ARM: OMAP2+: PRCM: remove omap2_cm_wait_idlest()   Paul Walmsley
• [PATCH 09/15] mtd: nand: omap: bring in gpmc nand macros   Afzal Mohammed
• [PATCH 09/15] pinctrl: samsung: Include bank-specific eint offset in bank struct   Tomasz Figa
• [PATCH 09/16] ARM: OMAP: Split plat/mmc.h into local headers and platform_data   Tony Lindgren
• [PATCH 09/16] ARM: OMAP: Split plat/mmc.h into local headers and platform_data   Venkatraman S
• [PATCH 09/16] ARM: OMAP: Split plat/mmc.h into local headers and platform_data   Tony Lindgren
• [PATCH 09/16] pinctrl: exynos: Use one IRQ domain per pin bank   Tomasz Figa
• [PATCH 09/16] pinctrl: exynos: Use one IRQ domain per pin bank   Linus Walleij
• [PATCH 09/16] pinctrl: exynos: Use one IRQ domain per pin bank   Tomasz Figa
• [PATCH 09/16] USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit   Arnd Bergmann
• [PATCH 09/16] USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit   Alan Stern
• [PATCH 09/17] serial/8250: Limit the omap workarounds to omap1   Tony Lindgren
• [PATCH 09/24 v2] ARM: cns3xxx: use ehci platform driver   Florian Fainelli
• [PATCH 1/1] ARM64: Remove duplicate inclusion of mmu_context.h in smp.c   Sachin Kamat
• [PATCH 1/1] ARM64: Remove duplicate inclusion of mmu_context.h in smp.c   Catalin Marinas
• [PATCH 1/1] ARM: Add option to configure output line for McSPI driver   Tony Lindgren
• [PATCH 1/1] arm: at91: add Ronetix pm9g45 board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] arm: at91: drop duplicated config SOC_AT91SAM9 entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] arm: at91: drop duplicated config SOC_AT91SAM9 entry   Nicolas Ferre
• [PATCH 1/1] arm: KGDB support for PXA   Marko Katić
• [PATCH 1/1] arm: KGDB support for PXA   Haojian Zhuang
• [PATCH 1/1] arm: KGDB support for PXA   Greg KH
• [PATCH 1/1] ARM: OMAP: Add maintainer entry for IGEP machines   Javier Martinez Canillas
• [PATCH 1/1] Documentation: Describe Device Tree bindings for GPIO Regulator driver   Lee Jones
• [PATCH 1/1] Documentation: Describe Device Tree bindings for GPIO Regulator driver   Stephen Warren
• [PATCH 1/1] Documentation: Describe Device Tree bindings for GPIO Regulator driver   Mark Brown
• [PATCH 1/1] Fix segfault in DTC   Stephen Warren
• [PATCH 1/1] Fix segfault in DTC   David Gibson
• [PATCH 1/1] Fix segfault in DTC   Stephen Warren
• [PATCH 1/1] Fix segfault in DTC   David Gibson
• [PATCH 1/1] Fix segfault in DTC   Stephen Warren
• [PATCH 1/1] Fix segfault in DTC   David Gibson
• [PATCH 1/1] gpio/at91: auto request and configure the pio as input when the interrupt is used via DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] gpio/at91: auto request and configure the pio as input when the interrupt is used via DT   Linus Walleij
• [PATCH 1/1] gpio/at91: auto request and configure the pio as input when the interrupt is used via DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] gpio/at91: auto request and configure the pio as input when the interrupt is used via DT   Linus Walleij
• [PATCH 1/1] mmc: Standardise capability type   Lee Jones
• [PATCH 1/1] mmc: Standardise capability type   Arnd Bergmann
• [PATCH 1/1] mmc: Standardise capability type   Lee Jones
• [PATCH 1/1] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap   Nicolas Ferre
• [PATCH 1/1] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap   Josh Wu
• [PATCH 1/1] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap   Artem Bityutskiy
• [PATCH 1/1] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd:nand:clk: preparation for switch to common clock framework   Sekhar Nori
• [PATCH 1/1] mtd:nand:clk: preparation for switch to common clock framework   Sekhar Nori
• [PATCH 1/1] mtd: st fsmc_nand: pass the ale and cmd resource via resource   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd: st fsmc_nand: pass the ale and cmd resource via resource   Linus Walleij
• [PATCH 1/1] mtd: st fsmc_nand: pass the ale and cmd resource via resource   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd: st fsmc_nand: pass the ale and cmd resource via resource   Vipin Kumar
• [PATCH 1/1] mtd: st fsmc_nand: pass the ale and cmd resource via resource   Artem Bityutskiy
• [PATCH 1/1] net: macb: add pinctrl consumer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: macb: add pinctrl consumer support   Nicolas Ferre
• [PATCH 1/1] pinctrl/at91: fix compatible order   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] pinctrl/at91: fix compatible order   ludovic.desroches
• [PATCH 1/1] pinctrl/at91: fix compatible order   Linus Walleij
• [PATCH 1/1] pinctrl/at91: fix compatible order   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] pinctrl: at91: fix typo on PULL_UP   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] pinctrl: at91: fix typo on PULL_UP   Linus Walleij
• [PATCH 1/1] pinctrl: at91: fix typo on PULL_UP   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] pinctrl: at91: fix typo on PULL_UP   Linus Walleij
• [PATCH 1/1] spi:clk: preparation for switch to common clock framework   Sekhar Nori
• [PATCH 1/2] ARM: bcm2835: Add missing static modifiers   Domenico Andreoli
• [PATCH 1/2] ARM: bcm2835: Add missing static modifiers   Stephen Warren
• [PATCH 1/2] arm: bcm2835: move to the multiplatform support   Thomas Petazzoni
• [PATCH 1/2] arm: bcm2835: move to the multiplatform support   Stephen Warren
• [PATCH 1/2] arm: bcm2835: move to the multiplatform support   Thomas Petazzoni
• [PATCH 1/2] arm: bcm2835: move to the multiplatform support   Stephen Warren
• [PATCH 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Fabio Estevam
• [PATCH 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   javier Martin
• [PATCH 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Gaëtan Carlier
• [PATCH 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Mauro Carvalho Chehab
• [PATCH 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Mauro Carvalho Chehab
• [PATCH 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Fabio Estevam
• [PATCH 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Sascha Hauer
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Russell King
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Linus Walleij
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Jason Cooper
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Russell King - ARM Linux
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Russell King - ARM Linux
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Stephen Warren
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Tony Lindgren
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Linus Walleij
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Sekhar Nori
• [PATCH 1/2] ARM: config: sort select statements alphanumerically   Eric Miao
• [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators   Pavan Kunapuli
• [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators   Marc Dietrich
• [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators   Stephen Warren
• [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators   Marc Dietrich
• [PATCH 1/2] ARM: dts: OMAP: Add counter-32k nodes   Jon Hunter
• [PATCH 1/2] ARM: dts: OMAP: Add counter-32k nodes   Benoit Cousson
• [PATCH 1/2] ARM: dts: OMAP: Add counter-32k nodes   Jon Hunter
• [PATCH 1/2] ARM: Exynos4: Remove Samsung clock type support   chander.kashyap at linaro.org
• [PATCH 1/2] ARM: Exynos5250: Enabling ehci-s5p driver   Vivek Gautam
• [PATCH 1/2] ARM: Exynos5250: Enabling ehci-s5p driver   Jingoo Han
• [PATCH 1/2] ARM: Exynos5250: Enabling ehci-s5p driver   Vivek Gautam
• [PATCH 1/2] ARM: imx: clk: Split SSI clock into 'ipg' and 'per'   Fabio Estevam
• [PATCH 1/2] ARM: kirkwood: cleanup lsxl board includes   Michael Walle
• [PATCH 1/2] ARM: kirkwood: cleanup lsxl board includes   Jason Cooper
• [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Jason Cooper
• [PATCH 1/2] ARM: mach-imx: imx53.dtsi: pinctl update   Roland Stigge
• [PATCH 1/2] ARM: mach-imx: imx53.dtsi: pinctl update   Sascha Hauer
• [PATCH 1/2] ARM: mach-imx: imx53.dtsi: pinctl update   Shawn Guo
• [PATCH 1/2] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Gregory CLEMENT
• [PATCH 1/2] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Marek Szyprowski
• [PATCH 1/2] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Arnd Bergmann
• [PATCH 1/2] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Thomas Petazzoni
• [PATCH 1/2] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Arnd Bergmann
• [PATCH 1/2] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Thomas Petazzoni
• [PATCH 1/2] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Marek Szyprowski
• [PATCH 1/2] ARM: mx27_3ds: Reserve memory for camera usage   Fabio Estevam
• [PATCH 1/2] ARM: mx27_3ds: Reserve memory for camera usage   Gaëtan Carlier
• [PATCH 1/2] ARM: mx27_3ds: Reserve memory for camera usage   Sascha Hauer
• [PATCH 1/2] ARM: mx27_3ds: Reserve memory for camera usage   Fabio Estevam
• [PATCH 1/2] ARM: mx27_3ds: Reserve memory for camera usage   Sascha Hauer
• [PATCH 1/2] ARM: nomadik: switch over to using the FSMC driver   Linus Walleij
• [PATCH 1/2] ARM: nomadik: switch over to using the FSMC driver   Linus Walleij
• [PATCH 1/2] ARM: nomadik: switch over to using the FSMC driver   Alessandro Rubini
• [PATCH 1/2] ARM: nomadik: switch over to using the FSMC driver   Artem Bityutskiy
• [PATCH 1/2] ARM: nomadik: switch over to using the FSMC driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: nomadik: switch over to using the FSMC driver   Linus Walleij
• [PATCH 1/2] ARM: nomadik: switch over to using the FSMC driver   Mike Turquette
• [PATCH 1/2] ARM: OMAP2+: Fix location of select PINCTRL   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Introduce local usb.h   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Introduce local usb.h   Felipe Balbi
• [PATCH 1/2] ARM: OMAP2+: Introduce local usb.h   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: move mailbox.h out of plat-omap headers   Omar Ramirez Luna
• [PATCH 1/2] ARM: OMAP2+: move mailbox.h out of plat-omap headers   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: move mailbox.h out of plat-omap headers   Omar Ramirez Luna
• [PATCH 1/2] ARM: OMAP2+: move mailbox.h out of plat-omap headers   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: move mailbox.h out of plat-omap headers   Greg Kroah-Hartman
• [PATCH 1/2] ARM: OMAP2+: move mailbox.h out of plat-omap headers   Omar Ramirez Luna
• [PATCH 1/2] ARM: OMAP2+: move mailbox.h out of plat-omap headers   Loic PALLARDY
• [PATCH 1/2] ARM: OMAP2+: move mailbox.h out of plat-omap headers   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: hwmod: Add possibility to count hwmod resources based on type   Peter Ujfalusi
• [PATCH 1/2] ARM: OMAP: hwmod: align the SmartReflex fck names   jean.pihet at newoldbits.com
• [PATCH 1/2] ARM: OMAP: hwmod: align the SmartReflex fck names   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: hwmod: align the SmartReflex fck names   Jean Pihet
• [PATCH 1/2] ARM: OMAP: hwmod: align the SmartReflex fck names   Kevin Hilman
• [PATCH 1/2] ARM: OMAP: hwmod: align the SmartReflex fck names   jean.pihet at newoldbits.com
• [PATCH 1/2] ARM: OMAP: hwmod: align the SmartReflex fck names   Jean Pihet
• [PATCH 1/2] ARM: OMAP: SmartReflex: fix error path in init function   Kevin Hilman
• [PATCH 1/2] ARM: OMAP: Trivial driver changes to remove include plat/cpu.h   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: Trivial driver changes to remove include plat/cpu.h   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: Trivial driver changes to remove include plat/cpu.h   Jarkko Nikula
• [PATCH 1/2] ARM: OMAP: Trivial driver changes to remove include plat/cpu.h   Péter Ujfalusi
• [PATCH 1/2] ARM: OMAP: Trivial driver changes to remove include plat/cpu.h   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: Trivial driver changes to remove include plat/cpu.h   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: Trivial driver changes to remove include plat/cpu.h   Tony Lindgren
• [PATCH 1/2] arm: plat-orion: Add coherency attribute when setup mbus target   Gregory CLEMENT
• [PATCH 1/2] arm: plat-orion: Add coherency attribute when setup mbus target   Thomas Petazzoni
• [PATCH 1/2] ARM: plat-versatile: use simple irqdomain for FPGA IRQ   Linus Walleij
• [PATCH 1/2] ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip   Kukjin Kim
• [PATCH 1/2] ARM: shmobile: armadillo800eva: __io abuse cleanup   Simon Horman
• [PATCH 1/2] ARM: shmobile: mackerel: defconfig update   Simon Horman
• [PATCH 1/2] ARM: SMP_TWD: use DIV_ROUND_CLOSEST() for periodic mode   Linus Walleij
• [PATCH 1/2] ARM: tegra: Add speedo-based process identification   Danny Huang
• [PATCH 1/2] ARM: tegra: Add speedo-based process identification   Stephen Warren
• [PATCH 1/2] ARM: tegra: dt: add L2 cache controller   Joseph Lo
• [PATCH 1/2] ARM: tegra: dt: add L2 cache controller   Stephen Warren
• [PATCH 1/2] ARM: tegra: dt: add L2 cache controller   Joseph Lo
• [PATCH 1/2] ARM: tegra: dt: add L2 cache controller   Stephen Warren
• [PATCH 1/2] ARM: tegra: fix invalid unit-address in tegra*.dtsi   Stephen Warren
• [PATCH 1/2] ARM: tegra: fix invalid unit-address in tegra*.dtsi   Thierry Reding
• [PATCH 1/2] ARM: tegra: fix invalid unit-address in tegra*.dtsi   Olof Johansson
• [PATCH 1/2] ARM: tegra: move iomap.h to mach-tegra   Stephen Warren
• [PATCH 1/2] ARM: tegra: move iomap.h to mach-tegra   Stephen Warren
• [PATCH 1/2] ARM: tegra: rename tegra system timer   Sivaram Nair
• [PATCH 1/2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Tony Prisk
• [PATCH 1/2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Arnd Bergmann
• [PATCH 1/2] ASoC: atmel-ssc: use devm_xxx() managed function   Bo Shen
• [PATCH 1/2] ASoC: atmel-ssc: use devm_xxx() managed function   Mark Brown
• [PATCH 1/2] ASoC: atmel-ssc: use devm_xxx() managed function   Nicolas Ferre
• [PATCH 1/2] ASoC: Ux500: Dispose of device nodes correctly   Lee Jones
• [PATCH 1/2] ASoC: Ux500: Dispose of device nodes correctly   Mark Brown
• [PATCH 1/2] ASoC: Ux500: Fixup complile errors due to merge   Ulf Hansson
• [PATCH 1/2] ASoC: Ux500: Fixup complile errors due to merge   Lee Jones
• [PATCH 1/2] ASoC: Ux500: Fixup use of clocks   Ulf Hansson
• [PATCH 1/2] ASoC: Ux500: Fixup use of clocks   Linus Walleij
• [PATCH 1/2] ASoC: Ux500: Fixup use of clocks   Mark Brown
• [PATCH 1/2] clk: ux500: Register mtu apb_pclocks   Ulf Hansson
• [PATCH 1/2] clk: ux500: Register rng clock lookups for u8500   Ulf Hansson
• [PATCH 1/2] cpufreq: return early from __cpufreq_driver_getavg()   Viresh Kumar
• [PATCH 1/2] cpufreq: return early from __cpufreq_driver_getavg()   Rafael J. Wysocki
• [PATCH 1/2] cpufreq: return early from __cpufreq_driver_getavg()   Viresh Kumar
• [PATCH 1/2] cpufreq: return early from __cpufreq_driver_getavg()   Viresh Kumar
• [PATCH 1/2] cpufreq: return early from __cpufreq_driver_getavg()   Rafael J. Wysocki
• [PATCH 1/2] dm644x: replace the obsolete preset API by the timings API.   Sekhar Nori
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Stephen Warren
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Stephen Warren
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Peter Korsgaard
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Peter Korsgaard
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Peter Korsgaard
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Maxime Ripard
• [PATCH 1/2] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti D
• [PATCH 1/2] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCH 1/2] input: gpio-keys: Disable hardware on suspend   Lee Jones
• [PATCH 1/2] input: gpio-keys: Disable hardware on suspend   Dmitry Torokhov
• [PATCH 1/2] input: qt1070: add pinctrl consumer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] input: qt1070: add pinctrl consumer   Bo Shen
• [PATCH 1/2] input: qt1070: add pinctrl consumer   Linus Walleij
• [PATCH 1/2] input: qt1070: add pinctrl consumer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] mmc: core: Support all MMC capabilities when booting from Device Tree   Lee Jones
• [PATCH 1/2] mmc: core: Support all MMC capabilities when booting from Device Tree   Arnd Bergmann
• [PATCH 1/2] mmc: core: Support all MMC capabilities when booting from Device Tree   Lee Jones
• [PATCH 1/2] mmc: core: Support all MMC capabilities when booting from Device Tree   Arnd Bergmann
• [PATCH 1/2] mmc: core: Support all MMC capabilities when booting from Device Tree   Ulf Hansson
• [PATCH 1/2] mmc: core: Support all MMC capabilities when booting from Device Tree   Philip Rakity
• [PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Ulf Hansson
• [PATCH 1/2] mtd: sh_flctl: Add DMA capabilty   Bastian Hecht
• [PATCH 1/2] mtd: sh_flctl: Add DMA capabilty   Guennadi Liakhovetski
• [PATCH 1/2] mtd: sh_flctl: Add DMA capabilty   Bastian Hecht
• [PATCH 1/2] of: add of_property_count_phandles   Mark Rutland
• [PATCH 1/2] pinctrl/: at91: fix warmings   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] pinctrl/: at91: fix warmings   Linus Walleij
• [PATCH 1/2] pinctrl/: at91: fix warmings   Russell King - ARM Linux
• [PATCH 1/2] regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT   Lee Jones
• [PATCH 1/2] regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT   Mark Brown
• [PATCH 1/2] regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT   Lee Jones
• [PATCH 1/2] regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT   Mark Brown
• [PATCH 1/2] regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT   Lee Jones
• [PATCH 1/2] regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT   Mark Brown
• [PATCH 1/2] regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT   Lee Jones
• [PATCH 1/2] regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT   Mark Brown
• [PATCH 1/2] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Ulf Hansson
• [PATCH 1/2] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Mark Brown
• [PATCH 1/2] rtc-imxdi: Support for i.MX53   Roland Stigge
• [PATCH 1/2] rtc-imxdi: Support for i.MX53   Sascha Hauer
• [PATCH 1/2] spi: mxs: Assign message status after transfer finished   Marek Vasut
• [PATCH 1/2] spi: mxs: Assign message status after transfer finished   Mark Brown
• [PATCH 1/2] spi: mxs: Assign message status after transfer finished   Marek Vasut
• [PATCH 1/2] spi: mxs: Assign message status after transfer finished   Mark Brown
• [PATCH 1/2] spi: mxs: Assign message status after transfer finished   Marek Vasut
• [PATCH 1/2] spi: spidev: Add device tree bindings   Maxime Ripard
• [PATCH 1/2] spi: spidev: Add device tree bindings   Shawn Guo
• [PATCH 1/2] spi: spidev: Add device tree bindings   Maxime Ripard
• [PATCH 1/2] spi: spidev: Add device tree bindings   Mark Brown
• [PATCH 1/2] spi: spidev: Add device tree bindings   Maxime Ripard
• [PATCH 1/2] spi: spidev: Add device tree bindings   Mark Brown
• [PATCH 1/2] USB: Update EHCI-platform driver to devicetree.   Tony Prisk
• [PATCH 1/2] USB: Update EHCI-platform driver to devicetree.   Florian Fainelli
• [PATCH 1/2] USB: Update EHCI-platform driver to devicetree.   Alan Stern
• [PATCH 1/2] USB: Update EHCI-platform driver to devicetree.   Tony Prisk
• [PATCH 1/2] USB: Update EHCI-platform driver to devicetree.   Tony Prisk
• [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller   Florian Tobias Schandinat
• [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH 1/3] ARM: dts: imx53-qsb: Use pinctrl for gpio-led   Shawn Guo
• [PATCH 1/3] ARM: dts: Renaming elpida_ecb240abacn.dtsi as lpddr2_data.dtsi   Lokesh Vutla
• [PATCH 1/3] ARM: dts: Renaming elpida_ecb240abacn.dtsi as lpddr2_data.dtsi   Benoit Cousson
• [PATCH 1/3] ARM: dts: Renaming elpida_ecb240abacn.dtsi as lpddr2_data.dtsi   Lokesh Vutla
• [PATCH 1/3] ARM: dts: Renaming elpida_ecb240abacn.dtsi as lpddr2_data.dtsi   Benoit Cousson
• [PATCH 1/3] ARM: dts: Renaming elpida_ecb240abacn.dtsi as lpddr2_data.dtsi   Lokesh Vutla
• [PATCH 1/3] ARM: dts: Update board files for pwm support   Tony Prisk
• [PATCH 1/3] ARM: dts: Update board files for pwm support   Tony Prisk
• [PATCH 1/3] ARM: Kirkwood: Remove unused includes   Andrew Lunn
• [PATCH 1/3] ARM: LPC32xx: Remove superfluous irq_alloc_descs()   Roland Stigge
• [PATCH 1/3] ARM: mvebu: Add support I2C controller   Nobuhiro Iwamatsu
• [PATCH 1/3] ARM: mvebu: Add support I2C controller   Thomas Petazzoni
• [PATCH 1/3] ARM: OMAP2+: fix build breakage introduced by commit b7754452b3e27716347a528b47b0a1083af32520   Paul Walmsley
• [PATCH 1/3] ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode   Bastian Hecht
• [PATCH 1/3] ARM: shmobile: mackerel: defconfig update   Simon Horman
• [PATCH 1/3] ARM: shmobile: mark shmobile_init_late as __init   Arnd Bergmann
• [PATCH 1/3] ARM: tegra: simplify DEBUG_LL UART selection options   Stephen Warren
• [PATCH 1/3] ARM: tegra: simplify DEBUG_LL UART selection options   Thierry Reding
• [PATCH 1/3] ARM: tegra: simplify DEBUG_LL UART selection options   Stephen Warren
• [PATCH 1/3] ARM: timer: fix checkpatch warnings   Stephen Warren
• [PATCH 1/3] ARM: timer: fix checkpatch warnings   Stephen Warren
• [PATCH 1/3] ARM i.MX25: Fix lcdc_ipg_per parent clock   Sascha Hauer
• [PATCH 1/3] clk: Document .is_enabled op   Stephen Boyd
• [PATCH 1/3] dmaengine: dw_dmac: Update documentation style comments for dw_dma_platform_data   Viresh Kumar
• [PATCH 1/3] dmaengine: sirf: fix a typo in dma_prep_interleaved   Barry Song
• [PATCH 1/3] dmaengine: sirf: fix a typo in dma_prep_interleaved   Vinod Koul
• [PATCH 1/3] drivers: bus: ocp2scp: add pdata support   Kishon Vijay Abraham I
• [PATCH 1/3] i2c: i2c-mux-gpio: Use devm_kzalloc instead of kzalloc   Jean Delvare
• [PATCH 1/3] i2c: omap: Do not enable the irq always   Shubhrajyoti D
• [PATCH 1/3] i2c: omap: Do not enable the irq always   Russell King - ARM Linux
• [PATCH 1/3] i2c: omap: Do not enable the irq always   Kevin Hilman
• [PATCH 1/3] i2c: omap: Do not enable the irq always   Kevin Hilman
• [PATCH 1/3] i2c: omap: Do not enable the irq always   Shubhrajyoti
• [PATCH 1/3] i2c: omap: Do not enable the irq always   Shubhrajyoti Datta
• [PATCH 1/3] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCH 1/3] irqchip: add basic infrastructure   Arnd Bergmann
• [PATCH 1/3] irqchip: add basic infrastructure   Thomas Gleixner
• [PATCH 1/3] irqchip: add basic infrastructure   Stephen Warren
• [PATCH 1/3] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCH 1/3] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Rob Herring
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Thomas Petazzoni
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Rob Herring
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Rob Herring
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Thomas Petazzoni
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Russell King - ARM Linux
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Rob Herring
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Russell King - ARM Linux
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Catalin Marinas
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Rob Herring
• [PATCH 1/3] irqchip: Move ARM GIC to drivers/irqchip   Russell King - ARM Linux
• [PATCH 1/3] mfd: dbx500: Export prmcu_request_ape_opp_100_voltage   Ulf Hansson
• [PATCH 1/3] mfd: dbx500: Export prmcu_request_ape_opp_100_voltage   Samuel Ortiz
• [PATCH 1/3] mfd: dbx500: Export prmcu_request_ape_opp_100_voltage   Linus Walleij
• [PATCH 1/3] mfd: dbx500: Export prmcu_request_ape_opp_100_voltage   Mike Turquette
• [PATCH 1/3] pinctrl/coh901: use irqdomain, allocate irqdescs   Linus Walleij
• [PATCH 1/3] pinctrl: mvebu: allow plat-orion architectures to use pinctrl-mvebu   Thomas Petazzoni
• [PATCH 1/3] pinctrl: mvebu: allow plat-orion architectures to use pinctrl-mvebu   Linus Walleij
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Ulf Hansson
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Mark Brown
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Ulf Hansson
• [PATCH 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Mark Brown
• [PATCH 1/3] RTC: omap-rtc: enable for SOC_AM33XX   Daniel Mack
• [PATCH 1/3] serial: mxs-auart: distinguish the different SOCs   Huang Shijie
• [PATCH 1/3] serial: mxs-auart: distinguish the different SOCs   Shawn Guo
• [PATCH 1/3] serial: omap: Make context_loss_cnt signed   Shubhrajyoti D
• [PATCH 1/3] serial_core: Add helper for matching against linux, stdout-path   Sascha Hauer
• [PATCH 1/3] serial_core: Add helper for matching against linux, stdout-path   Rob Herring
• [PATCH 1/3] spi: spidev: Add device tree bindings   Maxime Ripard
• [PATCH 1/4] ARM/dts: omap5: Update GPIO with address space and interrupt   Sebastien Guiriec
• [PATCH 1/4] arm64: Select MODULES_USE_ELF_RELA   Catalin Marinas
• [PATCH 1/4] arm64: Select MODULES_USE_ELF_RELA   Will Deacon
• [PATCH 1/4] ARM: annotate VMALLOC_END definition with _AC   Josh Cartwright
• [PATCH 1/4] ARM: AT91: Add DT support to AT91RM9200 System Timer   Joachim Eastwood
• [PATCH 1/4] ARM: AT91: Add DT support to AT91RM9200 System Timer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] ARM: EXYNOS: Kconfig: Rename CPU_EXYNOS4210 to SOC_EXYNOS4210   Tomasz Figa
• [PATCH 1/4] ARM: EXYNOS: Kconfig: Rename CPU_EXYNOS4210 to SOC_EXYNOS4210   Kukjin Kim
• [PATCH 1/4] ARM: EXYNOS: Kconfig: Rename CPU_EXYNOS4210 to SOC_EXYNOS4210   Tomasz Figa
• [PATCH 1/4] ARM: EXYNOS: Skip wakeup-int setup if pinctrl driver is used on Exynos4x12   Tomasz Figa
• [PATCH 1/4] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 1/4] ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP   Paul Walmsley
• [PATCH 1/4] ARM: OMAP2+: gpmc: generic timing calculation   Afzal Mohammed
• [PATCH 1/4] ARM: OMAP: Merge iommu2.h into iommu.h   Tony Lindgren
• [PATCH 1/4] ARM: shmobile: Remove G3EVM machine support   Nobuhiro Iwamatsu
• [PATCH 1/4] ARM: shmobile: Remove G3EVM machine support   Simon Horman
• [PATCH 1/4] cpufreq: OMAP: ensure valid clock rate before scaling   Kevin Hilman
• [PATCH 1/4] DMA: PL330: fix locking in pl330_free_chan_resources()   Bartlomiej Zolnierkiewicz
• [PATCH 1/4] DMA: PL330: fix locking in pl330_free_chan_resources()   Jassi Brar
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Simon Guinot
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Jason Cooper
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Simon Guinot
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Jason Cooper
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Simon Guinot
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Arnd Bergmann
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Simon Guinot
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Jason Cooper
• [PATCH 1/4] leds: leds-ns2: add device tree binding   Arnd Bergmann
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth H.V
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Lee Jones
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth HV
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Lee Jones
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Lee Jones
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Francesco Lavra
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth H.V
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Francesco Lavra
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth HV
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Francesco Lavra
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth H.V
• [PATCH 1/4] mtd: nand: omap2: Update nerrors using ecc.strength   Philip, Avinash
• [PATCH 1/4] mtd: nand: omap2: Update nerrors using ecc.strength   Peter Korsgaard
• [PATCH 1/4] mtd: nand: omap2: Update nerrors using ecc.strength   Philip, Avinash
• [PATCH 1/4] mtd: omap-nand: pass device_node in platform data   Daniel Mack
• [PATCH 1/4] net: davinci_mdio: Fix typo mistake in calling runtime-pm api   Vaibhav Hiremath
• [PATCH 1/4] net: davinci_mdio: Fix typo mistake in calling runtime-pm api   Peter Korsgaard
• [PATCH 1/4] net: fec: move fec_enet_private to header file   Frank Li
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   David Miller
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Nobuhiro Iwamatsu
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Florian Fainelli
• [PATCH 1/4] usb: phy: add a new driver for usb3 phy   Tony Lindgren
• [PATCH 1/4] usb: phy: add a new driver for usb3 phy   kishon
• [PATCH 1/4] usb: phy: add a new driver for usb3 phy   Tony Lindgren
• [PATCH 1/4] vt8500: Remove unused headers from include/mach/   Tony Prisk
• [PATCH 1/5] ARM: at91: atmel-ssc: add platform device id table   Bo Shen
• [PATCH 1/5] ARM: at91: atmel-ssc: add platform device id table   Mark Brown
• [PATCH 1/5] ARM: at91: atmel-ssc: add platform device id table   Nicolas Ferre
• [PATCH 1/5] ARM: AT91: Fix build failure on board-dt   Joachim Eastwood
• [PATCH 1/5] ARM: AT91: Fix build failure on board-dt   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] ARM: AT91: Fix build failure on board-dt   Joachim Eastwood
• [PATCH 1/5] ARM: Kirkwood: Allow use of pinctrl   Andrew Lunn
• [PATCH 1/5] ARM: Kirkwood: Allow use of pinctrl   Linus Walleij
• [PATCH 1/5] ARM: Kirkwood: Allow use of pinctrl   Thomas Petazzoni
• [PATCH 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Richard Cochran
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Tony Lindgren
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Jon Hunter
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Jon Hunter
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Tony Lindgren
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Jon Hunter
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Tony Lindgren
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Hiremath, Vaibhav
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Jon Hunter
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Hiremath, Vaibhav
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Jon Hunter
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Hiremath, Vaibhav
• [PATCH 1/5] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Jon Hunter
• [PATCH 1/5] ARM: OMAP2+: PRM: remove PRM weak functions   Paul Walmsley
• [PATCH 1/5] ARM: omap: vc: replace data_shift with data_mask   Mike Turquette
• [PATCH 1/5] ARM: omap: vc: replace data_shift with data_mask   Kevin Hilman
• [PATCH 1/5] ARM: plat-nomadik: Introduce new DB8540 GPIO registers   Linus Walleij
• [PATCH 1/5] ARM: PXA: Add z2-usb-switch driver   Vasily Khoruzhick
• [PATCH 1/5] ARM: PXA: Add z2-usb-switch driver   Vasily Khoruzhick
• [PATCH 1/5] ARM: tegra: Add slink controller base address   Laxman Dewangan
• [PATCH 1/5] ARM: tegra: Add slink controller base address   Stephen Warren
• [PATCH 1/5] ARM: tegra: Add slink controller base address   Laxman Dewangan
• [PATCH 1/5] clk: ux500: Register i2c clock lookups for u8500   Ulf Hansson
• [PATCH 1/5] i2c: i2c-sh_mobile: calculate clock parameters at driver probing time   Shinya Kuribayashi
• [PATCH 1/5] net/cadence: get rid of HAVE_NET_MACB   Joachim Eastwood
• [PATCH 1/5] net/cadence: get rid of HAVE_NET_MACB   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] net/cadence: get rid of HAVE_NET_MACB   Joachim Eastwood
• [PATCH 1/5] net/cadence: get rid of HAVE_NET_MACB   David Miller
• [PATCH 1/5] net/cadence: get rid of HAVE_NET_MACB   Joachim Eastwood
• [PATCH 1/5] net/cadence: get rid of HAVE_NET_MACB   David Miller
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH 1/5 v6] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH 1/6] arch: Change defconfigs to point to g_mass_storage.   Michal Nazarewicz
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Domenico Andreoli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Domenico Andreoli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Florian Fainelli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Thomas Petazzoni
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Stephen Warren
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Stephen Warren
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Stephen Warren
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Stephen Warren
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Arnd Bergmann
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Domenico Andreoli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Domenico Andreoli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Domenico Andreoli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Domenico Andreoli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Domenico Andreoli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Arnd Bergmann
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Domenico Andreoli
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Thomas Petazzoni
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Arnd Bergmann
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Thomas Petazzoni
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Arnd Bergmann
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Thomas Petazzoni
• [PATCH 1/6] ARM: bcm476x: Add infrastructure   Arnd Bergmann
• [PATCH 1/6] ARM: EXYNOS5: Clock settings for SATA and SATA PHY   Vasanth Ananthan
• [PATCH 1/6] ARM: highbank: disable unused sdhci and gpio in dts   Rob Herring
• [PATCH 1/6] ARM: OMAP3/4: iommu: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH 1/6] ARM: OMAP: Merge iommu2.h into iommu.h   Tony Lindgren
• [PATCH 1/6] ARM: OMAP: Merge iommu2.h into iommu.h   Tony Lindgren
• [PATCH 1/6] arm: use devicetree to get smp_twd clock   Mark Langsdorf
• [PATCH 1/6] arm: use devicetree to get smp_twd clock   Mark Langsdorf
• [PATCH 1/6] ARM: ux500: Remove unused board compatible string   Lee Jones
• [PATCH 1/6] DMA: AT91: Serial: Add parameter for serial dma use   Elen Song
• [PATCH 1/6] DMA: AT91: Serial: Add parameter for serial dma use   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] DMA: AT91: Serial: Add parameter for serial dma use   Elen Song
• [PATCH 1/6] DMA: AT91: Serial: Add parameter for serial dma use   Elen Song
• [PATCH 1/6] mfd: ab8500-core: Remove unused ab8500-gpio IRQ ranges   Lee Jones
• [PATCH 1/6] mfd: ab8500-core: Remove unused ab8500-gpio IRQ ranges   Linus Walleij
• [PATCH 1/6] pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev   Felipe Balbi
• [PATCH 1/7] ARM: clps711x: convert to clockevents   Alexander Shiyan
• [PATCH 1/7] ARM: clps711x: convert to clockevents   Arnd Bergmann
• [PATCH 1/7] ARM: clps711x: convert to clockevents   Arnd Bergmann
• [PATCH 1/7] ARM: EXYNOS: add support for EXYNOS5440 SoC   Kukjin Kim
• [PATCH 1/7] ARM: EXYNOS: add support for EXYNOS5440 SoC   Kukjin Kim
• [PATCH 1/7] ARM: EXYNOS: add support for EXYNOS5440 SoC   Kukjin Kim
• [PATCH 1/7] ARM: EXYNOS: add support for EXYNOS5440 SoC   Tomasz Figa
• [PATCH 1/7] ARM: hw_breakpoint: only clear OS lock when implemented on v7   Will Deacon
• [PATCH 1/7] ARM: hw_breakpoint: only clear OS lock when implemented on v7   Stephen Boyd
• [PATCH 1/7] ARM: hw_breakpoint: only clear OS lock when implemented on v7   Will Deacon
• [PATCH 1/7] ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers   Paul Walmsley
• [PATCH 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Paul Walmsley
• [PATCH 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Paul Walmsley
• [PATCH 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH 1/7] ARM: omap: add 3630 PRM register definitions   Mike Turquette
• [PATCH 1/7] ARM: perf: add guest vs host discrimination   Will Deacon
• [PATCH 1/7] ARM: tegra: cpuidle: separate cpuidle driver for different chips   Joseph Lo
• [PATCH 1/7] ARM: tegra: cpuidle: separate cpuidle driver for different chips   Stephen Warren
• [PATCH 1/7] ARM: tegra: cpuidle: separate cpuidle driver for different chips   Joseph Lo
• [PATCH 1/7] ARM: ux500: Elaborate on SDI device node names in Device Tree   Lee Jones
• [PATCH 1/8] [media] s5p-fimc: Use clk_prepare_enable and clk_disable_unprepare   Sylwester Nawrocki
• [PATCH 1/8] [media] s5p-fimc: Use clk_prepare_enable and clk_disable_unprepare   Sachin Kamat
• [PATCH 1/8] [media] s5p-fimc: Use clk_prepare_enable and clk_disable_unprepare   Sylwester Nawrocki
• [PATCH 1/8] [media] s5p-fimc: Use clk_prepare_enable and clk_disable_unprepare   Sachin Kamat
• [PATCH 1/8] ARM: at91/tc: fix typo in the DT document   Nicolas Ferre
• [PATCH 1/8] ARM: S3C64XX: Add more Glenfarclas module ID strings   Mark Brown
• [PATCH 1/8] ARM: shmobile: kzm9g: enable magnetometer ak8975.   Simon Horman
• [PATCH 1/8] ARM: ux500: Enable all MMC devices on the u9540 when booting with DT   Lee Jones
• [PATCH 1/8] ARM: ux500: Remove cpufreq platform device   Ulf Hansson
• [PATCH 1/8] ARM: zynq: move arm-specific sys_timer out of ttc   Josh Cartwright
• [PATCH 1/8] clk/ux500: explicitly include register header   Linus Walleij
• [PATCH 1/8] i2c: omap: no need to access platform_device   Felipe Balbi
• [PATCH 1/8] Ux5x0 patches loosely surrounding u9540 enablement   Lee Jones
• [PATCH 1/9] ARM: Kirkwood: Convert TS219 to pinctrl.   Andrew Lunn
• [PATCH 1/9] ARM: Kirkwood: Convert TS219 to pinctrl.   Thomas Petazzoni
• [PATCH 1/9] ARM: Kirkwood: Convert TS219 to pinctrl.   Sebastian Hesselbarth
• [PATCH 1/9] ARM: Kirkwood: Convert TS219 to pinctrl.   Thomas Petazzoni
• [PATCH 1/9] ARM: Kirkwood: Convert TS219 to pinctrl.   Andrew Lunn
• [PATCH 1/9] ARM: Kirkwood: Convert TS219 to pinctrl.   Thomas Petazzoni
• [PATCH 1/9] ARM: Kirkwood: Convert TS219 to pinctrl.   Sebastian Hesselbarth
• [PATCH 1/9] ARM: Kirkwood: Convert TS219 to pinctrl.   Thomas Petazzoni
• [PATCH 1/9] ARM: kprobes: make more tests conditional   Arnd Bergmann
• [PATCH 1/9] ARM: OMAP: board-4430-sdp: Pin mux configuration for audio needs   Peter Ujfalusi
• [PATCH 1/9] pinctrl: SPEAr: Don't update all non muxreg bits on pinctrl_disable   Viresh Kumar
• [PATCH 1/9] uprobes: move function declarations out of arch   Rabin Vincent
• [PATCH 1/9] uprobes: move function declarations out of arch   Srikar Dronamraju
• [PATCH 1/9] uprobes: move function declarations out of arch   Rabin Vincent
• [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Anton Vorontsov
• [PATCH 10/10] ARM: imx6q: implement WAIT mode with coupled cpuidle   Shawn Guo
• [PATCH 10/10] ARM: imx6q: implement WAIT mode with coupled cpuidle   Lee Robert-B18647
• [PATCH 10/10] ARM: imx6q: implement WAIT mode with coupled cpuidle   Lorenzo Pieralisi
• [PATCH 10/10] ARM: imx6q: implement WAIT mode with coupled cpuidle   Shawn Guo
• [PATCH 10/10] ARM: imx6q: implement WAIT mode with coupled cpuidle   Shawn Guo
• [PATCH 10/10] ARM: imx6q: implement WAIT mode with coupled cpuidle   Lorenzo Pieralisi
• [PATCH 10/10] ARM: shmobile: marzen: add HSPI support   Simon Horman
• [PATCH 10/10] ARM: ux500: Stop informing the regulator subsystem that we have full constraints   Lee Jones
• [PATCH 10/10] ARM: ux500: Stop informing the regulator subsystem that we have full constraints   Linus Walleij
• [PATCH 10/10] ARM: ux500: Supply the STMPE keypad Device Tree node to the STUIB DT   Lee Jones
• [PATCH 10/10] document: devicetree: bind pinconf in pinctrl single   Haojian Zhuang
• [PATCH 10/10] document: devicetree: bind pinconf in pinctrl single   Tony Lindgren
• [PATCH 10/11] ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372   Simon Horman
• [PATCH 10/11] ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.c   Tony Lindgren
• [PATCH 10/11] fsmc/nand: Add sw bch support for ecc calculation/correction   Vipin Kumar
• [PATCH 10/11] fsmc/nand: Add sw bch support for ecc calculation/correction   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] fsmc/nand: Add sw bch support for ecc calculation/correction   Vipin Kumar
• [PATCH 10/11] SERIAL: omap: fix MCR TCRTLR bit handling   Russell King
• [PATCH 10/11] SERIAL: omap: fix MCR TCRTLR bit handling   Russell King - ARM Linux
• [PATCH 10/12] ARM: shmobile: marzen: add HSPI support   Simon Horman
• [PATCH 10/13] ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup   Paul Walmsley
• [PATCH 10/15] ARM: OMAP2+: nand: bch capability check   Afzal Mohammed
• [PATCH 10/15] pinctrl: exynos: Use one IRQ domain per pin bank   Tomasz Figa
• [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2   Tony Lindgren
• [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2   Paul Walmsley
• [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2   Tony Lindgren
• [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2   Paul Walmsley
• [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2   Tony Lindgren
• [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2   Paul Walmsley
• [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2   Tony Lindgren
• [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2   Paul Walmsley
• [PATCH 10/16] clk: don't mark clkdev_add_table as init   Arnd Bergmann
• [PATCH 10/16] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank   Tomasz Figa
• [PATCH 10/16] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank   Linus Walleij
• [PATCH 10/16] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank   Tomasz Figa
• [PATCH 10/32 v3] ARM: cns3xxx: use ehci platform driver   Florian Fainelli
• [PATCH 10/32 v4] ARM: cns3xxx: use ehci platform driver   Florian Fainelli
• [PATCH 11/11] ARM: OMAP1: Remove relative includes   Tony Lindgren
• [PATCH 11/11] ARM: OMAP1: Remove relative includes   Tony Lindgren
• [PATCH 11/11] ARM: shmobile: r8a7740: Enable PMU   Simon Horman
• [PATCH 11/11] nand: Increase the ecc placement locations to 640   Vipin Kumar
• [PATCH 11/11] nand: Increase the ecc placement locations to 640   Artem Bityutskiy
• [PATCH 11/11] nand: Increase the ecc placement locations to 640   Brian Norris
• [PATCH 11/11] SERIAL: omap: fix hardware assisted flow control   Russell King
• [PATCH 11/12] ARM: shmobile: r8a7740: fixup DT machine desc name typo   Simon Horman
• [PATCH 11/12] pinctrl: samsung: use __devinit section for init code   Linus Walleij
• [PATCH 11/12] pinctrl: samsung: use __devinit section for init code   Arnd Bergmann
• [PATCH 11/12] pinctrl: samsung: use __devinit section for init code   Linus Walleij
• [PATCH 11/12] pinctrl: samsung: use __devinit section for init code   Thierry Reding
• [PATCH 11/13] ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros   Paul Walmsley
• [PATCH 11/15] ARM: OMAP2+: gpmc: nand register helper bch update   Afzal Mohammed
• [PATCH 11/15] pinctrl: samsung: Use one GPIO chip per pin bank   Tomasz Figa
• [PATCH 11/16] ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2   Tony Lindgren
• [PATCH 11/16] pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops   Arnd Bergmann
• [PATCH 11/16] pinctrl: samsung: Use one GPIO chip per pin bank   Tomasz Figa
• [PATCH 11/16] pinctrl: samsung: Use one GPIO chip per pin bank   Linus Walleij
• [PATCH 11/16] pinctrl: samsung: Use one GPIO chip per pin bank   Tomasz Figa
• [PATCH 11/25] ARM: cns3xxx: use ehci platform driver   Florian Fainelli
• [PATCH 12/11] ARM: OMAP: Fix relative includes for fpga.h   Tony Lindgren
• [PATCH 12/12] ARM: mach-shmobile: Use DT_MACHINE for mackerel   Simon Horman
• [PATCH 12/12] ARM: mach-shmobile: Use DT_MACHINE for mackerel   Thomas Petazzoni
• [PATCH 12/12] ARM: mach-shmobile: Use DT_MACHINE for mackerel   Simon Horman
• [PATCH 12/12] ARM: mach-shmobile: Use DT_MACHINE for mackerel   Thomas Petazzoni
• [PATCH 12/13] ARM: OMAP2+: hwmod: call to _omap4_disable_module() should use the SoC-specific call   Paul Walmsley
• [PATCH 12/15] mtd: nand: omap: handle gpmc bch[48]   Afzal Mohammed
• [PATCH 12/15] pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts   Tomasz Figa
• [PATCH 12/16] ARM: OMAP: Merge plat/multi.h into plat/cpu.h   Tony Lindgren
• [PATCH 12/16] pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts   Tomasz Figa
• [PATCH 12/16] video: mark nuc900fb_map_video_memory as __devinit   Arnd Bergmann
• [PATCH 12/17] ARM: iop13xx: mark iop13xx_scan_bus as __devinit   Arnd Bergmann
• [PATCH 12/17] ARM: iop13xx: mark iop13xx_scan_bus as __devinit   Greg KH
• [PATCH 12/19] i2c-nomadik: Register sub-devices when passed via Device Tree   Wolfram Sang
• [PATCH 13/11] ARM: OMAP2+: Fix relative includes for serial.h   Tony Lindgren
• [PATCH 13/13] ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]   Paul Walmsley
• [PATCH 13/15] ARM: OMAP2+: gpmc: remove exported nand functions   Afzal Mohammed
• [PATCH 13/15] pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT   Tomasz Figa
• [PATCH 13/16] ARM: be really quiet when building with 'make -s'   Arnd Bergmann
• [PATCH 13/16] ARM: be really quiet when building with 'make -s'   Nicolas Pitre
• [PATCH 13/16] ARM: OMAP: Split uncompress.h to mach-omap1 and mach-omap2   Tony Lindgren
• [PATCH 13/16] pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT   Tomasz Figa
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Dave Martin
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Jon Medhurst (Tixy)
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Dave Martin
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Russell King - ARM Linux
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Dave Martin
• [PATCH 14/15] KVM: ARM: Handle I/O aborts   Christoffer Dall
• [PATCH 14/15] mtd: nand: omap: gpmc header removal   Afzal Mohammed
• [PATCH 14/15] pinctrl: samsung: Add GPIO to IRQ translation   Tomasz Figa
• [PATCH 14/16] ARM: OMAP: Split plat/serial.h for omap1 and omap2+   Tony Lindgren
• [PATCH 14/16] ARM: pxa: armcore: fix PCI PIO warnings   Arnd Bergmann
• [PATCH 14/16] ARM: pxa: armcore: fix PCI PIO warnings   Igor Grinberg
• [PATCH 14/16] pinctrl: samsung: Parse offsets of particular registers from DT   Tomasz Figa
• [PATCH 14/24] USB: ohci: merge ohci_finish_controller_resume with ohci_resume   Florian Fainelli
• [PATCH 14/24] USB: ohci: merge ohci_finish_controller_resume with ohci_resume   Jingoo Han
• [PATCH 14/24] USB: ohci: merge ohci_finish_controller_resume with ohci_resume   Nicolas Ferre
• [PATCH 15/15] ARM: OMAP2+: gpmc: localize gpmc header   Afzal Mohammed
• [PATCH 15/15] Documentation: Update samsung-pinctrl device tree bindings documentation   Tomasz Figa
• [PATCH 15/16] ARM: OMAP: Move plat/omap-serial.h to linux/platform_data/serial-omap.h   Tony Lindgren
• [PATCH 15/16] pinctrl: samsung: Add GPIO to IRQ translation   Tomasz Figa
• [PATCH 15/16] spi/s3c64xx: use correct dma_transfer_direction type   Arnd Bergmann
• [PATCH 15/25] powerpc/fsl_msi: add a const qualifier   Tabi Timur-B04825
• [PATCH 15/32 v2] USB: ohci: merge ohci_finish_controller_resume with ohci_resume   Florian Fainelli
• [PATCH 15/32 v3] USB: ohci: merge ohci_finish_controller_resume with ohci_resume   Florian Fainelli
• [PATCH 16/16] ARM: OMAP: Make plat/omap-pm.h local to mach-omap2   Tony Lindgren
• [PATCH 16/16] ARM: OMAP: Make plat/omap-pm.h local to mach-omap2   Laurent Pinchart
• [PATCH 16/16] ARM: pass -marm to gcc by default for both C and assembler   Arnd Bergmann
• [PATCH 16/16] ARM: pass -marm to gcc by default for both C and assembler   Nicolas Pitre
• [PATCH 16/16] Documentation: Update samsung-pinctrl device tree bindings documentation   Tomasz Figa
• [PATCH 16/25] ARM: cns3xxx: use OHCI platform driver   Florian Fainelli
• [PATCH 17/24 v2] ARM: cns3xxx: use OHCI platform driver   Florian Fainelli
• [PATCH 17/24 v2] ARM: cns3xxx: use OHCI platform driver   Alan Stern
• [PATCH 18/32 v3] ARM: cns3xxx: use OHCI platform driver   Florian Fainelli
• [PATCH 18/32 v4] ARM: cns3xxx: use OHCI platform driver   Florian Fainelli
• [PATCH 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Fabio Estevam
• [PATCH 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Guennadi Liakhovetski
• [PATCH 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   javier Martin
• [PATCH 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Gaëtan Carlier
• [PATCH 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Fabio Estevam
• [PATCH 2/2] arm: Add ARM ERRATA 782773 workaround   Simon Horman
• [PATCH 2/2] ARM: Add functions to parse dt irq affinity   Mark Rutland
• [PATCH 2/2] ARM: bcm2835: enable GPIO/pinctrl   Stephen Warren
• [PATCH 2/2] ARM: bcm2835: Fix typo in the error message   Domenico Andreoli
• [PATCH 2/2] arm: bcm2835: properly use IOMEM() to define virtual address constants   Thomas Petazzoni
• [PATCH 2/2] arm: bcm2835: properly use IOMEM() to define virtual address constants   Stephen Warren
• [PATCH 2/2] ARM: config: make sure that platforms are ordered by option string   Russell King
• [PATCH 2/2] ARM: dts: cfa10049: Add spidev to drive the DAC on SSP3   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10049: Add spidev to drive the DAC on SSP3   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Maxime Ripard
• [PATCH 2/2] ARM: dts: mxs: add oled support for the cfa-10036   Maxime Ripard
• [PATCH 2/2] ARM: Exynos4: Register clocks via common clock framework   chander.kashyap at linaro.org
• [PATCH 2/2] ARM: Exynos4: Register clocks via common clock framework   Tomasz Figa
• [PATCH 2/2] ARM: Exynos4: Register clocks via common clock framework   Tomasz Figa
• [PATCH 2/2] ARM: Exynos4: Register clocks via common clock framework   Sylwester Nawrocki
• [PATCH 2/2] ARM: Exynos4: Register clocks via common clock framework   Thomas Abraham
• [PATCH 2/2] ARM: Exynos4: Register clocks via common clock framework   Thomas Abraham
• [PATCH 2/2] ARM: Exynos4: Register clocks via common clock framework   Thomas Abraham
• [PATCH 2/2] ARM: Exynos4: Register clocks via common clock framework   Tomasz Figa
• [PATCH 2/2] ARM: Exynos5250: Enabling ohci-exynos driver   Vivek Gautam
• [PATCH 2/2] ARM: Exynos5250: Enabling ohci-exynos driver   Jingoo Han
• [PATCH 2/2] ARM: Exynos5250: Enabling ohci-exynos driver   Vivek Gautam
• [PATCH 2/2] ARM: integrator: get rid of preallocated irq descriptors   Linus Walleij
• [PATCH 2/2] ARM: kirkwood: use gpio-fan DT binding on lsxl   Michael Walle
• [PATCH 2/2] ARM: kirkwood: use gpio-fan DT binding on lsxl   Andrew Lunn
• [PATCH 2/2] ARM: kirkwood: use gpio-fan DT binding on lsxl   Michael Walle
• [PATCH 2/2] ARM: kirkwood: use gpio-fan DT binding on lsxl   Andrew Lunn
• [PATCH 2/2] ARM: kirkwood: use gpio-fan DT binding on lsxl   Jason Cooper
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Roland Stigge
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Sascha Hauer
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Roland Stigge
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Marc Kleine-Budde
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Roland Stigge
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Roland Stigge
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Marc Kleine-Budde
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Sascha Hauer
• [PATCH 2/2] ARM: mach-imx: CAN clock fix for i.MX53   Roland Stigge
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Yehuda Yitschak
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Andrew Lunn
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Arnd Bergmann
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Arnd Bergmann
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: Add hardware I/O Coherency support   Arnd Bergmann
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Andrew Lunn
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Jason Cooper
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Jason Cooper
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Rob Herring
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Rob Herring
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Rob Herring
• [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update   Gregory CLEMENT
• [PATCH 2/2] ARM: mx27_3ds: Add VPU support   Fabio Estevam
• [PATCH 2/2] ARM: OMAP2+: Add device-tree support for 32kHz counter   Jon Hunter
• [PATCH 2/2] ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals.   Tony Lindgren
• [PATCH 2/2] ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Tony Lindgren
• [PATCH 2/2] ARM: OMAP: omap_device: Correct resource handling for DT boot   Peter Ujfalusi
• [PATCH 2/2] ARM: OMAP: omap_device: Correct resource handling for DT boot   Péter Ujfalusi
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Kevin Hilman
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   jean.pihet at newoldbits.com
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Kevin Hilman
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   jean.pihet at newoldbits.com
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   Jean Pihet
• [PATCH 2/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data   jean.pihet at newoldbits.com
• [PATCH 2/2] ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2   Tony Lindgren
• [PATCH 2/2] ARM: plat-nomadik: Use apb_pclock in mtu driver   Ulf Hansson
• [PATCH 2/2] ARM: shmobile: armadillo800eva: enable L2X0 cache on defconfig   Simon Horman
• [PATCH 2/2] ARM: shmobile: r8a7779: use __iomem pointers for MMIO   Simon Horman
• [PATCH 2/2] ARM: SMP_TWD: use clk_prepare_enable()   Linus Walleij
• [PATCH 2/2] ARM: SMP_TWD: use clk_prepare_enable()   Ulf Hansson
• [PATCH 2/2] ARM: tegra: add tegra_timer clock   Sivaram Nair
• [PATCH 2/2] ARM: tegra: common: using OF api for L2 cache init   Joseph Lo
• [PATCH 2/2] ARM: tegra: move irammap.h to mach-tegra   Stephen Warren
• [PATCH 2/2] ARM: tegra: move irammap.h to mach-tegra   Stephen Warren
• [PATCH 2/2] ARM: tegra: remove "Tegra board type" comment from Kconfig   Stephen Warren
• [PATCH 2/2] ARM: tegra: T30 speedo-based identification   Danny Huang
• [PATCH 2/2] ARM: tegra: T30 speedo-based identification   Stephen Warren
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Laura Abbott
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Russell King - ARM Linux
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Dave Martin
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Colin Cross
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Dave Martin
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Russell King - ARM Linux
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Dave Martin
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Colin Cross
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Colin Cross
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Dave Martin
• [PATCH 2/2] ASoC: atmel-ssc: use module_platform_driver macro   Bo Shen
• [PATCH 2/2] ASoC: atmel-ssc: use module_platform_driver macro   Nicolas Ferre
• [PATCH 2/2] ASoC: atmel-ssc: use module_platform_driver macro   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ASoC: atmel-ssc: use module_platform_driver macro   Bo Shen
• [PATCH 2/2] ASoC: atmel-ssc: use module_platform_driver macro   Russell King - ARM Linux
• [PATCH 2/2] ASoC: atmel-ssc: use module_platform_driver macro   Fabio Porcedda
• [PATCH 2/2] ASoC: imx-ssi: Adopt 'per' and 'ipg' clocks   Fabio Estevam
• [PATCH 2/2] ASoC: Ux500: Control apb clock   Ulf Hansson
• [PATCH 2/2] ASoC: Ux500: Control apb clock   Linus Walleij
• [PATCH 2/2] ASoC: Ux500: Control apb clock   Mark Brown
• [PATCH 2/2] ASoC: Ux500: Control apb clock   Ulf Hansson
• [PATCH 2/2] ASoC: Ux500: Fixup compile error   Ulf Hansson
• [PATCH 2/2] ASoC: Ux500: Fixup compile error   Lee Jones
• [PATCH 2/2] ASoC: ux500_msp_i2s: Fix devm_* and return code merge error   Lee Jones
• [PATCH 2/2] ASoC: ux500_msp_i2s: Fix devm_* and return code merge error   Ulf Hansson
• [PATCH 2/2] ASoC: ux500_msp_i2s: Fix devm_* and return code merge error   Mark Brown
• [PATCH 2/2] ASoC: ux500_msp_i2s: Fix devm_* and return code merge error   Ulf Hansson
• [PATCH 2/2] clk: ux500: Register nomadik keypad clock lookups for u8500   Ulf Hansson
• [PATCH 2/2] clk: vt8500: Remove dependancy on pmc_base   Tony Prisk
• [PATCH 2/2] cpufreq: governors: remove redundant code   Viresh Kumar
• [PATCH 2/2] cpufreq: governors: remove redundant code   Viresh Kumar
• [PATCH 2/2] cpufreq: governors: remove redundant code   Viresh Kumar
• [PATCH 2/2] cpufreq: governors: remove redundant code   Rafael J. Wysocki
• [PATCH 2/2] cpufreq: governors: remove redundant code   Rafael J. Wysocki
• [PATCH 2/2] cpufreq: governors: remove redundant code   Viresh Kumar
• [PATCH 2/2] cpufreq: governors: remove redundant code   Rafael J. Wysocki
• [PATCH 2/2] cpufreq: governors: remove redundant code   Viresh Kumar
• [PATCH 2/2] Documentation: Describe Device Tree bindings for GPIO Regulator driver   Lee Jones
• [PATCH 2/2] Documentation: Describe Device Tree bindings for GPIO Regulator driver   Arnd Bergmann
• [PATCH 2/2] Documentation: Describe Device Tree bindings for GPIO Regulator driver   Lee Jones
• [PATCH 2/2] Documentation: Describe Device Tree bindings for GPIO Regulator driver   Mark Brown
• [PATCH 2/2] Documentation: Describe Device Tree bindings for GPIO Regulator driver   Lee Jones
• [PATCH 2/2] gpio: samsung: Fix input mode setting function for GPIO int   Kukjin Kim
• [PATCH 2/2] i2c: omap: make reset a seperate function   Shubhrajyoti D
• [PATCH 2/2] i2c: omap: make reset a seperate function   Felipe Balbi
• [PATCH 2/2] i2c: omap: make reset a seperate function   Shubhrajyoti
• [PATCH 2/2] input: gpio-keys: Add runtime support   Lee Jones
• [PATCH 2/2] input: gpio-keys: Add runtime support   Shubhrajyoti Datta
• [PATCH 2/2] input: gpio-keys: Add runtime support   Lee Jones
• [PATCH 2/2] input: gpio-keys: Add runtime support   Linus Walleij
• [PATCH 2/2] input: gpio-keys: Add runtime support   Lee Jones
• [PATCH 2/2] input: gpio-keys: Add runtime support   Linus Walleij
• [PATCH 2/2] input: gpio-keys: Add runtime support   Lee Jones
• [PATCH 2/2] input: gpio-keys: Add runtime support   Dmitry Torokhov
• [PATCH 2/2] input: gpio-keys: Add runtime support   Lee Jones
• [PATCH 2/2] input: gpio_keys: add pinctrl consumer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] mailbox: OMAP: introduce mailbox framework   Omar Ramirez Luna
• [PATCH 2/2] MAINTAINERS: add pinctrl atmel at91 entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] MAINTAINERS: add pinctrl atmel at91 entry   Linus Walleij
• [PATCH 2/2] MAINTAINERS: add pinctrl atmel at91 entry   Nicolas Ferre
• [PATCH 2/2] mmc: mmci: Make use of new DT capability parsing function   Lee Jones
• [PATCH 2/2] mmc: mmci: Switching off HWFC for SDIO depends on MCLK   Ulf Hansson
• [PATCH 2/2] mmc: sdhci: Defer probe if regulator_get fails   Pavan Kunapuli
• [PATCH 2/2] mmc: sdhci: Defer probe if regulator_get fails   Lucas Stach
• [PATCH 2/2] mmc: sdhci: Defer probe if regulator_get fails   Pavan Kunapuli
• [PATCH 2/2] mmc: sdhci: Defer probe if regulator_get fails   Philip Rakity
• [PATCH 2/2] mmc: sdhci: Defer probe if regulator_get fails   Russell King - ARM Linux
• [PATCH 2/2] mmc: sdhci: Defer probe if regulator_get fails   Stephen Warren
• [PATCH 2/2] mmc: sdhci: Defer probe if regulator_get fails   Mark Brown
• [PATCH 2/2] mtd: delete nomadik_nand driver   Linus Walleij
• [PATCH 2/2] mtd: delete nomadik_nand driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] mtd: sh_flctl: Add device tree support   Bastian Hecht
• [PATCH 2/2] mtd: sh_flctl: Add device tree support   Arnd Bergmann
• [PATCH 2/2] mtd: sh_flctl: Add device tree support   Guennadi Liakhovetski
• [PATCH 2/2] mtd: sh_flctl: Add device tree support   Arnd Bergmann
• [PATCH 2/2] mtd: sh_flctl: Add device tree support   Bastian Hecht
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Ulf Hansson
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Ulf Hansson
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Mark Brown
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Russell King - ARM Linux
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Mark Brown
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Russell King - ARM Linux
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Russell King - ARM Linux
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Mark Brown
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Linus Walleij
• [PATCH 2/2] Revert "spi/pl022: enable runtime PM"   Mark Brown
• [PATCH 2/2] rtc-imxdi: Add devicetree support   Roland Stigge
• [PATCH 2/2] rtc-imxdi: Add devicetree support   Sascha Hauer
• [PATCH 2/2] spi: mxs: Terminate DMA in case of DMA timeout   Marek Vasut
• [PATCH 2/2] USB: doc: Binding document for ehci-platform driver   Tony Prisk
• [PATCH 2/3] ARM: assabet: fix bogus warning in get_assabet_scr (again)   Arnd Bergmann
• [PATCH 2/3] arm: bcm2835: convert to the irqchip infrastructure   Thomas Petazzoni
• [PATCH 2/3] arm: bcm2835: convert to the irqchip infrastructure   Stephen Warren
• [PATCH 2/3] arm: bcm2835: convert to the irqchip infrastructure   Thomas Petazzoni
• [PATCH 2/3] ARM: dts: Correcting size of memory defined for omap5   Lokesh Vutla
• [PATCH 2/3] ARM: dts: Correcting size of memory defined for omap5   Benoit Cousson
• [PATCH 2/3] ARM: Kirkwood: Fix sparse warnings.   Andrew Lunn
• [PATCH 2/3] ARM: LPC32xx: Relocate calls to irq_set_chained_handler()   Roland Stigge
• [PATCH 2/3] ARM: mvebu: Add support I2C for OpenBlockS AX3   Nobuhiro Iwamatsu
• [PATCH 2/3] ARM: OMAP1: fix build breakage introduced by commit 25c7d49ed48b4843da7dea56a81ae7f620211ee0   Paul Walmsley
• [PATCH 2/3] ARM: OMAP4: add _dev_attr_ to ocp2scp for representing usb_phy   Kishon Vijay Abraham I
• [PATCH 2/3] ARM: shmobile: armadillo800eva: enable L2X0 cache on defconfig   Simon Horman
• [PATCH 2/3] ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode   Bastian Hecht
• [PATCH 2/3] ARM: tegra: enhance timer.c to get IO address from device tree   Stephen Warren
• [PATCH 2/3] ARM: tegra: make debug-macro.S work standalone   Stephen Warren
• [PATCH 2/3] ARM i.MX25 clk: Fix nfc_ipg_per parent   Sascha Hauer
• [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Mark Brown
• [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Sekhar Nori
• [PATCH 2/3] clk: Fix documentation typos   Stephen Boyd
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   viresh kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Andy Shevchenko
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Andy Shevchenko
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   viresh kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Andy Shevchenko
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Andy Shevchenko
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Andy Shevchenko
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Shevchenko, Andriy
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Shevchenko, Andriy
• [PATCH 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH 2/3] dmaengine: sirf: fix a typo in moving running dma_desc to active queue   Vinod Koul
• [PATCH 2/3] i2c: omap: Remove the redundant fifo clear   Shubhrajyoti D
• [PATCH 2/3] irqchip: Move ARM VIC to drivers/irqchip   Rob Herring
• [PATCH 2/3] irqchip: Move ARM VIC to drivers/irqchip   Stephen Warren
• [PATCH 2/3] pinctrl/coh901: convert to use managed resources   Linus Walleij
• [PATCH 2/3] pinctrl: mvebu: remove useless include   Thomas Petazzoni
• [PATCH 2/3] pinctrl: mvebu: remove useless include   Linus Walleij
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Arnd Bergmann
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Arnd Bergmann
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Russell King - ARM Linux
• [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH 2/3] RTC: omap-rtc: enable pm_runtime   Daniel Mack
• [PATCH 2/3] RTC: omap-rtc: enable pm_runtime   Vaibhav Hiremath
• [PATCH 2/3] RTC: omap-rtc: enable pm_runtime   Daniel Mack
• [PATCH 2/3] RTC: omap-rtc: enable pm_runtime   Hiremath, Vaibhav
• [PATCH 2/3] RTC: omap-rtc: enable pm_runtime   Mohammed, Afzal
• [PATCH 2/3] RTC: omap-rtc: enable pm_runtime   Daniel Mack
• [PATCH 2/3] RTC: omap-rtc: enable pm_runtime   Hiremath, Vaibhav
• [PATCH 2/3] serial: i.MX: Make console support non optional   Sascha Hauer
• [PATCH 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH 2/3] serial: mxs-auart: add the DMA support for mx28   Shawn Guo
• [PATCH 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH 2/3] serial: omap: Remove the default setting of special character   Shubhrajyoti D
• [PATCH 2/3] spi: spidev: Add Rohm DH2228FV DAC compatible string   Maxime Ripard
• [PATCH 2/4] ARM/dts: omap5: Update I2C with address space and interrupts   Sebastien Guiriec
• [PATCH 2/4] ARM/dts: omap5: Update I2C with address space and interrupts   Shubhrajyoti Datta
• [PATCH 2/4] arm64: Fix the update_vsyscall() prototype   Catalin Marinas
• [PATCH 2/4] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 2/4] ARM: AT91: Add usart/tc DT clock lookup to AT91RM9200   Joachim Eastwood
• [PATCH 2/4] ARM: AT91: Add usart/tc DT clock lookup to AT91RM9200   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] ARM: dts: imx6q: Add ENET PTP clock pin and clock source   Frank Li
• [PATCH 2/4] ARM: EXYNOS: Kconfig: Sort out dependencies between options   Tomasz Figa
• [PATCH 2/4] ARM: EXYNOS: Kconfig: Sort out dependencies between options   Kukjin Kim
• [PATCH 2/4] ARM: EXYNOS: Kconfig: Sort out dependencies between options   Tomasz Figa
• [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC   Bartlomiej Zolnierkiewicz
• [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC   Kukjin Kim
• [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC   Bartlomiej Zolnierkiewicz
• [PATCH 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Rob Herring
• [PATCH 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH 2/4] ARM: OMAP2+: Make some definitions local   Tony Lindgren
• [PATCH 2/4] ARM: OMAP2+: onenand: generic timing calculation   Afzal Mohammed
• [PATCH 2/4] ARM: OMAP: DMA: Move plat/dma hearder to platform_data/dma-omap   Vutla, Lokesh
• [PATCH 2/4] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Daniel Mack
• [PATCH 2/4] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Paul Walmsley
• [PATCH 2/4] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Paul Walmsley
• [PATCH 2/4] ARM: shmobile: Remove SH7367 support   Nobuhiro Iwamatsu
• [PATCH 2/4] ARM: shmobile: Remove SH7367 support   Simon Horman
• [PATCH 2/4] cpufreq: OMAP: remove unused <plat/omap-pm.h>   Kevin Hilman
• [PATCH 2/4] gpio: samsung: Skip registration if pinctrl driver is present on Exynos4x12   Tomasz Figa
• [PATCH 2/4] gpio: samsung: Skip registration if pinctrl driver is present on Exynos4x12   Linus Walleij
• [PATCH 2/4] mfd: ab8500: add devicetree support for Btemp   Rajanikanth H.V
• [PATCH 2/4] mfd: ab8500: add devicetree support for btemp   Rajanikanth H.V
• [PATCH 2/4] mfd: ab8500: add devicetree support for btemp   Francesco Lavra
• [PATCH 2/4] mfd: ab8500: add devicetree support for btemp   Rajanikanth H.V
• [PATCH 2/4] mtd: devices: elm: Add support for ELM error correction   Philip, Avinash
• [PATCH 2/4] mtd: devices: elm: Add support for ELM error correction   Peter Meerwald
• [PATCH 2/4] mtd: devices: elm: Add support for ELM error correction   Philip, Avinash
• [PATCH 2/4] mtd: devices: elm: Add support for ELM error correction   Peter Korsgaard
• [PATCH 2/4] mtd: devices: elm: Add support for ELM error correction   Philip, Avinash
• [PATCH 2/4] net: cpsw: Add parent<->child relation support between cpsw and mdio   Vaibhav Hiremath
• [PATCH 2/4] net: cpsw: Add parent<->child relation support between cpsw and mdio   Peter Korsgaard
• [PATCH 2/4] net: mvneta: update MAINTAINERS file for the mvneta maintainers   Thomas Petazzoni
• [PATCH 2/4] net: mvneta: update MAINTAINERS file for the mvneta maintainers   Thomas Petazzoni
• [PATCH 2/4] vt8500: Remove arm/boot/compressed/head-vt8500.S   Tony Prisk
• [PATCH 2/4] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH 2/5] ARM: AT91: Add DT support to AT91RM9200 System Timer   Joachim Eastwood
• [PATCH 2/5] ARM: at91: atmel-ssc: add device tree support   Bo Shen
• [PATCH 2/5] ARM: at91: atmel-ssc: add device tree support   Nicolas Ferre
• [PATCH 2/5] ARM: Kirkwood: Allow use of MVEBU GPIO driver.   Andrew Lunn
• [PATCH 2/5] ARM: Kirkwood: Allow use of MVEBU GPIO driver.   Thomas Petazzoni
• [PATCH 2/5] arm: mvebu: Added initial support for power managmement service unit   Gregory CLEMENT
• [PATCH 2/5] ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files   Paul Walmsley
• [PATCH 2/5] ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files   Russ Dill
• [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Tony Lindgren
• [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Koen Kooi
• [PATCH 2/5] ARM: omap: introduce .get_voltage callback   Mike Turquette
• [PATCH 2/5] ARM: plat-nomadik: move NMK_GPIO_PER_CHIP into gpio-nomadik.h   Linus Walleij
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Marek Vasut
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Marek Vasut
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Daniel Mack
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Daniel Mack
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Marek Vasut
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Daniel Mack
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Daniel Mack
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Daniel Mack
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Daniel Mack
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Daniel Mack
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Haojian Zhuang
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Haojian Zhuang
• [PATCH 2/5] ARM: tegra: dts: add slink controller dt entry   Laxman Dewangan
• [PATCH 2/5] ARM: tegra: dts: add slink controller dt entry   Stephen Warren
• [PATCH 2/5] ARM: tegra: dts: add slink controller dt entry   Laxman Dewangan
• [PATCH 2/5] ARM: tegra: dts: add slink controller dt entry   Stephen Warren
• [PATCH 2/5] ARM: tegra: dts: add slink controller dt entry   Vinod Koul
• [PATCH 2/5] clk: ux500: Register ssp clock lookups for u8500   Ulf Hansson
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Roger Quadros
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Benoit Cousson
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Tony Lindgren
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Paul Walmsley
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Benoit Cousson
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Benoit Cousson
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Tony Lindgren
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Roger Quadros
• [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   kishon
• [PATCH 2/5] i2c: i2c-sh_mobile: optimize ICCH/ICCL values according to I2C bus speed   Shinya Kuribayashi
• [PATCH 2/5] net/at91_ether: select MACB in Kconfig   Joachim Eastwood
• [PATCH 2/5] net/at91_ether: select MACB in Kconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] net/at91_ether: select MACB in Kconfig   Joachim Eastwood
• [PATCH 2/5 v6] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH 2/5 v6] gpio: Add sysfs support to block GPIO API   Greg KH
• [PATCH 2/6] ARM: bcm476x: Add system timer   Domenico Andreoli
• [PATCH 2/6] ARM: bcm476x: Add system timer   Florian Fainelli
• [PATCH 2/6] ARM: bcm476x: Add system timer   Stephen Warren
• [PATCH 2/6] ARM: bcm476x: Add system timer   Domenico Andreoli
• [PATCH 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Vasanth Ananthan
• [PATCH 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Olof Johansson
• [PATCH 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Vasanth Ananthan
• [PATCH 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Vasanth Ananthan
• [PATCH 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Olof Johansson
• [PATCH 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Vasanth Ananthan
• [PATCH 2/6] ARM: highbank: enable coherent DMA for xgmac in dts   Rob Herring
• [PATCH 2/6] ARM: OMAP2+: Move iopgtable header to drivers/iommu/   Tony Lindgren
• [PATCH 2/6] ARM: OMAP2+: Move iopgtable header to drivers/iommu/   Tony Lindgren
• [PATCH 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [PATCH 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [PATCH 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [PATCH 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [PATCH 2/6] ARM: ux500: Add skeleton DTS file for the u9540   Lee Jones
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Lee Jones
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Linus Walleij
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Lee Jones
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Linus Walleij
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Lee Jones
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Ulf Hansson
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Lee Jones
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Linus Walleij
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Linus Walleij
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Linus Walleij
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Lee Jones
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Linus Walleij
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Lee Jones
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Linus Walleij
• [PATCH 2/6] platform: pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] Serial: AT91: Distinguish PDC from DMA   Elen Song
• [PATCH 2/7] ARM: clps711x: p720t: remove missing #include   Alexander Shiyan
• [PATCH 2/7] ARM: hw_breakpoint: fix monitor mode detection with v7.1   Will Deacon
• [PATCH 2/7] ARM: hw_breakpoint: fix monitor mode detection with v7.1   Stephen Boyd
• [PATCH 2/7] ARM: OMAP2+: CM: prepare for use of cm_ll_data function pointers   Paul Walmsley
• [PATCH 2/7] ARM: OMAP2xxx: hwmod: Add DMA information for SHAM module   Mark A. Greer
• [PATCH 2/7] ARM: OMAP2xxx: hwmod: Add DMA information for SHAM module   Paul Walmsley
• [PATCH 2/7] ARM: OMAP2xxx: hwmod: Add DMA information for SHAM module   Mark A. Greer
• [PATCH 2/7] ARM: OMAP2xxx: hwmod: Add DMA information for SHAM module   Paul Walmsley
• [PATCH 2/7] ARM: OMAP2xxx: hwmod: Add DMA information for SHAM module   Mark A. Greer
• [PATCH 2/7] ARM: omap: add ABB PRM_IRQSTATUS handlers   Mike Turquette
• [PATCH 2/7] ARM: perf: allocate CPU PMU dynamically at probe time   Will Deacon
• [PATCH 2/7] ARM: tegra: cpuidle: add LP2 resume function   Joseph Lo
• [PATCH 2/7] ARM: tegra: cpuidle: add LP2 resume function   Stephen Warren
• [PATCH 2/7] ARM: tegra: cpuidle: add LP2 resume function   Joseph Lo
• [PATCH 2/7] ARM: ux500: Add SDI (MMC) support to the HREF Device Tree   Lee Jones
• [PATCH 2/7] clk: exynos5440: add common clock support for Samsung EXYNOS5440   Kukjin Kim
• [PATCH 2/8] ARM: at91: at91sam9g10: fix SOC type detection   Nicolas Ferre
• [PATCH 2/8] ARM: plat-nomadik: pass IRQ to timer driver   Linus Walleij
• [PATCH 2/8] ARM: S3C64XX: Update hookup for Arizona class devices   Mark Brown
• [PATCH 2/8] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345   Simon Horman
• [PATCH 2/8] ARM: ux500: Rename references to the ccu9540 dev board accordingly   Lee Jones
• [PATCH 2/8] ARM: zynq: move ttc timer code to drivers/clocksource   Josh Cartwright
• [PATCH 2/8] i2c: omap: reorder exit path of omap_i2c_xfer_msg()   Felipe Balbi
• [PATCH 2/8] i2c: omap: reorder exit path of omap_i2c_xfer_msg()   Shubhrajyoti Datta
• [PATCH 2/8] i2c: omap: reorder exit path of omap_i2c_xfer_msg()   Felipe Balbi
• [PATCH 2/8] mfd: db8500: Provide cpufreq table as platform data   Ulf Hansson
• [PATCH 2/9] ARM: export set_irq_flags   Arnd Bergmann
• [PATCH 2/9] ARM: export set_irq_flags   Thomas Gleixner
• [PATCH 2/9] ARM: export set_irq_flags   Linus Walleij
• [PATCH 2/9] ARM: Kirkwood: Convert iConnect to pinctrl.   Andrew Lunn
• [PATCH 2/9] ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs   Peter Ujfalusi
• [PATCH 2/9] pinctrl: SPEAr3xx: correct register space to configure pwm   Viresh Kumar
• [PATCH 2/9] uprobes: check for single step support   Rabin Vincent
• [PATCH 2/9] uprobes: check for single step support   Srikar Dronamraju
• [PATCH 2/9] uprobes: check for single step support   Oleg Nesterov
• [PATCH 28/34] media: mx2_camera: remove mach/hardware.h inclusion   Shawn Guo
• [PATCH 3.6.0- 0/6] ARM: use module_platform_driver macro   Srinivas KANDAGATLA
• [PATCH 3.6.0- 0/6] ARM: use module_platform_driver macro   Paul Walmsley
• [PATCH 3.6.0- 1/6] ARM/omap1: use module_platform_driver macro   Srinivas KANDAGATLA
• [PATCH 3.6.0- 2/6] ARM/omap2: use module_platform_driver macro   Srinivas KANDAGATLA
• [PATCH 3.6.0- 3/6] ARM/pxa: use module_platform_driver macro   Srinivas KANDAGATLA
• [PATCH 3.6.0- 3/6] ARM/pxa: use module_platform_driver macro   Igor Grinberg
• [PATCH 3.6.0- 4/6] ARM/pxa: use module_platform_driver macro   Srinivas KANDAGATLA
• [PATCH 3.6.0- 5/6] ARM/omap: use module_platform_driver macro   Srinivas KANDAGATLA
• [PATCH 3.6.0- 6/6] omap_rng: use module_platform_driver macro   Srinivas KANDAGATLA
• [PATCH 3/3] ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS   Maxime Ripard
• [PATCH 3/3] ARM: dts: EMIF and LPDDR2 device tree data for OMAP5 boards   Lokesh Vutla
• [PATCH 3/3] ARM: dts: EMIF and LPDDR2 device tree data for OMAP5 boards   Benoit Cousson
• [PATCH 3/3] ARM: dts: EMIF and LPDDR2 device tree data for OMAP5 boards   Lokesh Vutla
• [PATCH 3/3] ARM: dts: EMIF and LPDDR2 device tree data for OMAP5 boards   Benoit Cousson
• [PATCH 3/3] ARM: dts: EMIF and LPDDR2 device tree data for OMAP5 boards   Santosh Shilimkar
• [PATCH 3/3] ARM: dts: enable dma support for auart0 in mx28   Huang Shijie
• [PATCH 3/3] ARM: highbank: use common irqchip_init   Rob Herring
• [PATCH 3/3] ARM: imx_v6_v7_defconfig: Add DA9052 regulator support   Sascha Hauer
• [PATCH 3/3] ARM: integrator: use __iomem pointers for MMIO, part 2   Arnd Bergmann
• [PATCH 3/3] ARM: integrator: use __iomem pointers for MMIO, part 2   Linus Walleij
• [PATCH 3/3] ARM: Kirkwood: checkpatch cleanups   Andrew Lunn
• [PATCH 3/3] ARM: Kirkwood: checkpatch cleanups   Andrew Lunn
• [PATCH 3/3] ARM: LPC32xx: Cleanup irq.c   Roland Stigge
• [PATCH 3/3] ARM: mvebu: Add support RTC for OpenBlockS AX3   Nobuhiro Iwamatsu
• [PATCH 3/3] arm: mvebu: move irq controller driver to drivers/irqchip   Thomas Petazzoni
• [PATCH 3/3] arm: mvebu: move irq controller driver to drivers/irqchip   Stephen Warren
• [PATCH 3/3] ARM: OMAP1: fix sparse warning added by commit 4c98dc6b8ef2f73bdbfa78186db9a76507ba9ea3   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Kishon Vijay Abraham I
• [PATCH 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Sergei Shtylyov
• [PATCH 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   kishon
• [PATCH 3/3] ARM: shmobile: leave CONFIG_INOTIFY_USER enabled by default   Simon Horman
• [PATCH 3/3] ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode   Bastian Hecht
• [PATCH 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH 3/3] ARM: tegra: move debug-macro.S to include/debug   Stephen Warren
• [PATCH 3/3] ARM: tegra: move timer.c to drivers/clocksource/   Stephen Warren
• [PATCH 3/3] ARM i.MX25: Fix PWM per clock lookups   Sascha Hauer
• [PATCH 3/3] clk: Don't return negative numbers for unsigned values with !clk   Stephen Boyd
• [PATCH 3/3] dmaengine: sirf: enable the driver support new SiRFmarco SoC   Vinod Koul
• [PATCH 3/3] dmaengine: sirf: enable the driver support new SiRFmarco SoC   Barry Song
• [PATCH 3/3] dmaengine: sirf: enable the driver support new SiRFmarco SoC   Vinod Koul
• [PATCH 3/3] dmaengine: sirf: enable the driver support new SiRFmarco SoC   Barry Song
• [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm   Tony Prisk
• [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm   Thierry Reding
• [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm   Tony Prisk
• [PATCH 3/3] i2c: omap: Remove Address as slave wakeup   Shubhrajyoti D
• [PATCH 3/3] pinctrl/u300: use managed resources   Linus Walleij
• [PATCH 3/3] pinctrl: mvebu: move to its own directory   Thomas Petazzoni
• [PATCH 3/3] pinctrl: mvebu: move to its own directory   Linus Walleij
• [PATCH 3/3] RTC: omap-rtc: add DT bindings   Daniel Mack
• [PATCH 3/3] serial: i.MX: evaluate linux,stdout-path property   Sascha Hauer
• [PATCH 3/3] serial: omap: Remove the hardcode serial_omap_console_ports array.   Shubhrajyoti D
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Sebastien Guiriec
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Sourav
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Benoit Cousson
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Benoit Cousson
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Sourav
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Felipe Balbi
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Benoit Cousson
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Sourav
• [PATCH 3/4] ARM/dts: omap5: Update UART with address space and interrupts   Sourav
• [PATCH 3/4] arm64: Ignore memory blocks below PHYS_OFFSET   Catalin Marinas
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Joachim Eastwood
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   ludovic.desroches
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Joachim Eastwood
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Joachim Eastwood
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Nicolas Ferre
• [PATCH 3/4] ARM: AT91: Add AT91RM9200 support to DT board   Nicolas Ferre
• [PATCH 3/4] ARM: dts: exynos4: add node for PL330 MDMA1 controller   Bartlomiej Zolnierkiewicz
• [PATCH 3/4] ARM: EXYNOS: Kconfig: Group EXYNOS{4212,4412} into EXYNOS4X12   Tomasz Figa
• [PATCH 3/4] ARM: EXYNOS: Kconfig: Group EXYNOS{4212,4412} into EXYNOS4X12   Kukjin Kim
• [PATCH 3/4] ARM: EXYNOS: Kconfig: Group EXYNOS{4212, 4412} into EXYNOS4X12   Tomasz Figa
• [PATCH 3/4] ARM: imx6q: Set enet tx reference clk from anatop to support 1588   Frank Li
• [PATCH 3/4] ARM: kirkwood: DT board setup for Network Space Lite v2   Simon Guinot
• [PATCH 3/4] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH 3/4] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH 3/4] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Nobuhiro Iwamatsu
• [PATCH 3/4] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH 3/4] ARM: OMAP2+: hwmod: add flag to prevent hwmod code from touching IP block during init   Paul Walmsley
• [PATCH 3/4] ARM: OMAP2+: Move iommu/iovmm headers to platform_data   Tony Lindgren
• [PATCH 3/4] ARM: OMAP2+: Move iommu/iovmm headers to platform_data   Tony Lindgren
• [PATCH 3/4] ARM: OMAP2+: Move iommu/iovmm headers to platform_data   Laurent Pinchart
• [PATCH 3/4] ARM: OMAP2+: Move iommu/iovmm headers to platform_data   Tony Lindgren
• [PATCH 3/4] ARM: OMAP2+: Move iommu/iovmm headers to platform_data   Tony Lindgren
• [PATCH 3/4] ARM: OMAP2+: smc91x: generic timing calculation   Afzal Mohammed
• [PATCH 3/4] ARM: OMAP2: gpmc: Add support for BCH ECC scheme   Philip, Avinash
• [PATCH 3/4] ARM: OMAP2: gpmc: Add support for BCH ECC scheme   Ivan Djelic
• [PATCH 3/4] ARM: OMAP2: gpmc: Add support for BCH ECC scheme   Philip, Avinash
• [PATCH 3/4] ARM: OMAP2: gpmc: Add support for BCH ECC scheme   Ivan Djelic
• [PATCH 3/4] ARM: OMAP2: gpmc: Add support for BCH ECC scheme   Peter Korsgaard
• [PATCH 3/4] ARM: OMAP2: gpmc: Add support for BCH ECC scheme   Philip, Avinash
• [PATCH 3/4] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module   Vaibhav Hiremath
• [PATCH 3/4] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module   Peter Korsgaard
• [PATCH 3/4] ARM: OMAP: gpmc: don't create devices from initcall on DT   Daniel Mack
• [PATCH 3/4] ARM: OMAP: Move omap_reserve() locally to mach-omap1/2   Vutla, Lokesh
• [PATCH 3/4] ARM: shmobile: Remove G4EVM machine support   Nobuhiro Iwamatsu
• [PATCH 3/4] ARM: shmobile: Remove G4EVM machine support   Simon Horman
• [PATCH 3/4] ARM: VIC: Add a couple of low-level FIQ management helpers   Anton Vorontsov
• [PATCH 3/4] cpufreq: OMAP: fix clock usage to be SoC independent, remove plat/ includes   Kevin Hilman
• [PATCH 3/4] mfd: ab8500: add devicetree support for charger   Rajanikanth H.V
• [PATCH 3/4] mfd: ab8500: add devicetree support for charger   Rajanikanth H.V
• [PATCH 3/4] mfd: ab8500: add devicetree support for charger   Francesco Lavra
• [PATCH 3/4] mfd: ab8500: add devicetree support for charger   Rajanikanth H.V
• [PATCH 3/4] pinctrl: samsung: Add support for Exynos4x12   Tomasz Figa
• [PATCH 3/4] pinctrl: samsung: Add support for Exynos4x12   Linus Walleij
• [PATCH 3/4] pinctrl: samsung: Add support for Exynos4x12   Kyungmin Park
• [PATCH 3/4] pinctrl: samsung: Add support for Exynos4x12   Tomasz Figa
• [PATCH 3/4] pinctrl: samsung: Add support for Exynos4x12   Kukjin Kim
• [PATCH 3/4] pinctrl: samsung: Add support for Exynos4x12   Linus Walleij
• [PATCH 3/4] vt8500: Fix header in mach-vt8500/timer.c   Tony Prisk
• [PATCH 3/4] zynq: remove use of CLKDEV_LOOKUP   Josh Cartwright
• [PATCH 3/5] ARM: AT91: Add usart/tc/pio DT clock lookup to AT91RM9200   Joachim Eastwood
• [PATCH 3/5] arm: mvebu: Added IPI support via doorbells   Gregory CLEMENT
• [PATCH 3/5] arm: mvebu: Added IPI support via doorbells   Andrew Lunn
• [PATCH 3/5] arm: mvebu: Added IPI support via doorbells   Gregory CLEMENT
• [PATCH 3/5] arm: mvebu: Added IPI support via doorbells   Andrew Lunn
• [PATCH 3/5] arm: mvebu: Added IPI support via doorbells   Gregory CLEMENT
• [PATCH 3/5] arm: mvebu: Added IPI support via doorbells   Thomas Petazzoni
• [PATCH 3/5] arm: mvebu: Added IPI support via doorbells   Andrew Lunn
• [PATCH 3/5] arm: mvebu: Added IPI support via doorbells   Thomas Petazzoni
• [PATCH 3/5] ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM   Paul Walmsley
• [PATCH 3/5] ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM   Rajendra Nayak
• [PATCH 3/5] ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM   Russ Dill
• [PATCH 3/5] ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM   Paul Walmsley
• [PATCH 3/5] ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM   Hiremath, Vaibhav
• [PATCH 3/5] ARM: omap: vc: .get_voltage callback   Mike Turquette
• [PATCH 3/5] ARM: omap: vc: .get_voltage callback   Kevin Hilman
• [PATCH 3/5] ARM: PXA: Zipit Z2: Fix oops in z2_power_off   Vasily Khoruzhick
• [PATCH 3/5] ARM: tegra: fix clock entry of slink controller   Laxman Dewangan
• [PATCH 3/5] ARM: tegra: fix clock entry of slink controller   Stephen Warren
• [PATCH 3/5] ARM: tegra: fix clock entry of slink controller   Laxman Dewangan
• [PATCH 3/5] ARM: tegra: fix clock entry of slink controller   Stephen Warren
• [PATCH 3/5] ASoC: atmel-ssc-dai: register 'platform' from DAIs   Bo Shen
• [PATCH 3/5] clk: ux500: Register msp clock lookups for u8500   Ulf Hansson
• [PATCH 3/5] i2c: i2c-sh_mobile: fix ICCH to avoid violation of the tHD;STA timing spec   Shinya Kuribayashi
• [PATCH 3/5] net/at91_ether: move eth addr quirk into csb337 board setup   Joachim Eastwood
• [PATCH 3/5] net/at91_ether: move eth addr quirk into csb337 board setup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] net/at91_ether: move eth addr quirk into csb337 board setup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] net/at91_ether: move eth addr quirk into csb337 board setup   Joachim Eastwood
• [PATCH 3/5] net/at91_ether: move eth addr quirk into csb337 board setup   Joachim Eastwood
• [PATCH 3/5] net: davinci_mdio: Fix type mistake in calling runtime-pm api   Richard Cochran
• [PATCH 3/5] net: davinci_mdio: Fix type mistake in calling runtime-pm api   Hiremath, Vaibhav
• [PATCH 3/5] pinctrl/nomadik: allow to support several ranges per GPIO bank   Linus Walleij
• [PATCH 3/5] pinctrl: dove: fix iomem and pdma clock   Andrew Lunn
• [PATCH 3/5] pinctrl: dove: fix iomem and pdma clock   Linus Walleij
• [PATCH 3/5] pinctrl: dove: fix iomem and pdma clock   Sebastian Hesselbarth
• [PATCH 3/5] pinctrl: dove: fix iomem and pdma clock   Jason Cooper
• [PATCH 3/5 v6] gpiolib: Fix default attributes for class   Roland Stigge
• [PATCH 3/6] ARM: bcm476x: Add sched clock   Domenico Andreoli
• [PATCH 3/6] ARM: bcm476x: Add sched clock   Stephen Warren
• [PATCH 3/6] ARM: dts: Add Calxeda ECX-2000 support   Rob Herring
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Mauro Carvalho Chehab
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Laurent Pinchart
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Laurent Pinchart
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Laurent Pinchart
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Laurent Pinchart
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Ohad Ben-Cohen
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Laurent Pinchart
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Ohad Ben-Cohen
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 3/6] ARM: OMAP: iommu: pm runtime save and restore context   Omar Ramirez Luna
• [PATCH 3/6] ARM: ux500: Add support for ST-Ericsson's u9540 SoC   Lee Jones
• [PATCH 3/6] ARM: ux500: Add support for ST-Ericsson's u9540 SoC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] ARM: ux500: Add support for ST-Ericsson's u9540 SoC   Lee Jones
• [PATCH 3/6] ARM: ux500: Add support for ST-Ericsson's u9540 SoC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] ARM: ux500: Add support for ST-Ericsson's u9540 SoC   Lee Jones
• [PATCH 3/6] ARM: ux500: Add support for ST-Ericsson's u9540 SoC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE   Lee Jones
• [PATCH 3/6] DRIVERS: ATA: SATA PHY utility framework   Vasanth Ananthan
• [PATCH 3/6] DRIVERS: ATA: SATA PHY utility framework   Tomasz Figa
• [PATCH 3/6] DRIVERS: ATA: SATA PHY utility framework   Vasanth Ananthan
• [PATCH 3/6] Serial: AT91: Request tx dma channel   Elen Song
• [PATCH 3/6] tty: atmel_serial: switch pm ops   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] ARM: clps711x: rework IRQ sybsustem initialization   Alexander Shiyan
• [PATCH 3/7] ARM: hw_breakpoint: fix ordering of debug register reset sequence   Will Deacon
• [PATCH 3/7] ARM: hw_breakpoint: fix ordering of debug register reset sequence   Stephen Boyd
• [PATCH 3/7] ARM: OMAP1: create read_reset_sources() function (for initial use by watchdog)   Paul Walmsley
• [PATCH 3/7] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH 3/7] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod   Paul Walmsley
• [PATCH 3/7] ARM: omap: Adaptive Body-Bias structures & data   Mike Turquette
• [PATCH 3/7] ARM: perf: consistently use struct perf_event in arm_pmu functions   Will Deacon
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Joseph Lo
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Lorenzo Pieralisi
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Joseph Lo
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Lorenzo Pieralisi
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Joseph Lo
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Lorenzo Pieralisi
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Stephen Warren
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Joseph Lo
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Stephen Warren
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Joseph Lo
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Stephen Warren
• [PATCH 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Joseph Lo
• [PATCH 3/7] ARM: ux500: Correct Snowball's external SD/MMC slot's bus width   Lee Jones
• [PATCH 3/8] ARM: at91: fix external interrupts in non-DT case   Nicolas Ferre
• [PATCH 3/8] ARM: at91: fix external interrupts in non-DT case   ludovic.desroches
• [PATCH 3/8] ARM: plat-nomadik: use DIV_ROUND_CLOSEST()   Linus Walleij
• [PATCH 3/8] ARM: S3C64XX: Provide platform data for Tomatin/Balblair on Cragganmore   Mark Brown
• [PATCH 3/8] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2   Simon Horman
• [PATCH 3/8] ARM: ux500: Remove duplicate DT_MACHINE_START - make u8500 for generic   Lee Jones
• [PATCH 3/8] ARM: zynq: dts: add description of the second uart   Josh Cartwright
• [PATCH 3/8] cpufreq: db8500: Register as a platform driver   Ulf Hansson
• [PATCH 3/8] i2c: omap: fix error checking   Felipe Balbi
• [PATCH 3/8] i2c: omap: fix error checking   Michael Trimarchi
• [PATCH 3/8] i2c: omap: fix error checking   Felipe Balbi
• [PATCH 3/8] i2c: omap: fix error checking   Michael Trimarchi
• [PATCH 3/8] i2c: omap: fix error checking   Felipe Balbi
• [PATCH 3/9] ARM/dts: omap4-panda: Disable unused audio IPs   Peter Ujfalusi
• [PATCH 3/9] ARM: Fix another build warning in arch/arm/mm/alignment.c   Arnd Bergmann
• [PATCH 3/9] ARM: Kirkwood: Convert dnskw to pinctrl   Andrew Lunn
• [PATCH 3/9] ARM: Kirkwood: Convert dnskw to pinctrl   Jamie Lentin
• [PATCH 3/9] ARM: Kirkwood: Convert dnskw to pinctrl   Andrew Lunn
• [PATCH 3/9] ARM: Kirkwood: Convert dnskw to pinctrl   Jamie Lentin
• [PATCH 3/9] ARM: Kirkwood: Convert dnskw to pinctrl   Andrew Lunn
• [PATCH 3/9] ARM: Kirkwood: Convert dnskw to pinctrl   Jamie Lentin
• [PATCH 3/9] pinctrl: SPEAr320: Correct pad mux entries for rmii/smii   Viresh Kumar
• [PATCH 3/9] uprobes: allow ignoring of probe hits   Rabin Vincent
• [PATCH 3/9] uprobes: allow ignoring of probe hits   Oleg Nesterov
• [PATCH 3/9] uprobes: allow ignoring of probe hits   Rabin Vincent
• [PATCH 3/9] uprobes: allow ignoring of probe hits   Srikar Dronamraju
• [PATCH 3/9] uprobes: allow ignoring of probe hits   Oleg Nesterov
• [PATCH 3/9] uprobes: allow ignoring of probe hits   Rabin Vincent
• [PATCH 3/9] uprobes: allow ignoring of probe hits   Oleg Nesterov
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Vaibhav Hiremath
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Peter Korsgaard
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Benoit Cousson
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Hiremath, Vaibhav
• [PATCH 4/4] ARM/dts: omap5: Update MMC with address space and interrupts   Sebastien Guiriec
• [PATCH 4/4] arm64: No need to set the x0-x2 registers in start_thread()   Catalin Marinas
• [PATCH 4/4] ARM: AT91: Add AT91RM9200 device tree   Joachim Eastwood
• [PATCH 4/4] ARM: dts: exynos4x12: Add nodes for pin controllers   Tomasz Figa
• [PATCH 4/4] ARM: dts: exynos4x12: Add nodes for pin controllers   Linus Walleij
• [PATCH 4/4] ARM: EXYNOS: Kconfig: Remove dependencies on particular SoCs from DT machines   Tomasz Figa
• [PATCH 4/4] ARM: EXYNOS: Kconfig: Remove dependencies on particular SoCs from DT machines   Kukjin Kim
• [PATCH 4/4] ARM: EXYNOS: Kconfig: Remove dependencies on particular SoCs from DT machines   Tomasz Figa
• [PATCH 4/4] ARM: kirkwood: DT board setup for Network Space Mini v2   Simon Guinot
• [PATCH 4/4] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH 4/4] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH 4/4] ARM: OMAP2+: Move iopgtable header to drivers/iommu/   Tony Lindgren
• [PATCH 4/4] ARM: OMAP2+: tusb6010: generic timing calculation   Afzal Mohammed
• [PATCH 4/4] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init   Paul Walmsley
• [PATCH 4/4] ARM: shmobile: Remove SH7377 support   Nobuhiro Iwamatsu
• [PATCH 4/4] ARM: shmobile: Remove SH7377 support   Simon Horman
• [PATCH 4/4] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH 4/4] cpufreq: OMAP: use get_cpu_device() instead of omap_device API   Kevin Hilman
• [PATCH 4/4] DMA: PL330: add device tree property for DMA_MEMCPY capability   Bartlomiej Zolnierkiewicz
• [PATCH 4/4] DMA: PL330: add device tree property for DMA_MEMCPY capability   Jassi Brar
• [PATCH 4/4] DMA: PL330: add device tree property for DMA_MEMCPY capability   Bartlomiej Zolnierkiewicz
• [PATCH 4/4] FEC: Add time stamping code and a PTP hardware clock   Frank Li
• [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg   Rajanikanth H.V
• [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg   Francesco Lavra
• [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg   Rajanikanth H.V
• [PATCH 4/4] mfd: ab8500: add devicetree support for charging algorithm   Rajanikanth H.V
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Philip, Avinash
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Ivan Djelic
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Philip, Avinash
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Philip, Avinash
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Ivan Djelic
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Philip, Avinash
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Ivan Djelic
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Philip, Avinash
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Ivan Djelic
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Philip, Avinash
• [PATCH 4/4] mtd: nand: omap2: Add data correction support   Tony Lindgren
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Tony Lindgren
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Afzal Mohammed
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Afzal Mohammed
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Afzal Mohammed
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND   Afzal Mohammed
• [PATCH 4/4] vt8500: Fix build warning when no framebuffer selected   Tony Prisk
• [PATCH 4/4] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH 4/5] ARM: AT91: Add AT91RM9200 DT board   Joachim Eastwood
• [PATCH 4/5] ARM: AT91: Add AT91RM9200 DT board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] ARM: AT91: Remove HAVE_NET_MACB   Joachim Eastwood
• [PATCH 4/5] ARM: Dove: Make use of pinctrl driver   Andrew Lunn
• [PATCH 4/5] ARM: Dove: Make use of pinctrl driver   Linus Walleij
• [PATCH 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH 4/5] ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files   Paul Walmsley
• [PATCH 4/5] ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files   Russ Dill
• [PATCH 4/5] ARM: omap: vp: .get_voltage callback   Mike Turquette
• [PATCH 4/5] ARM: PXA: Zipit Z2: Change active_state of power button   Vasily Khoruzhick
• [PATCH 4/5] ARM: PXA: Zipit Z2: Change active_state of power button   Marek Vasut
• [PATCH 4/5] ARM: PXA: Zipit Z2: Change active_state of power button   mark at engine12.com
• [PATCH 4/5] ARM: tegra: dts: cardhu: enable SLINK4   Laxman Dewangan
• [PATCH 4/5] ASoC: sam9g20_wm8731: convert to device tree support   Bo Shen
• [PATCH 4/5] ASoC: sam9g20_wm8731: convert to device tree support   Mark Brown
• [PATCH 4/5] ASoC: sam9g20_wm8731: convert to device tree support   Bo Shen
• [PATCH 4/5] clk: ux500: Update rtc clock lookup for u8500   Ulf Hansson
• [PATCH 4/5] i2c: i2c-sh_mobile: support I2C hardware block with a faster operating clock   Shinya Kuribayashi
• [PATCH 4/5] net: cpsw: Add parent<->child relation support between cpsw and mdio   Richard Cochran
• [PATCH 4/5] net: cpsw: Add parent<->child relation support between cpsw and mdio   Hiremath, Vaibhav
• [PATCH 4/5] pinctrl/nomadik: move the platform data header   Linus Walleij
• [PATCH 4/5 v6] gpio: Add device tree support to block GPIO API   Roland Stigge
• [PATCH 4/6] ARM: bcm476x: Add stub clock driver   Domenico Andreoli
• [PATCH 4/6] ARM: bcm476x: Add stub clock driver   Stephen Warren
• [PATCH 4/6] ARM: bcm476x: Add stub clock driver   Mike Turquette
• [PATCH 4/6] ARM: bcm476x: Add stub clock driver   Domenico Andreoli
• [PATCH 4/6] ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c   Tony Lindgren
• [PATCH 4/6] ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c   Tony Lindgren
• [PATCH 4/6] ARM: OMAP: iommu: optimize save and restore routines   Omar Ramirez Luna
• [PATCH 4/6] ARM: S3C2410: I2C driver polling mode support   Vasanth Ananthan
• [PATCH 4/6] ARM: S3C2410: I2C driver polling mode support   Tomasz Figa
• [PATCH 4/6] ARM: S3C2410: I2C driver polling mode support   Heiko Stübner
• [PATCH 4/6] ARM: smp_twd: don't warn on no DT node   Rob Herring
• [PATCH 4/6] ARM: ux500: Add UART support to the u9540 Device Tree   Lee Jones
• [PATCH 4/6] ARM: ux500: Add UART support to the u9540 Device Tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] ARM: ux500: Add UART support to the u9540 Device Tree   Lee Jones
• [PATCH 4/6] ARM: ux500: Add UART support to the u9540 Device Tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] ARM: ux500: Add UART support to the u9540 Device Tree   Lee Jones
• [PATCH 4/6] ARM: ux500: Add UART support to the u9540 Device Tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] ARM: ux500: Add UART support to the u9540 Device Tree   Linus Walleij
• [PATCH 4/6] ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT   Lee Jones
• [PATCH 4/6] ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT   Linus Walleij
• [PATCH 4/6] Serial: AT91: Enable tx dma   Elen Song
• [PATCH 4/6] usb: ohci-at91: switch pm ops   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] ARM: clps711x: added missing definitions   Alexander Shiyan
• [PATCH 4/7] ARM: dts: add initial dts file for EXYNOS5440, SSDK5440   Kukjin Kim
• [PATCH 4/7] ARM: dts: add initial dts file for EXYNOS5440, SSDK5440   Kukjin Kim
• [PATCH 4/7] ARM: hw_breakpoint: don't try to clear v6 debug registers during boot   Will Deacon
• [PATCH 4/7] ARM: hw_breakpoint: don't try to clear v6 debug registers during boot   Stephen Boyd
• [PATCH 4/7] ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver   Paul Walmsley
• [PATCH 4/7] ARM: OMAP2+: Remove unnecessary message when no SHA IP is present   Mark A. Greer
• [PATCH 4/7] ARM: omap: opp: add ABB data to voltage tables   Mike Turquette
• [PATCH 4/7] ARM: perf: check ARMv7 counter validity on a per-pmu basis   Will Deacon
• [PATCH 4/7] ARM: tegra30: common: enable csite clock   Joseph Lo
• [PATCH 4/7] ARM: tegra30: common: enable csite clock   Stephen Warren
• [PATCH 4/7] ARM: tegra30: common: enable csite clock   Joseph Lo
• [PATCH 4/7] ARM: ux500: Create a DTS hierarchy for ST-Ericsson's HREF boards   Lee Jones
• [PATCH 4/8] ARM: at91: fix external interrupt specification in board code   Nicolas Ferre
• [PATCH 4/8] ARM: at91: fix external interrupt specification in board code   ludovic.desroches
• [PATCH 4/8] ARM: plat-nomadik: move DMA40 header to <linux/platform_data>   Linus Walleij
• [PATCH 4/8] ARM: plat-nomadik: move DMA40 header to <linux/platform_data>   Vinod Koul
• [PATCH 4/8] ARM: S3C64XX: Handle revision-specific differences in Cragganmore modules   Mark Brown
• [PATCH 4/8] ARM: shmobile: armadillo800eva: enable restart   Simon Horman
• [PATCH 4/8] ARM: ux500: List DT compatibility using platform names rather than by board   Lee Jones
• [PATCH 4/8] ARM: zynq: dts: split up device tree   Josh Cartwright
• [PATCH 4/8] cpufreq: db8500: Fetch cpufreq table from platform data   Ulf Hansson
• [PATCH 4/8] cpufreq: db8500: Fetch cpufreq table from platform data   Lee Jones
• [PATCH 4/8] cpufreq: db8500: Fetch cpufreq table from platform data   Lee Jones
• [PATCH 4/8] i2c: omap: also complete() when stat becomes zero   Felipe Balbi
• [PATCH 4/9] ARM/dts: omap4-sdp: Disable unused McBSP3   Peter Ujfalusi
• [PATCH 4/9] ARM: export default read_current_timer   Arnd Bergmann
• [PATCH 4/9] ARM: export default read_current_timer   Jonathan Austin
• [PATCH 4/9] ARM: export default read_current_timer   Russell King - ARM Linux
• [PATCH 4/9] ARM: export default read_current_timer   Alexander Holler
• [PATCH 4/9] ARM: Kirkwood: Convert dockstar to pinctrl.   Andrew Lunn
• [PATCH 4/9] pinctrl: SPEAr1310: fix clcd high resolution pin group name   Viresh Kumar
• [PATCH 4/9] uprobes: allow arch access to xol slot   Rabin Vincent
• [PATCH 4/9] uprobes: allow arch access to xol slot   Srikar Dronamraju
• [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX   Richard Cochran
• [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX   Tony Lindgren
• [PATCH 5/5] ARM: AT91: Add AT91RM9200 device tree   Joachim Eastwood
• [PATCH 5/5] ARM: AT91: Add AT91RM9200 device tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] ARM: AT91: Add AT91RM9200 device tree   Joachim Eastwood
• [PATCH 5/5] ARM: Dove: Make use of MVEBU GPIO driver   Andrew Lunn
• [PATCH 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH 5/5] arm: mvebu: Added SMP support for Armada XP   Andrew Lunn
• [PATCH 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH 5/5] arm: mvebu: Added SMP support for Armada XP   Andrew Lunn
• [PATCH 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH 5/5] ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM   Paul Walmsley
• [PATCH 5/5] ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM   Rajendra Nayak
• [PATCH 5/5] ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM   Russ Dill
• [PATCH 5/5] ARM: omap: initialize voltdm->nominal_volt   Mike Turquette
• [PATCH 5/5] ARM: PXA: Zipit Z2: Fix backlight PWM device number   Vasily Khoruzhick
• [PATCH 5/5] ARM: PXA: Zipit Z2: Fix backlight PWM device number   Marek Vasut
• [PATCH 5/5] ARM: PXA: Zipit Z2: Fix backlight PWM device number   Vasily Khoruzhick
• [PATCH 5/5] ARM: PXA: Zipit Z2: Fix backlight PWM device number   Marek Vasut
• [PATCH 5/5] ARM: tegra: config: enable spi driver for Tegra SLINK controller   Laxman Dewangan
• [PATCH 5/5] ARM: tegra: select SPARSE_IRQ   Stephen Warren
• [PATCH 5/5] ASoC: sam9g20_wm8731: fix the issue for non-DT kernel   Bo Shen
• [PATCH 5/5] ASoC: sam9g20_wm8731: fix the issue for non-DT kernel   Mark Brown
• [PATCH 5/5] ASoC: sam9g20_wm8731: fix the issue for non-DT kernel   Bo Shen
• [PATCH 5/5] AVR32: Remove HAVE_NET_MACB   Joachim Eastwood
• [PATCH 5/5] clk: ux500: Register slimbus clock lookups for u8500   Ulf Hansson
• [PATCH 5/5] i2c: i2c-sh_mobile: fix spurious transfer request timed out   Shinya Kuribayashi
• [PATCH 5/5] pinctrl/nomadik: merge old pincfg header   Linus Walleij
• [PATCH 5/5 v6] gpio: Add block gpio to several gpio drivers   Roland Stigge
• [PATCH 5/6] ARM: bcm476x: Add restart hook   Domenico Andreoli
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Martin Michlmayr
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Andrew Lunn
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Arnd Bergmann
• [PATCH 5/6] ARM: dove: Remove watchdog from DT   Andrew Lunn
• [PATCH 5/6] ARM: EXYNOS: Add support for Exynos secure firmware   Olof Johansson
• [PATCH 5/6] ARM: EXYNOS: Add support for Exynos secure firmware   Tomasz Figa
• [PATCH 5/6] ARM: EYNOS5: SATA controller driver   Vasanth Ananthan
• [PATCH 5/6] ARM: EYNOS5: SATA controller driver   Tomasz Figa
• [PATCH 5/6] ARM: highbank: abstract out SCU usage   Rob Herring
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Tony Lindgren
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Laurent Pinchart
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Tony Lindgren
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Laurent Pinchart
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Tony Lindgren
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Laurent Pinchart
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Tony Lindgren
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Tony Lindgren
• [PATCH 5/6] ARM: OMAP: remove plat/clock.h   Tony Lindgren
• [PATCH 5/6] ARM: OMAP: remove plat/clock.h   Paul Walmsley
• [PATCH 5/6] ARM: ux500: Correct SDI5 address and add some format changes   Lee Jones
• [PATCH 5/6] ARM: ux500: Correct SDI5 address and add some format changes   Linus Walleij
• [PATCH 5/6] ARM: ux500: Enable SDI4 port on the u9540 when booting with Device Tree   Lee Jones
• [PATCH 5/6] ARM: ux500: Enable SDI4 port on the u9540 when booting with Device Tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: ux500: Enable SDI4 port on the u9540 when booting with Device Tree   Lee Jones
• [PATCH 5/6] Serial: AT91: Request rx dma channel   Elen Song
• [PATCH 5/6] usb: at91_ude: switch pm ops   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] ARM: clps711x: make all virtual addresses definition via one macro   Alexander Shiyan
• [PATCH 5/7] ARM: clps711x: make all virtual addresses definition via one macro   Arnd Bergmann
• [PATCH 5/7] ARM: clps711x: make all virtual addresses definition via one macro   Alexander Shiyan
• [PATCH 5/7] ARM: dts: add clock controller node for Samsung EXYNOS5440   Kukjin Kim
• [PATCH 5/7] ARM: dts: add clock controller node for Samsung EXYNOS5440   Kukjin Kim
• [PATCH 5/7] ARM: hw_breakpoint: make boot quieter without CPUID feature registers   Will Deacon
• [PATCH 5/7] ARM: hw_breakpoint: make boot quieter without CPUID feature registers   Stephen Boyd
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Aaro Koskinen
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Tony Lindgren
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Tony Lindgren
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Tony Lindgren
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Tony Lindgren
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Aaro Koskinen
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer (fwd)   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer (fwd)   Paul Walmsley
• [PATCH 5/7] ARM: omap: voltage: per-voltage domain ABB data   Mike Turquette
• [PATCH 5/7] ARM: perf: register cpu_notifier at driver init   Will Deacon
• [PATCH 5/7] ARM: tegra30: clocks: add CPU low-power function into tegra_cpu_car_ops   Joseph Lo
• [PATCH 5/7] ARM: ux500: Create a Device Tree for early HREFs   Lee Jones
• [PATCH 5/7] crypto: omap-sham: Convert to use pm_runtime API   Mark A. Greer
• [PATCH 5/8] ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.   Nicolas Ferre
• [PATCH 5/8] ARM: plat-nomadik: move MTU, kill plat-nomadik   Linus Walleij
• [PATCH 5/8] ARM: S3C64XX: Handle new Amrut modules on Cragganmore   Mark Brown
• [PATCH 5/8] ARM: shmobile: marzen: add HSPI support   Simon Horman
• [PATCH 5/8] ARM: ux500: Add node for the MMC GPIO regulator   Lee Jones
• [PATCH 5/8] ARM: zynq: add COMMON_CLK support   Josh Cartwright
• [PATCH 5/8] i2c: omap: introduce and use OMAP_I2C_IP_VERSION_3   Felipe Balbi
• [PATCH 5/8] i2c: omap: introduce and use OMAP_I2C_IP_VERSION_3   Benoit Cousson
• [PATCH 5/8] i2c: omap: introduce and use OMAP_I2C_IP_VERSION_3   Felipe Balbi
• [PATCH 5/8] i2c: omap: introduce and use OMAP_I2C_IP_VERSION_3   Benoit Cousson
• [PATCH 5/8] i2c: omap: introduce and use OMAP_I2C_IP_VERSION_3   Felipe Balbi
• [PATCH 5/8] mfd: db8500: Connect ARMSS clk to ARM OPP   Ulf Hansson
• [PATCH 5/9] ARM/dts: omap5-evm: Disable unused McBSP3   Peter Ujfalusi
• [PATCH 5/9] ARM: Kirkwood: Convert dreamplug to pinctrl.   Andrew Lunn
• [PATCH 5/9] ARM: Xen: fix initial build problems:   Arnd Bergmann
• [PATCH 5/9] ARM: Xen: fix initial build problems:   Stefano Stabellini
• [PATCH 5/9] ARM: Xen: fix initial build problems:   Russell King - ARM Linux
• [PATCH 5/9] ARM: Xen: fix initial build problems:   Arnd Bergmann
• [PATCH 5/9] pinctrl: SPEAr1310: Fix value of PERIP_CFG reigster and MCIF_SEL_SHIFT   Viresh Kumar
• [PATCH 5/9] uprobes: allow arch-specific initialization   Rabin Vincent
• [PATCH 5/9] uprobes: allow arch-specific initialization   Srikar Dronamraju
• [PATCH 6/6] arm: at91: drop at91_suspend_entering_slow_clock   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: bcm476x: Instantiate console UART   Domenico Andreoli
• [PATCH 6/6] ARM: bcm476x: Instantiate console UART   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: bcm476x: Instantiate console UART   Domenico Andreoli
• [PATCH 6/6] ARM: bcm476x: Instantiate console UART   Stephen Warren
• [PATCH 6/6] ARM: bcm476x: Instantiate console UART   Domenico Andreoli
• [PATCH 6/6] ARM: EXYNOS5: SATA PHY controller driver   Vasanth Ananthan
• [PATCH 6/6] ARM: EXYNOS5: SATA PHY controller driver   Tomasz Figa
• [PATCH 6/6] ARM: EXYNOS5: SATA PHY controller driver   Vasanth Ananthan
• [PATCH 6/6] ARM: EXYNOS5: SATA PHY controller driver   Tomasz Figa
• [PATCH 6/6] ARM: EXYNOS5: SATA PHY controller driver   Tomasz Figa
• [PATCH 6/6] ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up   Olof Johansson
• [PATCH 6/6] ARM: highbank: Add initial ECX-2000 support   Rob Herring
• [PATCH 6/6] ARM: OMAP2+: Move iommu/iovmm headers to platform_data   Tony Lindgren
• [PATCH 6/6] ARM: OMAP2+: Move iommu/iovmm headers to platform_data   Tony Lindgren
• [PATCH 6/6] ARM: ux500: Convert DT_MACHINE_START to use SMP operations   Lee Jones
• [PATCH 6/6] ARM: ux500: Convert DT_MACHINE_START to use SMP operations   Linus Walleij
• [PATCH 6/6] mfd: Differentiate between u8500 and u9540 TCDM address mapping   Lee Jones
• [PATCH 6/6] mfd: Differentiate between u8500 and u9540 TCDM address mapping   Arnd Bergmann
• [PATCH 6/6] mfd: Differentiate between u8500 and u9540 TCDM address mapping   Lee Jones
• [PATCH 6/6] mfd: Differentiate between u8500 and u9540 TCDM address mapping   Arnd Bergmann
• [PATCH 6/6] Serial: AT91: Enable rx cyclic DMA transfer   Elen Song
• [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core   ABRAHAM, KISHON VIJAY
• [PATCH 6/7] ARM: clps711x: merge all CLPS711X-defconfigs into one   Alexander Shiyan
• [PATCH 6/7] ARM: hw_breakpoint: check if monitor mode is enabled during validation   Will Deacon
• [PATCH 6/7] ARM: omap: abb: init & transition functions   Mike Turquette
• [PATCH 6/7] ARM: omap: abb: init & transition functions   Dimitar Dimitrov
• [PATCH 6/7] ARM: perf: return NOTIFY_DONE from cpu notifier when no available PMU   Will Deacon
• [PATCH 6/7] ARM: tegra30: flowctrl: add cpu_suspend_exter/exit function   Joseph Lo
• [PATCH 6/7] ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF   Lee Jones
• [PATCH 6/7] crypto: omap-sham: Add code to use dmaengine API   Mark A. Greer
• [PATCH 6/7] crypto: omap-sham: Add code to use dmaengine API   Kasatkin, Dmitry
• [PATCH 6/7] crypto: omap-sham: Add code to use dmaengine API   Mark A. Greer
• [PATCH 6/7] pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC   Kukjin Kim
• [PATCH 6/7] pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC   Kukjin Kim
• [PATCH 6/7] watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr   Paul Walmsley
• [PATCH 6/7] watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr   Jon Hunter
• [PATCH 6/7] watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr   Paul Walmsley
• [PATCH 6/7] watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr   Paul Walmsley
• [PATCH 6/7] watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr   Felipe Balbi
• [PATCH 6/7] watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr   Paul Walmsley
• [PATCH 6/8] ARM: at91/i2c: change id to let i2c-gpio work   Nicolas Ferre
• [PATCH 6/8] ARM: at91/i2c: change id to let i2c-gpio work   ludovic.desroches
• [PATCH 6/8] ARM: mach-shmobile: Use DT_MACHINE for mackerel   Simon Horman
• [PATCH 6/8] ARM: S3C64XX: Add hookup for Deanston module on Cragganmore   Mark Brown
• [PATCH 6/8] ARM: ux500: Change the type of interrupt to something compatible   Lee Jones
• [PATCH 6/8] clk: ux500: Support for prcmu_scalable_rate clock   Ulf Hansson
• [PATCH 6/8] i2c: omap: wait for transfer completion before sending STP bit   Felipe Balbi
• [PATCH 6/8] mfd/ab8500-core: use irq_domain_add_simple()   Linus Walleij
• [PATCH 6/8] serial: xilinx_uartps: kill CONFIG_OF conditional   Josh Cartwright
• [PATCH 6/9] ARM/dts: omap4-sdp: pinmux configuration for audio   Peter Ujfalusi
• [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net to pinctrl.   Andrew Lunn
• [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net to pinctrl.   Josh Coombs
• [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net to pinctrl.   Andrew Lunn
• [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net to pinctrl.   Josh Coombs
• [PATCH 6/9] ARM: pass -marm to gcc by default for both C and assembler   Arnd Bergmann
• [PATCH 6/9] ARM: pass -marm to gcc by default for both C and assembler   Dave Martin
• [PATCH 6/9] pinctrl: SPEAr1310: Separate out pci pins from pcie_sata pin group   Viresh Kumar
• [PATCH 6/9] uprobes: flush cache after xol write   Rabin Vincent
• [PATCH 6/9] uprobes: flush cache after xol write   Oleg Nesterov
• [PATCH 6/9] uprobes: flush cache after xol write   Rabin Vincent
• [PATCH 6/9] uprobes: flush cache after xol write   Oleg Nesterov
• [PATCH 6/9] uprobes: flush cache after xol write   Ananth N Mavinakayanahalli
• [PATCH 6/9] uprobes: flush cache after xol write   Oleg Nesterov
• [PATCH 6/9] uprobes: flush cache after xol write   Ananth N Mavinakayanahalli
• [PATCH 7/7] ARM: clps711x: merge files related to EDB7211-board into one   Alexander Shiyan
• [PATCH 7/7] ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC   Kukjin Kim
• [PATCH 7/7] ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC   Kukjin Kim
• [PATCH 7/7] ARM: hw_breakpoint: use CRn as argument for debug reg accessor macros   Will Deacon
• [PATCH 7/7] ARM: hw_breakpoint: use CRn as argument for debug reg accessor macros   Stephen Boyd
• [PATCH 7/7] ARM: OMAP2+: PRCM: remove omap_prcm_get_reset_sources()   Paul Walmsley
• [PATCH 7/7] ARM: omap: voltage: add ABB to voltage scaling   Mike Turquette
• [PATCH 7/7] ARM: perf: consistently use arm_pmu->name for PMU name   Will Deacon
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Joseph Lo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Stephen Warren
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Joseph Lo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Stephen Warren
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Colin Cross
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Joseph Lo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Joseph Lo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Joseph Lo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Shawn Guo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Joseph Lo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Shawn Guo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Colin Cross
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Colin Cross
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Stephen Warren
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Joseph Lo
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Stephen Warren
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Colin Cross
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Peter De Schrijver
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Peter De Schrijver
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Stephen Warren
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Peter De Schrijver
• [PATCH 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Peter De Schrijver
• [PATCH 7/7] ARM: ux500: Remove platform specific device registration when DT is enabled   Lee Jones
• [PATCH 7/7] crypto: omap_sham: Remove usage of private DMA API   Mark A. Greer
• [PATCH 7/8] ARM: at91/i2c: change id to let i2c-at91 work   Nicolas Ferre
• [PATCH 7/8] ARM: at91/i2c: change id to let i2c-at91 work   ludovic.desroches
• [PATCH 7/8] ARM: S3C64XX: Add WM2200 module for Cragganmore   Mark Brown
• [PATCH 7/8] ARM: shmobile: Remove G3EVM machine support   Simon Horman
• [PATCH 7/8] ARM: ux500: CONFIG: Enable GPIO Regulators   Lee Jones
• [PATCH 7/8] clk: ux500: Add armss clk and fixup smp_twd clk for u8500   Ulf Hansson
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Felipe Balbi
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Jean Delvare
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Russell King - ARM Linux
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Jean Delvare
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Russell King - ARM Linux
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Jean Delvare
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Russell King - ARM Linux
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Jean Delvare
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Al Viro
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Al Viro
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Al Viro
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Russell King - ARM Linux
• [PATCH 7/8] i2c: add 'transferred' field to struct i2c_msg   Jean Delvare
• [PATCH 7/8] mfd/db8500-prcmu: use the irq_domain_add_simple()   Linus Walleij
• [PATCH 7/8] serial: xilinx_uartps: get clock rate info from dts   Josh Cartwright
• [PATCH 7/9] ARM/dts: omap4-panda: pinmux configuration for audio   Peter Ujfalusi
• [PATCH 7/9] ARM: be really quiet when building with 'make -s'   Arnd Bergmann
• [PATCH 7/9] ARM: Kirkwood: Convert ib62x0 to pinctrl.   Andrew Lunn
• [PATCH 7/9] ARM: Kirkwood: Convert ib62x0 to pinctrl.   Simon Baatz
• [PATCH 7/9] pinctrl: SPEAr1310: add register entries for enabling pad direction   Viresh Kumar
• [PATCH 7/9] uprobes: add arch write opcode hook   Rabin Vincent
• [PATCH 8/8] ARM: at91: drop duplicated config SOC_AT91SAM9 entry   Nicolas Ferre
• [PATCH 8/8] ARM: plat-nomadik: convert platforms to SPARSE_IRQ   Linus Walleij
• [PATCH 8/8] ARM: S3C64XX: Add handset module to probed Glenfarclas modules   Mark Brown
• [PATCH 8/8] ARM: shmobile: Remove G4EVM machine support   Simon Horman
• [PATCH 8/8] ARM: ux500: Convert DT_MACHINE_START to use SMP operations   Lee Jones
• [PATCH 8/8] clocksource: xilinx_ttc: add OF_CLK support   Josh Cartwright
• [PATCH 8/8] cpufreq: db8500: Use armss clk to update frequency   Ulf Hansson
• [PATCH 8/8] cpufreq: db8500: Use armss clk to update frequency   Ulf Hansson
• [PATCH 8/8] cpufreq: db8500: Use armss clk to update frequency   Rafael J. Wysocki
• [PATCH 8/8] i2c: omap: implement handling for 'transferred' bytes   Felipe Balbi
• [PATCH 8/9] ARM/dts: Add pinctrl driver entries for omap5   Peter Ujfalusi
• [PATCH 8/9] ARM: binfmt_flat: unused variable 'persistent'   Arnd Bergmann
• [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards to pinctrl.   Andrew Lunn
• [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards to pinctrl.   Michael Walle
• [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards to pinctrl.   Michael Walle
• [PATCH 8/9] ARM: support uprobe handling   Rabin Vincent
• [PATCH 8/9] pinctrl: SPEAr1340: Make DDR reset & clock pads as gpio   Viresh Kumar
• [PATCH 9/9] ARM/dts: omap5-evm: pinmux configuration for audio   Peter Ujfalusi
• [PATCH 9/9] ARM: add uprobes support   Rabin Vincent
• [PATCH 9/9] ARM: add uprobes support   Dave Martin
• [PATCH 9/9] ARM: add uprobes support   Rabin Vincent
• [PATCH 9/9] ARM: add uprobes support   Dave Martin
• [PATCH 9/9] ARM: add uprobes support   Dave Martin
• [PATCH 9/9] ARM: add uprobes support   Jon Medhurst (Tixy)
• [PATCH 9/9] ARM: add uprobes support   Oleg Nesterov
• [PATCH 9/9] ARM: add uprobes support   Rabin Vincent
• [PATCH 9/9] ARM: add uprobes support   Rabin Vincent
• [PATCH 9/9] ARM: add uprobes support   Rabin Vincent
• [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 to pinctrl.   Andrew Lunn
• [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 to pinctrl.   Thomas Petazzoni
• [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 to pinctrl.   Andrew Lunn
• [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 to pinctrl.   Thomas Petazzoni
• [PATCH 9/9] ARM: warnings in arch/arm/include/asm/uaccess.h   Arnd Bergmann
• [PATCH 9/9] pinctrl: SPEAr1340: Add clcd sleep mode pin configuration   Viresh Kumar
• [PATCH] [ARM] Build failure CONFIG_ARCH_KIRKWOOD_DT relies on CACHE_FEROCEON_L2   Jason Gunthorpe
• [PATCH] [ARM] Build failure CONFIG_ARCH_KIRKWOOD_DT relies on CACHE_FEROCEON_L2   Jason Cooper
• [PATCH] [ARM] Build failure CONFIG_ARCH_KIRKWOOD_DT relies on CACHE_FEROCEON_L2   Olof Johansson
• [PATCH] [ARM] Build failure CONFIG_ARCH_KIRKWOOD_DT relies on CACHE_FEROCEON_L2   Jason Gunthorpe
• [PATCH] [ARM] Build failure CONFIG_ARCH_KIRKWOOD_DT relies on CACHE_FEROCEON_L2   Jason Cooper
• [PATCH] [ARM] Enable the second I2C bus on Marvell Kirkwood   Jason Gunthorpe
• [PATCH] [ARM] Enable the second I2C bus on Marvell Kirkwood   Jason Cooper
• [PATCH] [ARM] Enable the second I2C bus on Marvell Kirkwood   Jason Cooper
• [PATCH] [ARM] pxa/spitz_pm.c: Fix hang under certain conditions when resuming from STR.   dromede at gmail.com
• [PATCH] [ARM] pxa/spitz_pm.c: Fix hang under certain conditions when resuming from STR.   Haojian Zhuang
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Russell King - ARM Linux
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Dave Martin
• [PATCH] [ARM] Use AT() in the linker script to create correct program headers   Jason Gunthorpe
• [PATCH] [media] s5p-csis: Added RAW data format as the supported format.   Ritesh Kumar Solanki
• [PATCH] [media] s5p-csis: Added RAW data format as the supported format.   Sylwester Nawrocki
• [PATCH] [media] s5p-tv: don't include linux/version.h in mixer_video.c   Jesper Juhl
• [PATCH] [media] s5p-tv: don't include linux/version.h in mixer_video.c   Sylwester Nawrocki
• [PATCH] [media] s5p-tv: remove unused including <linux/version.h>   Wei Yongjun
• [PATCH] [media] s5p-tv: remove unused including <linux/version.h>   Sylwester Nawrocki
• [PATCH] [PATCH] remove pcm049 from Makefile   Josef Holzmayr
• [PATCH] [PATCH] remove pcm049 from Makefile   Sergei Shtylyov
• [PATCH] [RFC] crypto: sha1/arm - fix build with CONFIG_THUMB2_KERNEL   Jussi Kivilinna
• [PATCH] [RFC] crypto: sha1/arm - fix build with CONFIG_THUMB2_KERNEL   David McCullough
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Thomas Petazzoni
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Sebastian Hesselbarth
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Thomas Petazzoni
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Andrew Lunn
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Thomas Petazzoni
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Linus Walleij
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Linus Walleij
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Mark Brown
• [PATCH] [RFC] pinctrl: mvebu: reset pins to an UNKNOWN state on startup   Stephen Warren
• [PATCH] Add device tree file for the armadeus apf27   Philippe Reynes
• [PATCH] Add device tree file for the armadeus apf27   Sascha Hauer
• [PATCH] Add device tree file for the armadeus apf27   Philippe Reynes
• [PATCH] Add device tree file for the armadeus apf27   Sascha Hauer
• [PATCH] Add device tree file for the armadeus apf27 (v2)   Philippe Reynes
• [PATCH] Add FDT support to Pandaboard initialization   Constantine Shulyupin
• [PATCH] Add FDT support to Pandaboard initialization   Felipe Balbi
• [PATCH] Add FDT support to Pandaboard initialization   Tony Lindgren
• [PATCH] Add forgotten mask in cache way unlock for PL310.   Christopher Kenna
• [PATCH] Add McSPI devices found in AM33xx SoC to dtsi   Phil Pokorny
• [PATCH] Add McSPI devices found in AM33xx SoC to dtsi   Philip, Avinash
• [PATCH] Add McSPI devices found in AM33xx SoC to dtsi   Phil Pokorny
• [PATCH] Add McSPI devices found in AM33xx SoC to dtsi   Philip, Avinash
• [PATCH] Add McSPI devices found in AM33xx SoC to dtsi   Hebbar, Gururaja
• [PATCH] arch/arm/mach-omap1/devices.c: Remove unecessary semicolon   Tony Lindgren
• [PATCH] arch/arm/mach-omap2: Remove unecessary semicolon   Tony Lindgren
• [PATCH] arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon   Tony Lindgren
• [PATCH] arm-dt: Enable DT proc updates.   Pantelis Antoniou
• [PATCH] arm-dt: Enable DT proc updates.   Rob Herring
• [PATCH] arm/dts: Add basic support for gta04 (Openmoko next generation) board.   Marek Belisko
• [PATCH] arm/dts: am33xx rtc node   Afzal Mohammed
• [PATCH] arm/dts: am33xx rtc node   Mohammed, Afzal
• [PATCH] arm/dts: am33xx rtc node   Afzal Mohammed
• [PATCH] arm/dts: at91sam9g20ek_common: Fix typos in buttons labels.   Marek Belisko
• [PATCH] ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio   Peter Ujfalusi
• [PATCH] ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio   Benoit Cousson
• [PATCH] ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio   Péter Ujfalusi
• [PATCH] ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio   Tony Lindgren
• [PATCH] arm/omap: Replace board_ref_clock with enum values   Tony Lindgren
• [PATCH] ARM: AM33xx: add support for reboot   Daniel Mack
• [PATCH] ARM: AM33xx: add support for reboot   Daniel Mack
• [PATCH] ARM: AM33xx: add support for reboot   Hiremath, Vaibhav
• [PATCH] ARM: AM33xx: add support for reboot   Bedia, Vaibhav
• [PATCH] ARM: AM33xx: add support for reboot   Afzal Mohammed
• [PATCH] ARM: AM33xx: add support for reboot   Daniel Mack
• [PATCH] ARM: AM33xx: add support for reboot   Hiremath, Vaibhav
• [PATCH] ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driver   Jon Hunter
• [PATCH] ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driver   Tony Lindgren
• [PATCH] ARM: arch timer: Export 'read_current_timer' symbol   Mark A. Greer
• [PATCH] ARM: arch timer: Export 'read_current_timer' symbol   Will Deacon
• [PATCH] ARM: at91: dt: evk-pro3: enable uart0 and uart2   Fabio Porcedda
• [PATCH] ARM: at91: dt: evk-pro3: enable uart0 and uart2   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: dt: evk-pro3: enable uart0 and uart2   Fabio Porcedda
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Todd Poynor
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Dave Martin
• [PATCH] arm: bcm2835: enable proc and sysfs in defconfig   Thomas Petazzoni
• [PATCH] arm: bcm2835: enable proc and sysfs in defconfig   Stephen Warren
• [PATCH] arm: bcm2835: enable proc and sysfs in defconfig   Sergei Shtylyov
• [PATCH] arm: bcm2835: enable proc and sysfs in defconfig   Thomas Petazzoni
• [PATCH] ARM: bcm2835: fix typos in DT binding documentation   Stephen Warren
• [PATCH] ARM: bcm2835: fix typos in DT binding documentation   Olof Johansson
• [PATCH] ARM: bcm2835: implement machine restart hook   Stephen Warren
• [PATCH] arm: bcm2835: remove useless variables from Makefile.boot   Thomas Petazzoni
• [PATCH] arm: bcm2835: remove useless variables from Makefile.boot   Stephen Warren
• [PATCH] ARM: boot: Fix usage of kecho   Fabio Estevam
• [PATCH] ARM: boot: Fix usage of kecho   Nicolas Pitre
• [PATCH] ARM: boot: Fix usage of kecho   Arnd Bergmann
• [PATCH] ARM: cache-l2x0.c: Apply the workaround to r3p0 only   srinidhi kasagar
• [PATCH] ARM: davinci: dm644x: fix out range signal for ED   Prabhakar
• [PATCH] ARM: davinci: dm644x: fix out range signal for ED   Sekhar Nori
• [PATCH] ARM: davinci: dm644x: fix out range signal for ED   Prabhakar Lad
• [PATCH] ARM: davinci: dm644x: fix out range signal for ED   Sekhar Nori
• [PATCH] ARM: davinci: dm644x: fix out range signal for ED   Prabhakar Lad
• [PATCH] ARM: davinci: dm644x: fix out range signal for ED   Sekhar Nori
• [PATCH] ARM: davinci: dm644x: fix out range signal for ED   Prabhakar Lad
• [PATCH] ARM: davinci: dm644x: move the dereference below the NULL test   Sekhar Nori
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Rob Herring
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Russell King - ARM Linux
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Rob Herring
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Russell King - ARM Linux
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Russell King - ARM Linux
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Nicolas Pitre
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Nicolas Pitre
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Gregory CLEMENT
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Johannes Stezenbach
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Russell King - ARM Linux
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Rob Herring
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Arnd Bergmann
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Johannes Stezenbach
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Rob Herring
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Nicolas Pitre
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Johannes Stezenbach
• [PATCH] ARM: dm365: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Prabhakar Lad
• [PATCH] ARM: dma-mapping: fix build warning in __dma_alloc()   Jingoo Han
• [PATCH] ARM: dma-mapping: support debug_dma_mapping_error   Ming Lei
• [PATCH] ARM: dma-mapping: support debug_dma_mapping_error   Marek Szyprowski
• [PATCH] ARM: dma-mapping: support debug_dma_mapping_error   Russell King - ARM Linux
• [PATCH] ARM: dma-mapping: support debug_dma_mapping_error   Ming Lei
• [PATCH] ARM: Dove: update defconfig   Sebastian Hesselbarth
• [PATCH] arm: dt: tegra: fix length of pad control and mux registers   Pritesh Raithatha
• [PATCH] arm: dt: tegra: fix length of pad control and mux registers   Stephen Warren
• [PATCH] ARM: dt: tegra: ventana: define pinmux for ddc   Mark Zhang
• [PATCH] ARM: dt: tegra: ventana: define pinmux for ddc   Stephen Warren
• [PATCH] ARM: dt: tegra: ventana: define pinmux for ddc   Mark Zhang
• [PATCH] ARM: dt: tegra: ventana: define pinmux for ddc   Stephen Warren
• [PATCH] ARM: dt: tegra: ventana: define pinmux for ddc   Mark Zhang
• [PATCH] ARM: dt: tegra: ventana: define pinmux for ddc   Stephen Warren
• [PATCH] ARM: dt: tegra: ventana: define pinmux for ddc   Mark Zhang
• [PATCH] ARM: dts: Add am335x-evmsk.dts   AnilKumar Ch
• [PATCH] ARM: dts: AM33XX: Add tsl2550 ambient light sensor DT data   AnilKumar, Chimata
• [PATCH] ARM: dts: AM33XX: Add tsl2550 ambient light sensor DT data   Benoit Cousson
• [PATCH] ARM: dts: AM33XX: Add tsl2550 ambient light sensor DT data   AnilKumar, Chimata
• [PATCH] ARM: dts: cfa10049: Add FEC to the CFA-10049 expansion board   Shawn Guo
• [PATCH] ARM: dts: compile Integrator device trees   Linus Walleij
• [PATCH] ARM: dts: compile Integrator device trees   Olof Johansson
• [PATCH] ARM: dts: exynos4210-trats: Split memory into 4 sections   Tomasz Figa
• [PATCH] ARM: dts: exynos4210-trats: Split memory into 4 sections   Kukjin Kim
• [PATCH] ARM: dts: exynos4210-trats: Split memory into 4 sections   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Add support for Exynos4x12 SoCs   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310   Tomasz Figa
• [PATCH] ARM: dts: imx27-3ds: Remove local watchdog inclusion   Sascha Hauer
• [PATCH] ARM: dts: imx28: add the `clock-names` for gpmi-nand   Huang Shijie
• [PATCH] ARM: dts: imx28: add the `clock-names` for gpmi-nand   Fabio Estevam
• [PATCH] ARM: dts: imx28: add the `clock-names` for gpmi-nand   Huang Shijie
• [PATCH] ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'   Shawn Guo
• [PATCH] ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'   Huang Shijie
• [PATCH] ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'   Shawn Guo
• [PATCH] ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'   Olof Johansson
• [PATCH] ARM: dts: imx6q-sabreauto: Add basic support   Shawn Guo
• [PATCH] ARM: dts: imx6q-sabreauto: Add basic support   Fabio Estevam
• [PATCH] ARM: dts: imx6q-sabreauto: Add basic support   Shawn Guo
• [PATCH] ARM: dts: imx6q: enable snvs lp rtc   Shawn Guo
• [PATCH] ARM: dts: mxs: Add PWM3 muxing options for i.MX28   julien.boibessot at free.fr
• [PATCH] ARM: dts: mxs: Add PWM3 muxing options for i.MX28   Shawn Guo
• [PATCH] ARM: dts: mxs: add the "clock-names" for gpmi-nand   Huang Shijie
• [PATCH] ARM: dts: mxs: add the "clock-names" for gpmi-nand   Marek Vasut
• [PATCH] ARM: dts: mxs: add the "clock-names" for gpmi-nand   Shawn Guo
• [PATCH] ARM: dts: mxs: add the "clock-names" for gpmi-nand   Shawn Guo
• [PATCH] ARM: dts: mxs: add the "clock-names" for gpmi-nand   Arnd Bergmann
• [PATCH] ARM: dts: mxs: add the `clock-names` for gpmi-nand   Huang Shijie
• [PATCH] ARM: dts: mxs: add the `clock-names` for gpmi-nand   Marek Vasut
• [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad   Sourav Poddar
• [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad   Benoit Cousson
• [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad   Sourav
• [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad   Benoit Cousson
• [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad   Tony Lindgren
• [PATCH] arm: dts: omap4-sdp: pinmux configuration for keypad   Sourav
• [PATCH] ARM: dts: OMAP: Move interrupt-parent to the root node to avoid duplication   Benoit Cousson
• [PATCH] ARM: dts: OMAP: Move interrupt-parent to the root node to avoid duplication   Péter Ujfalusi
• [PATCH] ARM: dts: OMAP: Move interrupt-parent to the root node to avoid duplication   Hiremath, Vaibhav
• [PATCH] ARM: dts: OMAP: Rename pandaES and var_som for consistency   Benoit Cousson
• [PATCH] ARM: dts: remove redundant imx dtb targets from Makefile   Shawn Guo
• [PATCH] ARM: dts: remove redundant imx dtb targets from Makefile   Olof Johansson
• [PATCH] ARM: Exynos5: Remove static io-remapping for gic and combiner   Kukjin Kim
• [PATCH] ARM: Exynos5: Remove static io-remapping for gic and combiner   Thomas Abraham
• [PATCH] ARM: Exynos5: Remove unused static uart resource information   Kukjin Kim
• [PATCH] ARM: Exynos5: Remove unused static uart resource information   Thomas Abraham
• [PATCH] ARM: EXYNOS5: Remove wrongly placed usb2.0 PHY_CFG definition from PMU_REG   Vivek Gautam
• [PATCH] ARM: EXYNOS5: Remove wrongly placed usb2.0 PHY_CFG definition from PMU_REG   Jingoo Han
• [PATCH] ARM: EXYNOS5: Remove wrongly placed usb2.0 PHY_CFG definition from PMU_REG   Vivek Gautam
• [PATCH] ARM: EXYNOS: exynos4-dt: Set .smp field of machine descriptor   Tomasz Figa
• [PATCH] ARM: EXYNOS: exynos4-dt: Set .smp field of machine descriptor   Tomasz Figa
• [PATCH] ARM: EXYNOS: exynos4-dt: Set .smp field of machine descriptor   Kyungmin Park
• [PATCH] ARM: EXYNOS: exynos4-dt: Set .smp field of machine descriptor   Kukjin Kim
• [PATCH] ARM: EXYNOS: exynos4-dt: Set .smp field of machine descriptor   Kukjin Kim
• [PATCH] ARM: Exynos: move interrupt combiner controller driver to drivers/irqchip   Thomas Abraham
• [PATCH] ARM: EXYNOS: Remove wrong I2S0 clock from peril clock   Sangsu Park
• [PATCH] ARM: EXYNOS: Remove wrong I2S0 clock from peril clock   Sangsu Park
• [PATCH] ARM: EXYNOS: Remove wrong I2S0 clock from peril clock   Sangbeom Kim
• [PATCH] ARM: EXYNOS: Remove wrong I2S0 clock from peril clock   Kukjin Kim
• [PATCH] ARM: Fix page counting in mem_init and show_mem   Michael Spang
• [PATCH] ARM: Fix the "WFI" instruction opcode definition.   Yangfei (Felix)
• [PATCH] ARM: Fix the "WFI" instruction opcode definition.   Rob Herring
• [PATCH] ARM: footbridge: nw_gpio_lock is raw_spin_lock   Arnd Bergmann
• [PATCH] ARM: footbridge: remove RTC_IRQ definition   Arnd Bergmann
• [PATCH] ARM: highbank: retry wfi on reset request   Rob Herring
• [PATCH] ARM: highbank: retry wfi on reset request   Rob Herring
• [PATCH] ARM: hw_breakpoint: Clear breakpoints before enabling monitor mode   Stephen Boyd
• [PATCH] ARM: hw_breakpoint: Clear breakpoints before enabling monitor mode   Will Deacon
• [PATCH] ARM: hw_breakpoint: Clear breakpoints before enabling monitor mode   Stephen Boyd
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Fabio Estevam
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   javier Martin
• [PATCH] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Fabio Estevam
• [PATCH] ARM: imx6q: let users input debug uart port number   Shawn Guo
• [PATCH] ARM: imx6q: let users input debug uart port number   Dirk Behme
• [PATCH] ARM: imx6q: remove imx_src_prepare_restart() call   Anatolij Gustschin
• [PATCH] ARM: imx6q: remove imx_src_prepare_restart() call   Shawn Guo
• [PATCH] ARM:IMX6Q:use pll2_pfd2_396m as the enfc_sel's parent   Mike Turquette
• [PATCH] ARM: imx: allow support to be disabled   Stephen Warren
• [PATCH] ARM: imx: allow support to be disabled   Shawn Guo
• [PATCH] ARM: imx: clk-imx27: Fix divider width field   Fabio Estevam
• [PATCH] ARM: imx: clk-imx27: Fix divider width field   Sascha Hauer
• [PATCH] ARM: imx: configs: Enable CONFIG_MEDIA_CAMERA_SUPPORT   Fabio Estevam
• [PATCH] ARM: imx: configs: Enable CONFIG_MEDIA_CAMERA_SUPPORT   Sascha Hauer
• [PATCH] ARM: imx: enable cpufreq for imx6q   Shawn Guo
• [PATCH] ARM: imx: fix return value check in imx3_init_l2x0()   Sascha Hauer
• [PATCH] ARM: imx: fix the return value check in imx_clk_busy_divider()   Sascha Hauer
• [PATCH] ARM: imx: select HAVE_IMX_SRC when SMP is enabled   Shawn Guo
• [PATCH] arm: include linux/sched.h in syscall.h   Wade Farnsworth
• [PATCH] arm: include linux/sched.h in syscall.h   Will Deacon
• [PATCH] arm: include linux/sched.h in syscall.h   Wade Farnsworth
• [PATCH] arm: include linux/sched.h in syscall.h   Will Deacon
• [PATCH] arm: include linux/sched.h in syscall.h   Russell King - ARM Linux
• [PATCH] arm: include linux/sched.h in syscall.h   Will Deacon
• [PATCH] arm: include linux/sched.h in syscall.h   Russell King - ARM Linux
• [PATCH] arm: increase FORCE_MAX_ZONEORDER for TI AM33XX   Tony Lindgren
• [PATCH] ARM: integrator_cp: fix build failure   Olof Johansson
• [PATCH] ARM: integrator_cp: fix build failure   Linus Walleij
• [PATCH] ARM: io: avoid GCC's offsettable addressing modes for halfword accesses   Will Deacon
• [PATCH] ARM: kexec: fix segment memory addresses check   Aaro Koskinen
• [PATCH] ARM: kexec: fix segment memory addresses check   Will Deacon
• [PATCH] arm: kirkwood: add support for ZyXEL NSA310   Tero Jaasko
• [PATCH] arm: kirkwood: add support for ZyXEL NSA310   Jason Cooper
• [PATCH] arm: kirkwood: add support for ZyXEL NSA310   Andrew Lunn
• [PATCH] arm: kirkwood: add support for ZyXEL NSA310   Tero Jaasko
• [PATCH] arm: kirkwood: add support for ZyXEL NSA310   Tero Jaasko
• [PATCH] arm: kirkwood: add support for ZyXEL NSA310   Jason Cooper
• [PATCH] arm: kirkwood: add support for ZyXEL NSA310   Andrew Lunn
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Andrew Lunn
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Andrew Lunn
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Andrew Lunn
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Stephen Warren
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Andrew Lunn
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Stephen Warren
• [PATCH] ARM: kirkwood: DT board setup for Network Space v2 and parents   Stephen Warren
• [PATCH] ARM: kirkwood: fix buttons on lsxl boards   Michael Walle
• [PATCH] ARM: kirkwood: fix buttons on lsxl boards   Jason Cooper
• [PATCH] ARM: kirkwood: fix buttons on lsxl boards   Jason Cooper
• [PATCH] ARM: kirkwood: fix LEDs names for lsxl boards   Michael Walle
• [PATCH] ARM: kirkwood: fix LEDs names for lsxl boards   Jason Cooper
• [PATCH] ARM: kirkwood: fix LEDs names for lsxl boards   Jason Cooper
• [PATCH] ARM: kirkwood: Increase NAND chip-delay for DNS-320   Jamie Lentin
• [PATCH] ARM: kirkwood: Increase NAND chip-delay for DNS-320   Andrew Lunn
• [PATCH] ARM: kirkwood: Increase NAND chip-delay for DNS-320   Jamie Lentin
• [PATCH] ARM: kirkwood: Increase NAND chip-delay for DNS-320   Andrew Lunn
• [PATCH] ARM: kirkwood: Increase NAND chip-delay for DNS-320   Jamie Lentin
• [PATCH] ARM: kirkwood: Increase NAND chip-delay for DNS-320   Andrew Lunn
• [PATCH] ARM: Kirkwood: new board USI Topkick   Jason Cooper
• [PATCH] ARM: Kirkwood: new board USI Topkick   Andrew Lunn
• [PATCH] ARM: Kirkwood: new board USI Topkick   Jason Cooper
• [PATCH] ARM: mach-imx: Let ARCH_MXC select HAVE_IMX_SRC   Fabio Estevam
• [PATCH] ARM: mach-imx: Support for DryIce RTC in i.MX53   Roland Stigge
• [PATCH] ARM: mach-imx: Support for DryIce RTC in i.MX53   Sascha Hauer
• [PATCH] ARM: mach-kirkwood: add documentation for device tree bindings   Simon Guinot
• [PATCH] ARM: mach-shmobile: Use DT_MACHINE for mackerel   Nobuhiro Iwamatsu
• [PATCH] ARM: mach-shmobile: Use DT_MACHINE for mackerel   Simon Horman
• [PATCH] arm: make FORCE_MAX_ZONEORDER configurable for TI AM33XX   Tony Lindgren
• [PATCH] ARM: mm: Remove unused arm_vmregion priv field   Laurent Pinchart
• [PATCH] ARM: mm: uninitialized warning corrections   Viresh Kumar
• [PATCH] ARM: MMUless Core: Fix insmod error - module relocation out of range   Pratyush Anand
• [PATCH] ARM: MMUless Core: Fix insmod error - module relocation out of range   Catalin Marinas
• [PATCH] ARM: MMUless Core: Fix insmod error - module relocation out of range   Russell King - ARM Linux
• [PATCH] ARM: MMUless Core: Fix insmod error - module relocation out of range   Catalin Marinas
• [PATCH] ARM: multi_v7_defconfig: Add ARCH_MXC   Fabio Estevam
• [PATCH] ARM: multiplatform: Add a defconfig for multi_v5   Tony Prisk
• [PATCH] ARM: multiplatform: Add a defconfig for multi_v5   Arnd Bergmann
• [PATCH] ARM: mv78xx0: correct addr_map_cfg __initdata annotation   Arnd Bergmann
• [PATCH] ARM: mv78xx0: correct addr_map_cfg __initdata annotation   Andrew Lunn
• [PATCH] arm: mvebu: add LED support in defconfig   Thomas Petazzoni
• [PATCH] arm: mvebu: fix typo in machine name for Armada 370/XP   Thomas Petazzoni
• [PATCH] arm: mvebu: move irq controller driver in drivers/irqchip/   Thomas Petazzoni
• [PATCH] arm: mvebu: move irq controller driver in drivers/irqchip/   Rob Herring
• [PATCH] arm: mvebu: move irq controller driver in drivers/irqchip/   Thomas Petazzoni
• [PATCH] arm: mvebu: move irq controller driver in drivers/irqchip/   Arnd Bergmann
• [PATCH] arm: mvebu: move irq controller driver in drivers/irqchip/   Rob Herring
• [PATCH] arm: mvebu: support for the Globalscale Mirabox MBX0001 board   Gregory CLEMENT
• [PATCH] arm: mvebu: support for the Globalscale Mirabox MBX0001 board   Thomas Petazzoni
• [PATCH] arm: mvebu: support for the Globalscale Mirabox MBX0001 board   Sebastian Hesselbarth
• [PATCH] arm: mvebu: support for the Globalscale Mirabox MBX0001 board   Andrew Lunn
• [PATCH] arm: mvebu: support for the Globalscale Mirabox MBX0001 board   Thomas Petazzoni
• [PATCH] arm: mvebu: support for the Globalscale Mirabox MBX0001 board   Thomas Petazzoni
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Thomas Petazzoni
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Andrew Lunn
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Thomas Petazzoni
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Jason Cooper
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Gregory CLEMENT
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Thomas Petazzoni
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Andrew Lunn
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Thomas Petazzoni
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Andrew Lunn
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Thomas Petazzoni
• [PATCH] arm: mvebu: update defconfig with 3.7 changes   Thomas Petazzoni
• [PATCH] arm: mvebu: update defconfig with 3.7 changes   Gregory CLEMENT
• [PATCH] arm: mvebu: update defconfig with 3.7 changes   Andrew Lunn
• [PATCH] arm: mvebu: update defconfig with 3.7 changes   Thomas Petazzoni
• [PATCH] arm: mvebu: update defconfig with 3.7 changes   Arnd Bergmann
• [PATCH] arm: mvebu: update defconfig with 3.7 changes   Jason
• [PATCH] arm: mvebu: update defconfig with 3.7 changes   Arnd Bergmann
• [PATCH] ARM: mxc: platform-mxc-mmc: Fix register region size   Fabio Estevam
• [PATCH] ARM: mxc: platform-mxc-mmc: Fix register region size   Sascha Hauer
• [PATCH] ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board   Gwenhael Goavec-Merou
• [PATCH] ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board   Shawn Guo
• [PATCH] ARM: mxs: Add support for the Armadeus Systems APF28 module   julien.boibessot at free.fr
• [PATCH] ARM: mxs: Add support for the Armadeus Systems APF28 module   Shawn Guo
• [PATCH] ARM: mxs_defconfig: Improve USB related support   Shawn Guo
• [PATCH] ARM: nomadik: fixup some FSMC merge problems   Linus Walleij
• [PATCH] ARM: nomadik: fixup some FSMC merge problems   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: nomadik: fixup some FSMC merge problems   Artem Bityutskiy
• [PATCH] ARM: OMAP1: CGRM: fix omap1_get_reset_sources() return type   Paul Walmsley
• [PATCH] ARM: OMAP1: usb: fix sparse warnings   Paul Walmsley
• [PATCH] ARM: OMAP1: usb: fix sparse warnings   Tony Lindgren
• [PATCH] ARM: OMAP1: usb: fix sparse warnings   Paul Walmsley
• [PATCH] ARM: OMAP1: usb: fix sparse warnings   Tony Lindgren
• [PATCH] ARM: OMAP1: usb: fix sparse warnings   Paul Walmsley
• [PATCH] ARM: OMAP2+: am33xx: Add PRM warm reset/reboot support   Vaibhav Hiremath
• [PATCH] ARM: OMAP2+: am33xx: Add PRM warm reset/reboot support   Paul Walmsley
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Matt Porter
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Matt Porter
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Hebbar, Gururaja
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Joel A Fernandes
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Joel A Fernandes
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Joel A Fernandes
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Hebbar, Gururaja
• [PATCH] ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP   Benoit Cousson
• [PATCH] ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP   Paul Walmsley
• [PATCH] ARM: OMAP2+: gpmc: annotate exit sections properly   Afzal Mohammed
• [PATCH] ARM: OMAP2+: gpmc: annotate exit sections properly   Tony Lindgren
• [PATCH] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Vaibhav Hiremath
• [PATCH] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Afzal Mohammed
• [PATCH] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Matt Porter
• [PATCH] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Matt Porter
• [PATCH] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Matt Porter
• [PATCH] ARM: OMAP2+: gpmc: Fix kernel BUG for DT boot mode   Tony Lindgren
• [PATCH] ARM: OMAP2+: hwmod data: Fix wrong lostcontext_mask for OMAP4 l4_abe   Benoit Cousson
• [PATCH] ARM: OMAP2+: hwmod data: Fix wrong lostcontext_mask for OMAP4 l4_abe   Tony Lindgren
• [PATCH] ARM: OMAP2+: Only write the sysconfig on idle when necessary   Jon Hunter
• [PATCH] ARM: OMAP2+: Only write the sysconfig on idle when necessary   Paul Walmsley
• [PATCH] ARM: OMAP2+: Only write the sysconfig on idle when necessary   Jon Hunter
• [PATCH] ARM: OMAP2+: Only write the sysconfig on idle when necessary   Paul Walmsley
• [PATCH] ARM: OMAP2+: Only write the sysconfig on idle when necessary   Jon Hunter
• [PATCH] ARM: OMAP2+: Only write the sysconfig on idle when necessary   Rajendra Nayak
• [PATCH] ARM: OMAP2+: PM: add missing newline to VC warning message   Kevin Hilman
• [PATCH] ARM: OMAP2+: PM: add missing newline to VC warning message   Nishanth Menon
• [PATCH] ARM: OMAP2+: PM: add missing newline to VC warning message   Tony Lindgren
• [PATCH] ARM: OMAP2+: PM: add missing newline to VC warning message   Nishanth Menon
• [PATCH] ARM: OMAP2+: PM: fix return value check in omap2_set_init_voltage()   Kevin Hilman
• [PATCH] ARM: OMAP2+: PM: MPU DVFS: use generic CPU device for MPU-SS   Kevin Hilman
• [PATCH] ARM: OMAP2+: PM: VP: minor pr_warn updates   Nishanth Menon
• [PATCH] ARM: OMAP2+: remove duplicated declaration of omap4430_init_late   Constantine Shulyupin
• [PATCH] ARM: OMAP2+: remove duplicated declaration of omap4430_init_late   Tony Lindgren
• [PATCH] ARM: OMAP2+: remove duplicated include from board-omap3stalker.c   Wei Yongjun
• [PATCH] ARM: OMAP2+: remove duplicated include from board-omap3stalker.c   Tony Lindgren
• [PATCH] ARM: OMAP2+: SmartReflex: fix return value check in sr_dev_init()   Kevin Hilman
• [PATCH] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Kevin Hilman
• [PATCH] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Tony Lindgren
• [PATCH] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Felipe Balbi
• [PATCH] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Tony Lindgren
• [PATCH] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Kevin Hilman
• [PATCH] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Tony Lindgren
• [PATCH] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Russell King - ARM Linux
• [PATCH] ARM: OMAP3: Beagle: fix OPP customization and initcall ordering   Kevin Hilman
• [PATCH] ARM: OMAP3: Beagle: fix OPP customization and initcall ordering   Tony Lindgren
• [PATCH] ARM: OMAP3: Beagle: fix OPP customization and initcall ordering   Kevin Hilman
• [PATCH] ARM: OMAP3: Beagle: fix OPP customization and initcall ordering   Kevin Hilman
• [PATCH] ARM: OMAP4: Basic default configuration for Pandaboard   Constantine Shulyupin
• [PATCH] ARM: OMAP4: Basic default configuration for Pandaboard   Santosh Shilimkar
• [PATCH] ARM: OMAP4: Fix twd_local_timer_register regression   Tony Lindgren
• [PATCH] ARM: OMAP4: Fix twd_local_timer_register regression   Santosh Shilimkar
• [PATCH] ARM: OMAP4: hwmod data: gpmc main clk   Afzal Mohammed
• [PATCH] ARM: OMAP4: hwmod data: gpmc main clk   Benoit Cousson
• [PATCH] ARM: OMAP4: hwmod data: gpmc main clk   Tony Lindgren
• [PATCH] ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints   Wolfram Sang
• [PATCH] ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints   Jean Pihet
• [PATCH] ARM: OMAP: Fix dependency for OMAP_DEBUG_LEDS   Axel Lin
• [PATCH] ARM: OMAP: Fix dependency for OMAP_DEBUG_LEDS   Russell King - ARM Linux
• [PATCH] ARM: OMAP: fix return value check in beagle_opp_init()   Kevin Hilman
• [PATCH] ARM: OMAP: fix return value check in beagle_opp_init()   Kevin Hilman
• [PATCH] ARM: OMAP: fix return value check in realtime_counter_init()   Wei Yongjun
• [PATCH] ARM: OMAP: fix return value check in realtime_counter_init()   Tony Lindgren
• [PATCH] ARM: OMAP: hsmmc: fix return value check in omap_hsmmc_init_one()   Tony Lindgren
• [PATCH] ARM: OMAP: hwmod: align the SmartReflex fck names   Kevin Hilman
• [PATCH] ARM: OMAP: hwmod: align the SmartReflex fck names   Kevin Hilman
• [PATCH] ARM: OMAP: move old debug-devices.c and debug-leds.c to be OMAP2+ only for now   Paul Walmsley
• [PATCH] ARM: OMAP: move old debug-devices.c and debug-leds.c to be OMAP2+ only for now   Tony Lindgren
• [PATCH] ARM: OMAP: move old debug-devices.c and debug-leds.c to be OMAP2+ only for now   Paul Walmsley
• [PATCH] ARM: OMAP: move old debug-devices.c and debug-leds.c to be OMAP2+ only for now   Paul Walmsley
• [PATCH] ARM: OMAP: move old debug-devices.c and debug-leds.c to be OMAP2+ only for now   Tony Lindgren
• [PATCH] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Felipe Balbi
• [PATCH] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Felipe Balbi
• [PATCH] ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h   Paul Walmsley
• [PATCH] ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h   Tony Lindgren
• [PATCH] ARM: OMAP: OMAP_DEBUG_LEDS needs to select LEDS_CLASS   Tony Lindgren
• [PATCH] ARM: OMAP: omap_device: fix return value check in omap_device_build_ss()   Kevin Hilman
• [PATCH] ARM: OMAP: omap_device: fix return value check in omap_device_build_ss()   Kevin Hilman
• [PATCH] ARM: OMAP: resolve sparse warning concerning debug_card_init()   Paul Walmsley
• [PATCH] ARM: OMAP: resolve sparse warning concerning debug_card_init()   Igor Grinberg
• [PATCH] ARM: OMAP: resolve sparse warning concerning debug_card_init()   Tony Lindgren
• [PATCH] ARM: OMAP: rx51: Fix a section mismatch warn   Tony Lindgren
• [PATCH] ARM: OMAP: SmartReflex: select CONFIG_POWER_SUPPLY in Kconfig   Kevin Hilman
• [PATCH] ARM: Only initialize max_mapnr when using flatmem   Michael Spang
• [PATCH] ARM: PCI: fix missing unlock on error   Wei Yongjun
• [PATCH] ARM: PCI: fix missing unlock on error   Wei Yongjun
• [PATCH] ARM: picoxcell: remove unnecessary header common.h   Tobias Klauser
• [PATCH] ARM: picoxcell: remove unnecessary header common.h   Jamie Iles
• [PATCH] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Linus Walleij
• [PATCH] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Rob Herring
• [PATCH] ARM: PMU: fix runtime PM enable   Jon Hunter
• [PATCH] ARM: PMU: fix runtime PM enable   Will Deacon
• [PATCH] ARM: PMU: fix runtime PM enable   Jon Hunter
• [PATCH] ARM: PMU: fix runtime PM enable   Will Deacon
• [PATCH] ARM: PMU: fix runtime PM enable   Jon Hunter
• [PATCH] ARM: PMU: fix runtime PM enable   Will Deacon
• [PATCH] ARM: PMU: fix runtime PM enable   Jon Hunter
• [PATCH] ARM: PMU: fix runtime PM enable   Kevin Hilman
• [PATCH] ARM: PMU: fix runtime PM enable   Will Deacon
• [PATCH] ARM: PMU: fix runtime PM enable   Jon Hunter
• [PATCH] ARM: proc-v7: Ensure correct instruction set after cpu_reset   Dave Martin
• [PATCH] ARM: proc-v7: Ensure correct instruction set after cpu_reset   Will Deacon
• [PATCH] ARM: proc-v7: Ensure correct instruction set after cpu_reset   Nicolas Pitre
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   viresh kumar
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Santosh Shilimkar
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Rob Herring
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Simon Horman
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Simon Horman
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Santosh Shilimkar
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Pawel Moll
• [PATCH] ARM: Push selects for TWD/SCU into machine entries   Rob Herring
• [PATCH] ARM: pxa: Fix build error caused by sram.h rename   Chris Ball
• [PATCH] ARM: pxa: Fix build error caused by sram.h rename   Arnd Bergmann
• [PATCH] ARM: pxa: Fix build error caused by sram.h rename   Chris Ball
• [PATCH] ARM: pxa: Fix build error caused by sram.h rename   Arnd Bergmann
• [PATCH] ARM: pxa: Fix build error caused by sram.h rename   Mark Brown
• [PATCH] ARM: pxa: Fix build error caused by sram.h rename   Chris Ball
• [PATCH] ARM: pxa: Fix build error caused by sram.h rename   Mark Brown
• [PATCH] ARM: quiet down the non make -s output   Josh Cartwright
• [PATCH] ARM: Remove obsolete reference to subsystem_init().   Robert P. J. Day
• [PATCH] ARM: Remove unnecessary prototype for kobjsize()   Tobias Klauser
• [PATCH] ARM: s3c: mark s3c2440_clk_add as __init_refok   Arnd Bergmann
• [PATCH] ARM: s3c: mark s3c2440_clk_add as __init_refok   Kukjin Kim
• [PATCH] ARM: sa11x0: remove duplicated include from hackkit.c   Wei Yongjun
• [PATCH] ARM: SAMSUNG: Add naming of s3c64xx-spi devices   Heiko Stübner
• [PATCH] ARM: SAMSUNG: Add naming of s3c64xx-spi devices   Sylwester Nawrocki
• [PATCH] ARM: SAMSUNG: Add naming of s3c64xx-spi devices   José Miguel Gonçalves
• [PATCH] ARM: SAMSUNG: Add naming of s3c64xx-spi devices   Kukjin Kim
• [PATCH] ARM: SAMSUNG: use devm_ functions for ADC driver   Eunki Kim
• [PATCH] arm: sched: stop sched_clock() during suspend   Felipe Balbi
• [PATCH] arm: sched: stop sched_clock() during suspend   Felipe Balbi
• [PATCH] arm: sched: stop sched_clock() during suspend   Kevin Hilman
• [PATCH] arm: sched: stop sched_clock() during suspend   Linus Walleij
• [PATCH] arm: sched: stop sched_clock() during suspend   Russell King - ARM Linux
• [PATCH] arm: sched: stop sched_clock() during suspend   Linus Walleij
• [PATCH] arm: sched: stop sched_clock() during suspend   Kevin Hilman
• [PATCH] arm: sched: stop sched_clock() during suspend   Russell King - ARM Linux
• [PATCH] arm: sched: stop sched_clock() during suspend   Felipe Balbi
• [PATCH] ARM: shmobile: leave CONFIG_INOTIFY_USER enabled by default   Guennadi Liakhovetski
• [PATCH] ARM: shmobile: leave CONFIG_INOTIFY_USER enabled by default   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: I/O address abuse cleanup   Simon Horman
• [PATCH] ARM: smp: switch away from the idmap before updating init_mm.mm_count   Will Deacon
• [PATCH] arm: socfpga: fix build break for allyesconfig   Arnd Bergmann
• [PATCH] arm: socfpga: fix build break for allyesconfig   Russell King - ARM Linux
• [PATCH] arm: socfpga: fix build break for allyesconfig   dinguyen at altera.com
• [PATCH] arm: socfpga: fix build break for allyesconfig   Pavel Machek
• [PATCH] arm: socfpga: fix build break for allyesconfig   Russell King - ARM Linux
• [PATCH] arm: socfpga: fix build break for allyesconfig   Pavel Machek
• [PATCH] arm: socfpga: fix build break for allyesconfig   Arnd Bergmann
• [PATCH] arm: socfpga: fix build break for allyesconfig   Pavel Machek
• [PATCH] ARM: sort select statements alphanumerically   Russell King
• [PATCH] ARM: sort select statements alphanumerically   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: sort select statements alphanumerically   Russell King - ARM Linux
• [PATCH] ARM: sort select statements alphanumerically   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: sort select statements alphanumerically   Eric Miao
• [PATCH] ARM: sort select statements alphanumerically   Russell King - ARM Linux
• [PATCH] ARM: sort select statements alphanumerically   Shawn Guo
• [PATCH] ARM: sort select statements alphanumerically   Russell King - ARM Linux
• [PATCH] ARM: sort select statements alphanumerically   Barry Song
• [PATCH] ARM: tegra30: clocks: add AHB and APB clocks   Joseph Lo
• [PATCH] ARM: tegra30: clocks: add AHB and APB clocks   Stephen Warren
• [PATCH] ARM: tegra30: clocks: add AHB and APB clocks   Prashant Gaikwad
• [PATCH] ARM: tegra30: clocks: add AHB and APB clocks   Joseph Lo
• [PATCH] ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE   Joseph Lo
• [PATCH] ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE   Stephen Warren
• [PATCH] ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE   Joseph Lo
• [PATCH] ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE   Stephen Warren
• [PATCH] ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/   Stephen Warren
• [PATCH] ARM: tegra: remove <mach/dma.h>   Stephen Warren
• [PATCH] ARM: tegra: remove <mach/dma.h>   Mark Brown
• [PATCH] ARM: tegra: remove <mach/dma.h>   Stephen Warren
• [PATCH] ARM: tegra: remove unnecessary includes of <mach/*.h>   Stephen Warren
• [PATCH] ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"   Joseph Lo
• [PATCH] ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"   Olof Johansson
• [PATCH] ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"   Stephen Warren
• [PATCH] ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"   Olof Johansson
• [PATCH] ARM: tegra: update *.dts for regulator-compatible deprecation   Stephen Warren
• [PATCH] ARM: tegra: update *.dts for regulator-compatible deprecation   Thierry Reding
• [PATCH] ARM: tegra: update *.dts for regulator-compatible deprecation   Stephen Warren
• [PATCH] ARM: U300: bump IRQs to offset 32   Linus Walleij
• [PATCH] ARM: U300: bump IRQs to offset 32   Linus Walleij
• [PATCH] ARM: U300: bump IRQs to offset 32   Olof Johansson
• [PATCH] ARM: U300: bump IRQs to offset 32   Linus Walleij
• [PATCH] ARM: ux500: 8500: register LCD VSI pinctrl table   Linus Walleij
• [PATCH] ARM: ux500: add DB serial number to entropy pool   Linus Walleij
• [PATCH] ARM: ux500: Introduce cpu_is_u8580()   Linus Walleij
• [PATCH] ARM: ux500: support the HREFP520 board variant   Linus Walleij
• [PATCH] ARM: versatile: fix versatile_defconfig   Arnd Bergmann
• [PATCH] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Paul Walmsley
• [PATCH] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Russell King - ARM Linux
• [PATCH] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Måns Rullgård
• [PATCH] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Russell King - ARM Linux
• [PATCH] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Paul Walmsley
• [PATCH] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Mans Rullgard
• [PATCH] ARM: VIC: use irq_domain_add_simple()   Linus Walleij
• [PATCH] ARM: VIC: use irq_domain_add_simple()   Rob Herring
• [PATCH] arm: vt8500: Fix build warning in uncompress.h [for 3.7]   Tony Prisk
• [PATCH] arm: vt8500: Fix build warning in uncompress.h [for 3.7]   Tony Prisk
• [PATCH] arm: zynq: add system level control register manager   Daniel Borkmann
• [PATCH] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Nick Bowler
• [PATCH] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Josh Cartwright
• [PATCH] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Nick Bowler
• [PATCH] ARM: zynq: move ttc timer code to drivers/clocksource   Josh Cartwright
• [PATCH] ARM: zynq: move ttc timer code to drivers/clocksource   Michal Simek
• [PATCH] ARM: zynq: move ttc timer code to drivers/clocksource   Arnd Bergmann
• [PATCH] ARM: zynq: move ttc timer code to drivers/clocksource   Michal Simek
• [PATCH] ARM: zynq: move ttc timer code to drivers/clocksource   Josh Cartwright
• [PATCH] ARM i.MX27: Fix low reference clock path   Sascha Hauer
• [PATCH] ARM i.MX27: Fix low reference clock path   trem
• [PATCH] ARM i.MX: fix error-valued pointer dereference in clk_register_gate2()   Wei Yongjun
• [PATCH] ARM i.MX: fix error-valued pointer dereference in clk_register_gate2()   Sascha Hauer
• [PATCH] ASoC: ams-delta: Convert to use snd_soc_register_card()   Janusz Krzysztofik
• [PATCH] ASoC: ams-delta: Convert to use snd_soc_register_card()   Mark Brown
• [PATCH] at91sam9m10g45-ek: rename leds to match board   Alexandre Belloni
• [PATCH] at91sam9m10g45-ek: rename leds to match board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91sam9m10g45-ek: rename leds to match board   Alexandre Belloni
• [PATCH] at91sam9m10g45-ek: rename leds to match board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91sam9m10g45-ek: rename leds to match board   Alexandre Belloni
• [PATCH] at91sam9m10g45-ek: rename leds to match board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Christian Gmeiner
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Nishanth Menon
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Dan Murphy
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Russell King - ARM Linux
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Arnd Bergmann
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Dan Murphy
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Dan Murphy
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] CLK: clk-twl6040: Initial clock driver for OMAP4+ McPDM fclk clock   Mike Turquette
• [PATCH] CLK: clk-twl6040: Initial clock driver for OMAP4+ McPDM fclk clock   Péter Ujfalusi
• [PATCH] CLK: clk-twl6040: Initial clock driver for OMAP4+ McPDM fclk clock   Mike Turquette
• [PATCH] clk: fix return value check in bcm2835_init_clocks()   Wei Yongjun
• [PATCH] clk: fix return value check in bcm2835_init_clocks()   Stephen Warren
• [PATCH] clk: fix return value check in bcm2835_init_clocks()   Wei Yongjun
• [PATCH] clk: fix return value check in bcm2835_init_clocks()   Mike Turquette
• [PATCH] clk: fix return value check in of_fixed_clk_setup()   Mike Turquette
• [PATCH] clk: fix return value check in sirfsoc_of_clk_init()   Wei Yongjun
• [PATCH] clk: fix return value check in sirfsoc_of_clk_init()   Mike Turquette
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
• [PATCH] clk: Make the generic clock API available by default   Russell King - ARM Linux
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
• [PATCH] clk: Make the generic clock API available by default   Russell King - ARM Linux
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
• [PATCH] clk: Make the generic clock API available by default   Stephen Warren
• [PATCH] clk: Make the generic clock API available by default   Kelvin Cheung
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
• [PATCH] clk: SPEAr: Vco-pll: Fix compilation warning   Viresh Kumar
• [PATCH] clk: SPEAr: Vco-pll: Fix compilation warning   viresh kumar
• [PATCH] clk: SPEAr: Vco-pll: Fix compilation warning   Mike Turquette
• [PATCH] CLK: vt8500: Fix SDMMC clk special cases   Tony Prisk
• [PATCH] clocksource: arm_generic: use integer math helpers   Linus Walleij
• [PATCH] cpufreq: Avoid calling cpufreq driver's target() routine if target_freq == policy->cur   Viresh Kumar
• [PATCH] cpufreq: Avoid calling cpufreq driver's target() routine if target_freq == policy->cur   Rafael J. Wysocki
• [PATCH] cpufreq: Avoid calling cpufreq driver's target() routine if target_freq == policy->cur   Rafael J. Wysocki
• [PATCH] davinci: check for presence of channel controller on slot alloc   Sekhar Nori
• [PATCH] davinci: check for presence of channel controller on slot alloc   Matt Porter
• [PATCH] davinci: fix return value check by using IS_ERR in tnetv107x_devices_init()   Sekhar Nori
• [PATCH] davinci: fix the uart number in the comment   Sekhar Nori
• [PATCH] davinci: vpbe: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Prabhakar
• [PATCH] davinci: vpbe: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Sekhar Nori
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Vinod Koul
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Marek Vasut
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Marek Vasut
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Marek Vasut
• [PATCH] dma: add new DMA control commands   Russell King - ARM Linux
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Jassi Brar
• [PATCH] dma: add new DMA control commands   Marek Vasut
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Huang Shijie
• [PATCH] dma: add new DMA control commands   Jassi Brar
• [PATCH] DMA: AT91: Get residual bytes in dma buffer   Song, Elen
• [PATCH] DMA: AT91: Get residual bytes in dma buffer   Song, Elen
• [PATCH] dma: ste_dma40: use for_each_set_bit   Akinobu Mita
• [PATCH] dma: ste_dma40: use for_each_set_bit   Linus Walleij
• [PATCH] Documentation: dt: i2c: Update trivial-devices list   AnilKumar Ch
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Lokesh Vutla
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Santosh Shilimkar
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Tony Lindgren
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Tony Lindgren
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Santosh Shilimkar
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Tony Lindgren
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Santosh Shilimkar
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Lokesh Vutla
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Tony Lindgren
• [PATCH] dtb: Add arch-vt8500 board files to arch/arm/boot/dts/Makefile   Tony Prisk
• [PATCH] dtb: Add arch-vt8500 board files to arch/arm/boot/dts/Makefile   Olof Johansson
• [PATCH] fix DEBUG_LL DCC race condition   Johannes Stezenbach
• [PATCH] fix DEBUG_LL DCC race condition   Tony Lindgren
• [PATCH] fix DEBUG_LL DCC race condition   Russell King - ARM Linux
• [PATCH] fix DEBUG_LL DCC race condition   Johannes Stezenbach
• [PATCH] Fix socfpga compilation with early_printk() enabled   Pavel Machek
• [PATCH] Fix socfpga compilation with early_printk() enabled   Arnd Bergmann
• [PATCH] Fix socfpga compilation with early_printk() enabled   Pavel Machek
• [PATCH] Fix socfpga compilation with early_printk() enabled   Arnd Bergmann
• [PATCH] genirq: provide means to retrigger parent   Kevin Hilman
• [PATCH] genirq: provide means to retrigger parent   Russell King - ARM Linux
• [PATCH] genirq: provide means to retrigger parent   Kevin Hilman
• [PATCH] genirq: provide means to retrigger parent   Thomas Gleixner
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Kevin Hilman
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Felipe Balbi
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Kevin Hilman
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Santosh Shilimkar
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Felipe Balbi
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Linus Walleij
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Igor Grinberg
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Grazvydas Ignotas
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Santosh Shilimkar
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Grazvydas Ignotas
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Kevin Hilman
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Santosh Shilimkar
• [PATCH] gpio/omap: fix off-mode bug: clear debounce clock enable mask on disable   Linus Walleij
• [PATCH] gpio/omap: fix off-mode bug: clear debounce settings on free/reset   Jon Hunter
• [PATCH] gpio: clps711x: delete local <mach/gpio.h> header   Linus Walleij
• [PATCH] GPIO: clps711x: Fix direction logic for PORTD   Alexander Shiyan
• [PATCH] GPIO: clps711x: Fix direction logic for PORTD   Linus Walleij
• [PATCH] GPIO: clps711x: Fix return value for gpio_clps711x_get   Alexander Shiyan
• [PATCH] GPIO: clps711x: Fix return value for gpio_clps711x_get   Linus Walleij
• [PATCH] gpio: clps711x: localise <mach/gpio.h> header   Linus Walleij
• [PATCH] gpio: clps711x: localise <mach/gpio.h> header   Alexander Shiyan
• [PATCH] gpio: clps711x: localise <mach/gpio.h> header   Linus Walleij
• [PATCH] gpio: clps711x: localise <mach/gpio.h> header   Alexander Shiyan
• [PATCH] gpio: clps711x: localise <mach/gpio.h> header   Arnd Bergmann
• [PATCH] gpio: clps711x: localise <mach/gpio.h> header   Alexander Shiyan
• [PATCH] gpio: clps711x: localise <mach/gpio.h> header   Linus Walleij
• [PATCH] GPIO: mvebu-gpio: Don't initialize the mask_cache   Andrew Lunn
• [PATCH] GPIO: mvebu-gpio: Don't initialize the mask_cache   Linus Walleij
• [PATCH] GPIO: mvebu-gpio: Don't initialize the mask_cache   Thomas Petazzoni
• [PATCH] GPIO: mvebu-gpio: Don't initialize the mask_cache   Andrew Lunn
• [PATCH] GPIO: mvebu-gpio: Don't initialize the mask_cache   Jamie Lentin
• [PATCH] GPIO: mvebu-gpio: Don't initialize the mask_cache   Michael Walle
• [PATCH] gpio: mvebu: correctly set the value in direction_output()   Thomas Petazzoni
• [PATCH] gpio: mvebu: correctly set the value in direction_output()   Linus Walleij
• [PATCH] GPIO: vt8500: Add extended gpio bank for WM8505/WM8650   Tony Prisk
• [PATCH] GPIO: vt8500: Add extended gpio bank for WM8505/WM8650   Linus Walleij
• [PATCH] i.MX25 clk fixes   Sascha Hauer
• [PATCH] i2c-nomadik: Fixup clock handling   Ulf Hansson
• [PATCH] i2c: at91: add a sanity check on i2c message length   ludovic.desroches at atmel.com
• [PATCH] i2c: at91: add a sanity check on i2c message length   ludovic.desroches
• [PATCH] i2c: at91: add dma support   ludovic.desroches at atmel.com
• [PATCH] i2c: at91: add dma support   Nicolas Ferre
• [PATCH] i2c: at91: add dma support   Russell King - ARM Linux
• [PATCH] i2c: change the id to let the i2c device work   Bo Shen
• [PATCH] i2c: change the id to let the i2c device work   Mark Brown
• [PATCH] i2c: change the id to let the i2c device work   Bo Shen
• [PATCH] i2c: change the id to let the i2c device work   Mark Brown
• [PATCH] i2c: change the id to let the i2c device work   Bo Shen
• [PATCH] i2c: change the id to let the i2c device work   Mark Brown
• [PATCH] i2c: change the id to let the i2c device work   Bo Shen
• [PATCH] i2c: change the id to let the i2c device work   Jean Delvare
• [PATCH] i2c: change the id to let the i2c device work   Bo Shen
• [PATCH] i2c: change the id to let the i2c device work   Jean Delvare
• [PATCH] i2c: change the id to let the i2c device work   Mark Brown
• [PATCH] i2c: change the id to let the i2c device work   Bo Shen
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Bo Shen
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Bo Shen
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Jean Delvare
• [PATCH] i2c: i2c-gpio: fix issue when DT node greater than 1   Bo Shen
• [PATCH] i2c: mv64xxx: Add support Armada-XP SoC   Nobuhiro Iwamatsu
• [PATCH] i2c: mv64xxx: Add support Armada-XP SoC   Thomas Petazzoni
• [PATCH] i2c: mv64xxx: Add support Armada-XP SoC   Sergei Shtylyov
• [PATCH] i2c: mv64xxx: Add support Armada-XP SoC   Nobuhiro Iwamatsu
• [PATCH] i2c: mv64xxx: Add support Armada-XP SoC   Nobuhiro Iwamatsu
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Felipe Balbi
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Shubhrajyoti Datta
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Kevin Hilman
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Felipe Balbi
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Paul Walmsley
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Santosh Shilimkar
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Paul Walmsley
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Santosh Shilimkar
• [PATCH] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti D
• [PATCH] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCH] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti Datta
• [PATCH] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCH] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti Datta
• [PATCH] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCH] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti
• [PATCH] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti Datta
• [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support"   Paul Walmsley
• [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support"   Felipe Balbi
• [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support"   Paul Walmsley
• [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support"   Shubhrajyoti Datta
• [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support"   Felipe Balbi
• [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support"   Felipe Balbi
• [PATCH] Input: omap4-keypad: Add pinctrl support   Sourav Poddar
• [PATCH] lib: decompress_unlzo: Change include file name   Fabio Estevam
• [PATCH] lib: decompress_unlzo: Change include file name   Markus F.X.J. Oberhumer
• [PATCH] MAINTAINERS: Add arm-soc tree entry   Stephen Boyd
• [PATCH] MAINTAINERS: Add arm-soc tree entry   Arnd Bergmann
• [PATCH] mfd/syscon: Fix compilation issue when built for imx   Vikram Narayanan
• [PATCH] mfd/syscon: Fix compilation issue when built for imx   Shawn Guo
• [PATCH] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth H.V
• [PATCH] mfd: ab8500: add devicetree support for fuelgauge   Francesco Lavra
• [PATCH] mfd: wm5102: Mark some more status registers as volatile   Mark Brown
• [PATCH] mm: compaction: Correct the nr_strict_isolated check for CMA   Mel Gorman
• [PATCH] mm: compaction: Correct the nr_strict_isolated check for CMA   Rik van Riel
• [PATCH] mm: compaction: Correct the nr_strict_isolated check for CMA   Minchan Kim
• [PATCH] mmc: at91-mci: remove driver   ludovic.desroches at atmel.com
• [PATCH] mmc: at91-mci: remove driver   Chris Ball
• [PATCH] mmc: at91-mci: remove driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mmc: at91-mci: remove driver   Chris Ball
• [PATCH] mmc: at91-mci: remove driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mmc: at91-mci: remove driver   Chris Ball
• [PATCH] mmc: at91-mci: remove driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mmc: at91-mci: remove driver   ludovic.desroches
• [PATCH] mmc: at91-mci: remove driver   Nicolas Ferre
• [PATCH] MMC: fix sdhci-dove removal   Russell King - ARM Linux
• [PATCH] MMC: fix sdhci-dove removal   Russell King - ARM Linux
• [PATCH] MMC: fix sdhci-dove removal   Russell King - ARM Linux
• [PATCH] MMC: fix sdhci-dove removal   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MMC: fix sdhci-dove removal   Russell King - ARM Linux
• [PATCH] MMC: fix sdhci-dove removal   Chris Ball
• [PATCH] MMC: fix sdhci-dove removal   Russell King - ARM Linux
• [PATCH] MMC: fix sdhci-dove removal   Chris Ball
• [PATCH] MMC: fix sdhci-dove removal   Sebastian Hesselbarth
• [PATCH] MMC: fix sdhci-dove removal   Chris Ball
• [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling   Ulf Hansson
• [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling   Linus Walleij
• [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling   Ulf Hansson
• [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling   Linus Walleij
• [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling   Ulf Hansson
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Ulf Hansson
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Linus Walleij
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Johan Rudholm
• [PATCH] mmc: mxs-mmc: Fix merge issue causing build error   Marek Vasut
• [PATCH] mmc: mxs-mmc: Fix merge issue causing build error   Shawn Guo
• [PATCH] mmc: mxs-mmc: Fix merge issue causing build error   Marek Vasut
• [PATCH] mmc: mxs: fix build regression from mismerge   Arnd Bergmann
• [PATCH] mmc: mxs: fix build regression from mismerge   Marek Vašut
• [PATCH] mmc: mxs: fix build regression from mismerge   Chris Ball
• [PATCH] mmc: mxs: fix build regression from mismerge   Marek Vasut
• [PATCH] mmc: mxs: fix build regression from mismerge   Arnd Bergmann
• [PATCH] mmc: s3cmci: use tasklet_kill in device remove/release process   Xiaotian Feng
• [PATCH] MMCI: fetch pinctrl handle and set default state   Linus Walleij
• [PATCH] MMCI: fetch pinctrl handle and set default state   Ulf Hansson
• [PATCH] MMCI: fetch pinctrl handle and set default state   Russell King - ARM Linux
• [PATCH] MMCI: fetch pinctrl handle and set default state   Linus Walleij
• [PATCH] MTD: atmel_nand: fix compile error when use avr32-atstk1006_defconfig   Josh Wu
• [PATCH] MTD: atmel_nand: fix compile error when use avr32-atstk1006_defconfig   Artem Bityutskiy
• [PATCH] MTD: atmel_nand: fix compile error when use avr32-atstk1006_defconfig   Josh Wu
• [PATCH] mvebu-gpio: Disable blinking when enabling a GPIO for output   Jamie Lentin
• [PATCH] mvebu-gpio: Disable blinking when enabling a GPIO for output   Michael Walle
• [PATCH] mvebu-gpio: Disable blinking when enabling a GPIO for output   Linus Walleij
• [PATCH] mvebu-gpio: Disable blinking when enabling a GPIO for output   Thomas Petazzoni
• [PATCH] mvebu-gpio: Disable blinking when enabling a GPIO for output   Thomas Petazzoni
• [PATCH] mvebu-gpio: Disable blinking when enabling a GPIO for output   Linus Walleij
• [PATCH] net/at91_ether: fix the use of macb structure   Nicolas Ferre
• [PATCH] Nokia N9/N900/N950 -- mention product names   Pavel Machek
• [PATCH] Nokia N9/N900/N950 -- mention product names   Aaro Koskinen
• [PATCH] Nokia N9/N900/N950 -- mention product names   Pavel Machek
• [PATCH] Nokia N9/N900/N950 -- mention product names   Aaro Koskinen
• [PATCH] Nokia N9/N900/N950 -- mention product names   Tony Lindgren
• [PATCH] of: add stub of_get_child_by_name for non-OF builds   Olof Johansson
• [PATCH] of: add stub of_get_child_by_name for non-OF builds   Rob Herring
• [PATCH] of: dma: fix protection of DMA controller data stored by DMA helpers   Jon Hunter
• [PATCH] OMAP4: devices: fixup OMAP4 DMIC platform device error message   Sebastien Guiriec
• [PATCH] OMAP4: devices: fixup OMAP4 DMIC platform device error message   Tony Lindgren
• [PATCH] OMAPDSS: fix return value check in create_dss_pdev()   Tony Lindgren
• [PATCH] pinctrl/nomadik: always use the simple irqdomain   Linus Walleij
• [PATCH] pinctrl/nomadik: always use the simple irqdomain   Lee Jones
• [PATCH] pinctrl/nomadik: db8500: fix kp pin group   Linus Walleij
• [PATCH] pinctrl/nomadik: debugfs display of other alternate-C functions   Linus Walleij
• [PATCH] pinctrl/nomadik: pass DT node to the irqdomain   Linus Walleij
• [PATCH] pinctrl/nomadik: provide stubs for legacy Nomadik   Linus Walleij
• [PATCH] pinctrl/nomadik: provide stubs for legacy Nomadik   Arnd Bergmann
• [PATCH] pinctrl/nomadik: support other alternate-C functions   Linus Walleij
• [PATCH] pinctrl/nomadik: support other alternate-C functions   Arnd Bergmann
• [PATCH] pinctrl/nomadik: update other alternate-C functions on DB8500   Linus Walleij
• [PATCH] pinctrl/nomadik: use irq_create_mapping()   Linus Walleij
• [PATCH] pinctrl/nomadik: use irq_create_mapping()   Stephen Warren
• [PATCH] pinctrl/nomadik: use irq_create_mapping()   Linus Walleij
• [PATCH] pinctrl/nomadik: use irq_create_mapping()   Stephen Warren
• [PATCH] pinctrl/nomadik: use irq_create_mapping()   Linus Walleij
• [PATCH] pinctrl/nomadik: use zero as default irq_start   Linus Walleij
• [PATCH] pinctrl: reserve pins when states are activated   Linus Walleij
• [PATCH] pinctrl: reserve pins when states are activated   Stephen Warren
• [PATCH] pinctrl: reserve pins when states are activated   Linus Walleij
• [PATCH] pinctrl: reserve pins when states are activated   Linus Walleij
• [PATCH] pinctrl: reserve pins when states are activated   Stephen Warren
• [PATCH] pinctrl: sirf: remove sirfsoc_gpio_set_pull function   Arnd Bergmann
• [PATCH] pinctrl: sirf: remove sirfsoc_gpio_set_pull function   Barry Song
• [PATCH] pinctrl: sirf: remove sirfsoc_gpio_set_pull function   Linus Walleij
• [PATCH] pwm: Get rid of HAVE_PWM   Thierry Reding
• [PATCH] pwm: Get rid of HAVE_PWM   Lars-Peter Clausen
• [PATCH] pwm: Get rid of HAVE_PWM   Thierry Reding
• [PATCH] pwm: Get rid of HAVE_PWM   Lars-Peter Clausen
• [PATCH] pwm: Get rid of HAVE_PWM   Thierry Reding
• [PATCH] pwm: Get rid of HAVE_PWM   Shawn Guo
• [PATCH] pwm: Get rid of HAVE_PWM   Eric Miao
• [PATCH] pwm: Get rid of HAVE_PWM   Thierry Reding
• [PATCH] Re: Hardcoded instruction causes certain features to fail on ARM platfrom due to endianness   Fei Yang
• [PATCH] Re: Hardcoded instruction causes certain features to fail on ARM platfrom due to endianness   Dave Martin
• [PATCH] Re: Hardcoded instruction causes certain features to fail on ARM platfrom due to endianness   Fei Yang
• [PATCH] Re: Hardcoded instruction causes certain features to fail on ARM platfrom due to endianness   Dave Martin
• [PATCH] Revert "serial: omap: fix software flow control"   Felipe Balbi
• [PATCH] Revert "serial: omap: fix software flow control"   Tony Lindgren
• [PATCH] Revert "serial: omap: fix software flow control"   Felipe Balbi
• [PATCH] Revert "serial: omap: fix software flow control"   Felipe Balbi
• [PATCH] Revert "serial: omap: fix software flow control"   Greg KH
• [PATCH] Revert "spi/pl022: enable runtime PM"   Ulf Hansson
• [PATCH] Revert "spi/pl022: enable runtime PM"   Mark Brown
• [PATCH] RFC: leds-pwm: don't disable pwm when setting brightness to 0   Uwe Kleine-König
• [PATCH] RFC: leds-pwm: don't disable pwm when setting brightness to 0   Shawn Guo
• [PATCH] serial: i.MX: evaluate linux,stdout-path property   Sascha Hauer
• [PATCH] serial: i.MX: evaluate linux,stdout-path property   Rob Herring
• [PATCH] serial: i.MX: evaluate linux,stdout-path property   Sascha Hauer
• [PATCH] serial: vt8500: fix possible memory leak in vt8500_serial_probe()   Wei Yongjun
• [PATCH] serial: vt8500: fix possible memory leak in vt8500_serial_probe()   Tony Prisk
• [PATCH] slab : allow SLAB_RED_ZONE and SLAB_STORE_USER to work on arm   Matthieu CASTET
• [PATCH] slab : allow SLAB_RED_ZONE and SLAB_STORE_USER to work on arm   Pekka Enberg
• [PATCH] slab : allow SLAB_RED_ZONE and SLAB_STORE_USER to work on arm   Matthieu CASTET
• [PATCH] SoC: AT91: at91sam9g10ek: Impossible to detect the SOC type   Ivan Shugov
• [PATCH] spi/pl022: Activate resourses before deactivate them in suspend   Ulf Hansson
• [PATCH] spi/pl022: Activate resourses before deactivate them in suspend   Ulf Hansson
• [PATCH] spi/pl022: Activate resourses before deactivate them in suspend   Mark Brown
• [PATCH] spi/pl022: Activate resourses before deactivate them in suspend   Mark Brown
• [PATCH] spi/pl022: Activate resourses before deactivate them in suspend   Linus Walleij
• [PATCH] spi/pl022: Activate resourses before deactivate them in suspend   Ulf Hansson
• [PATCH] spi/pl022: Activate resourses before deactivate them in suspend   Alan Stern
• [PATCH] spi/pl022: Activate resourses before deactivate them in suspend   Ulf Hansson
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Felipe Balbi
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Kyungmin Park
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Kukjin Kim
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Russell King - ARM Linux
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Pavel Machek
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Domenico Andreoli
• [PATCH] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH] usb: remove CONFIG_USB_MUSB_HOST etc   Constantine Shulyupin
• [PATCH] usb: remove CONFIG_USB_MUSB_HOST etc   Manjunathappa, Prakash
• [PATCH] usb: remove CONFIG_USB_MUSB_HOST etc   Heiko Schocher
• [PATCH] usb: remove CONFIG_USB_MUSB_HOST etc   Sekhar Nori
• [PATCH] usb: remove CONFIG_USB_MUSB_HOST etc   Constantine Shulyupin
• [PATCH] usb: remove CONFIG_USB_MUSB_HOST etc   Sekhar Nori
• [PATCH] usb: remove CONFIG_USB_MUSB_HOST etc   Felipe Balbi
• [PATCH] usb: remove CONFIG_USB_MUSB_HOST etc   Sekhar Nori
• [PATCH] video: imxfb: Do not crash on reboot   Fabio Estevam
• [PATCH] video: imxfb: Do not crash on reboot   Sascha Hauer
• [PATCH] video: imxfb: Do not crash on reboot   Uwe Kleine-König
• [PATCH] watchdog: Support imx watchdog on SOC_IMX53   Roland Stigge
• [PATCH] watchdog: Support imx watchdog on SOC_IMX53   Sascha Hauer
• [PATCH] xen: resolve merge conflict with 617276307cd4cdb9a95c77efaa3063695af63aa7   Stefano Stabellini
• [PATCH] xen: resolve merge conflict with 617276307cd4cdb9a95c77efaa3063695af63aa7   Konrad Rzeszutek Wilk
• [PATCH for 3.7] dtb: fix interrupt assignment for ehci/uhci on wm8505   Tony Prisk
• [PATCH for 3.7] dtb: fix interrupt assignment for ehci/uhci on wm8505   Tony Prisk
• [PATCH for 3.7] dtb: fix interrupt assignment for ehci/uhci on wm8505   Olof Johansson
• [PATCH for soc] socfpga: map uart into virtual address space so that early_printk() works   Pavel Machek
• [PATCH linux-next] ARM64: dma-mapping: support debug_dma_mapping_error   Shuah Khan
• [PATCH net-next 00/21] treewide: Use consistent api style for address testing   Joe Perches
• [PATCH net-next 00/21] treewide: Use consistent api style for address testing   Eric Dumazet
• [PATCH net-next 03/21] arch: Convert is_<foo>_ether_addr uses to eth_addr_<foo>   Joe Perches
• [PATCH net-next V3 00/10] Support the CPTS as a PTP Hardware Clock   Richard Cochran
• [PATCH net-next V3 01/10] drivers: net: ethernet: cpsw: add multicast address to ALE table   Richard Cochran
• [PATCH net-next V3 02/10] cpsw: rename register banks to match the reference manual   Richard Cochran
• [PATCH net-next V3 03/10] cpsw: add missing fields to the CPSW_SS register bank.   Richard Cochran
• [PATCH net-next V3 04/10] cpsw: remember the silicon version   Richard Cochran
• [PATCH net-next V3 05/10] cpsw: support both silicon versions   Richard Cochran
• [PATCH net-next V3 06/10] cpts: introduce time stamping code and a PTP hardware clock.   Richard Cochran
• [PATCH net-next V3 07/10] cpsw: add a DT field for the cpts offset   Richard Cochran
• [PATCH net-next V3 08/10] cpsw: add a DT field for the active time stamping port   Richard Cochran
• [PATCH net-next V3 09/10] cpts: specify the input clock frequency via DT   Richard Cochran
• [PATCH net-next V3 10/10] cpsw: support the HWTSTAMP ioctl and the CPTS   Richard Cochran
• [PATCH resend 0/10] Get rid of FIQ_START/enable/disable_fiq() + some FIQ cleanups   Anton Vorontsov
• [PATCH RESEND 0/5 v6] gpio: Add block GPIO   Roland Stigge
• [PATCH RESEND 0/9] ARM: davinci: DT boot support for DA850   Sekhar Nori
• [PATCH RESEND 1/2] clk: vt8500: Fix SDMMC clock special cases   Tony Prisk
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Linus Walleij
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Grant Likely
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Grant Likely
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Mark Brown
• [PATCH RESEND 2/5 v6] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RESEND 3/5 v6] gpiolib: Fix default attributes for class   Roland Stigge
• [PATCH RESEND 3/5 v6] gpiolib: Fix default attributes for class   Grant Likely
• [PATCH RESEND 4/5 v6] gpio: Add device tree support to block GPIO API   Roland Stigge
• [PATCH RESEND 4/5 v6] gpio: Add device tree support to block GPIO API   Grant Likely
• [PATCH RESEND 5/5 v6] gpio: Add block gpio to several gpio drivers   Roland Stigge
• [PATCH RESEND] ARM: dm365: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Prabhakar Lad
• [PATCH RESEND] ARM: dm365: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Sergei Shtylyov
• [PATCH RESEND] ARM: dm365: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Prabhakar Lad
• [PATCH RESEND] ARM: pxa27x_keypad: clear pending interrupts on keypad config   Vasily Khoruzhick
• [PATCH RESEND] ARM: pxa27x_keypad: clear pending interrupts on keypad config   Robert Jarzmik
• [PATCH RESEND] ARM: pxa27x_keypad: clear pending interrupts on keypad config   Vasily Khoruzhick
• [PATCH RESEND] ARM: pxa27x_keypad: clear pending interrupts on keypad config   Robert Jarzmik
• [PATCH RESEND] cpufreq: Make sure target freq is within limits   Viresh Kumar
• [PATCH RESEND] cpufreq: Make sure target freq is within limits   Rafael J. Wysocki
• [PATCH RESEND] serial/amba-pl011: use devm_* managed resources   Linus Walleij
• [PATCH RESEND] serial/amba-pl011: use devm_* managed resources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RESEND] serial/amba-pl011: use devm_* managed resources   Domenico Andreoli
• [PATCH RESEND] spi-pxa2xx: fix memory corruption   Vasily Khoruzhick
• [PATCH RESEND] xen/arm: use the __HVC macro   Stefano Stabellini
• [PATCH RFC 0/6 v3] gpio: Add block GPIO   Roland Stigge
• [PATCH RFC 0/7] support the cpts found on am335x devices   Richard Cochran
• [PATCH RFC 00/11 v4] gpio: Add block GPIO   Roland Stigge
• [PATCH RFC 00/15 v5] gpio: Add block GPIO   Roland Stigge
• [PATCH RFC 01/11 v4] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 01/11 v4] gpio: Add a block GPIO API to gpiolib   Ryan Mallon
• [PATCH RFC 01/15 v5] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Greg KH
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Greg KH
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Linus Walleij
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Greg KH
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Linus Walleij
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Greg KH
• [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Greg KH
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Linus Walleij
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Greg KH
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Linus Walleij
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Linus Walleij
• [PATCH RFC 02/15 v5] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 03/11 v4] gpio: Add device tree support to block GPIO API   Roland Stigge
• [PATCH RFC 03/15 v5] gpiolib: Fix default attributes for class   Roland Stigge
• [PATCH RFC 04/11 v4] gpio-max730x: Add block GPIO API   Roland Stigge
• [PATCH RFC 04/15 v5] gpio: Add device tree support to block GPIO API   Roland Stigge
• [PATCH RFC 05/11 v4] gpio-lpc32xx: Add block GPIO API   Roland Stigge
• [PATCH RFC 05/15 v5] gpio-max730x: Add block GPIO API   Roland Stigge
• [PATCH RFC 06/11 v4] gpio-generic: Add block GPIO API   Roland Stigge
• [PATCH RFC 06/15 v5] gpio-lpc32xx: Add block GPIO API   Roland Stigge
• [PATCH RFC 07/11 v4] gpio-pca953x: Add block GPIO API   Roland Stigge
• [PATCH RFC 07/15 v5] gpio-generic: Add block GPIO API   Roland Stigge
• [PATCH RFC 08/11 v4] gpio-em: Add block GPIO API   Roland Stigge
• [PATCH RFC 08/15 v5] gpio-pca953x: Add block GPIO API   Roland Stigge
• [PATCH RFC 09/11 v4] gpio-pl061: Add block GPIO API   Roland Stigge
• [PATCH RFC 09/15 v5] gpio-em: Add block GPIO API   Roland Stigge
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Mark Brown
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Linus Walleij
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Linus Walleij
• [PATCH RFC 1/2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2 v2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/2 v2] gpio: Add a block GPIO API to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 1/2 v2] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/6 v3] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/6 v3] gpio: Add a block GPIO API to gpiolib   Ryan Mallon
• [PATCH RFC 1/6 v3] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/6 v3] gpio: Add a block GPIO API to gpiolib   Linus Walleij
• [PATCH RFC 1/6 v3] gpio: Add a block GPIO API to gpiolib   Ryan Mallon
• [PATCH RFC 1/6 v3] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH RFC 1/7] cpsw: rename register banks to match the reference manual   Richard Cochran
• [PATCH RFC 10/11 v4] gpio-max732x: Add block GPIO API   Roland Stigge
• [PATCH RFC 10/15 v5] gpio-pl061: Add block GPIO API   Roland Stigge
• [PATCH RFC 11/11 v4] gpio-pcf857x: Add block GPIO API   Roland Stigge
• [PATCH RFC 11/15 v5] gpio-max732x: Add block GPIO API   Roland Stigge
• [PATCH RFC 12/15 v5] gpio-pcf857x: Add block GPIO API   Roland Stigge
• [PATCH RFC 13/15 v5] gpio-xilinx: Add block GPIO API   Roland Stigge
• [PATCH RFC 14/15 v5] gpio-vt8500: Add block GPIO API   Roland Stigge
• [PATCH RFC 15/15 v5] gpio-ucb1400: Add block GPIO API   Roland Stigge
• [PATCH RFC 2/2 v2] gpio-max730x: Add block GPIO API   Roland Stigge
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Ryan Mallon
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Greg Kroah-Hartman
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Linus Walleij
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Daniel Glöckner
• [PATCH RFC 2/6 v3] gpio: Add sysfs support to block GPIO API   Linus Walleij
• [PATCH RFC 2/7] cpsw: add missing fields to the CPSW_SS register bank.   Richard Cochran
• [PATCH RFC 3/6 v3] gpio: Add device tree support to block GPIO API   Roland Stigge
• [PATCH RFC 3/7] cpsw: correct the CPSW_PORT register bank declaration   Richard Cochran
• [PATCH RFC 4/6 v3] gpio-max730x: Add block GPIO API   Roland Stigge
• [PATCH RFC 4/7] cpsw: add a common header file for regsiter declarations   Richard Cochran
• [PATCH RFC 5/6 v3] gpio-lpc32xx: Add block GPIO API   Roland Stigge
• [PATCH RFC 5/7] cpts: introduce time stamping code and a PTP hardware clock.   Richard Cochran
• [PATCH RFC 6/6 v3] gpio-generic: Add block GPIO API   Roland Stigge
• [PATCH RFC 6/7] cpsw: add a DT field for the cpts offset   Richard Cochran
• [PATCH RFC 7/7] cpsw: use the time stamping capabilities of the cpts   Richard Cochran
• [PATCH RFC] i2c: omap: Fix the revision register read   Shubhrajyoti D
• [PATCH RFC] i2c: omap: Fix the revision register read   Shubhrajyoti Datta
• [PATCH RFC] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCH RFC] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCH RFC] i2c: omap: Fix the revision register read   Shubhrajyoti
• [PATCH RFC] i2c: omap: Fix the revision register read   Shubhrajyoti
• [PATCH RFC] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCH RFC] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCH RFT] ARM64: dma-mapping: support debug_dma_mapping_error   Shuah Khan
• [PATCH RFT] ARM64: dma-mapping: support debug_dma_mapping_error   Santosh Shilimkar
• [PATCH RFT] ARM64: dma-mapping: support debug_dma_mapping_error   Catalin Marinas
• [PATCH v1 00/14] drm: exynos: hdmi: add dt based support for exynos5 hdmi   Rahul Sharma
• [PATCH v10 0/4] ARM: KDB FIQ debugger   Anton Vorontsov
• [PATCH v1 01/14] media: s5p-hdmi: add HPD GPIO to platform data   RAHUL SHARMA
• [PATCH v1 01/14] media: s5p-hdmi: add HPD GPIO to platform data   Inki Dae
• [PATCH v1 01/14] media: s5p-hdmi: add HPD GPIO to platform data   Rahul Sharma
• [PATCH v1 01/14] media: s5p-hdmi: add HPD GPIO to platform data   Kyungmin Park
• [PATCH v1 02/14] drm: exynos: hdmi: support for platform variants   Rahul Sharma
• [PATCH v1 03/14] drm: exynos: hdmi: fix interrupt handling   Rahul Sharma
• [PATCH v1 04/14] drm: exynos: hdmi: use s5p-hdmi platform data   Rahul Sharma
• [PATCH v1 05/14] drm: exynos: hdmi: turn off HPD interrupt in HDMI chip   Rahul Sharma
• [PATCH v1 06/14] drm: exynos: remove drm hdmi platform data struct   Rahul Sharma
• [PATCH v1 07/14] drm: exynos: hdmi: add support for exynos5 ddc   Rahul Sharma
• [PATCH v1 08/14] drm: exynos: hdmi: add support for exynos5 hdmiphy   Rahul Sharma
• [PATCH v1 09/14] drm: exynos: hdmi: add support for platform variants for mixer   Rahul Sharma
• [PATCH v1 10/14] drm: exynos: hdmi: add support to disable video processor in mixer   Rahul Sharma
• [PATCH v1 11/14] drm: exynos: hdmi: add support for exynos5 mixer   Rahul Sharma
• [PATCH v1 12/14] drm: exynos: hdmi: replace is_v13 with version check in hdmi   Rahul Sharma
• [PATCH v1 13/14] drm: exynos: hdmi: add support for exynos5 hdmi   Rahul Sharma
• [PATCH v1 14/14] drm: exynos: hdmi: remove drm common hdmi platform data struct   Rahul Sharma
• [PATCHv1] arm:socfpga: Enable SMP for socfpga   Rob Herring
• [PATCHv1] arm:socfpga: Enable SMP for socfpga   dinguyen at altera.com
• [PATCHv1] arm:socfpga: Enable SMP for socfpga   Pavel Machek
• [PATCHv1] arm:socfpga: Enable SMP for socfpga   Rob Herring
• [PATCHv1] arm:socfpga: Enable SMP for socfpga   Dinh Nguyen
• [PATCHv1] arm:socfpga: Enable SMP for socfpga   Pavel Machek
• [PATCHv1] arm:socfpga: Enable SMP for socfpga   Rob Herring
• [PATCH v2 0/2] Add DMA and device tree support to the flash controller FLCTL   Bastian Hecht
• [PATCH v2 0/2] Add DMA and device tree support to the flash controller FLCTL   Artem Bityutskiy
• [PATCH v2 0/2] Add DMA and device tree support to the flash controller FLCTL   Bastian Hecht
• [PATCH v2 0/2] Add DMA and device tree support to the flash controller FLCTL   Artem Bityutskiy
• [PATCH v2 0/2] Add DMA and device tree support to the flash controller FLCTL   Bastian Hecht
• [PATCH v2 0/2] ARM: exynos: Enable TMU support in exynos platforms   Amit Daniel Kachhap
• [PATCH v2 0/2] ARM: exynos: Enable TMU support in exynos platforms   Kukjin Kim
• [PATCH V2 0/2] ARM: OMAP2+: Add device-tree support for 32kHz counter   Jon Hunter
• [PATCH v2 0/2] ARM: OMAP: hwmod/omapd_device: Fix for resource handling in DT boot   Peter Ujfalusi
• [PATCH v2 0/2] ARM: OMAP: hwmod/omapd_device: Fix for resource handling in DT boot   Sebastien Guiriec
• [PATCH v2 0/2] DT EHCI support for Kirkwood.   Andrew Lunn
• [PATCH v2 0/2] DT EHCI support for Kirkwood.   Jason Cooper
• [PATCH V2 0/2] fix and improvement of flush(_kernel)_dcache_page()   Simon Baatz
• [PATCH v2 0/2] Update ehci-platform driver to support devicetree   Tony Prisk
• [PATCH V2 0/3] Add clock framework for armada 370/XP   Gregory CLEMENT
• [PATCH V2 0/3] Add clock framework for armada 370/XP   Mike Turquette
• [PATCH V2 0/3] Add clock framework for armada 370/XP   Gregory CLEMENT
• [PATCHv2 0/3] Add spidev to the CFA-10049   Maxime Ripard
• [PATCH V2 0/3] ARM: dts: omap5: EMIF and LPDDR2 device tree data   Lokesh Vutla
• [PATCH v2 0/3] make cadence ethernet drivers build on any architecture   Joachim Eastwood
• [PATCH v2 0/3] ocp2scp: add non-dt support   Kishon Vijay Abraham I
• [PATCH v2 0/3] serial: mxs-auart: add DMA support for auart in mx28   Huang Shijie
• [PATCH V2 0/3] spi: spi-pl022: Fixup use of runtime pm   Ulf Hansson
• [PATCH V2 0/3] spi: spi-pl022: Fixup use of runtime pm   Linus Walleij
• [PATCH V2 0/3] spi: spi-pl022: Fixup use of runtime pm   Mark Brown
• [PATCH V2 0/3] spi: spi-pl022: Fixup use of runtime pm   Ulf Hansson
• [PATCH v2 0/4] Add DT support for Network Space v2 and parents   Simon Guinot
• [PATCH v2 0/4] Add DT support for Network Space v2 and parents   Andrew Lunn
• [PATCH v2 0/4] Add DT support for Network Space v2 and parents   Jason Cooper
• [PATCH V2 0/4] Adding SATA support for Armada 370/XP   Gregory CLEMENT
• [PATCH V2 0/4] Adding SATA support for Armada 370/XP   Andrew Lunn
• [PATCH V2 0/4] Adding SATA support for Armada 370/XP   Thomas Petazzoni
• [PATCH V2 0/4] Adding SATA support for Armada 370/XP   Andrew Lunn
• [PATCH V2 0/4] Adding SATA support for Armada 370/XP   Gregory CLEMENT
• [PATCH v2 0/4] ARM: dts: Update OMAP5 with address space and interrupts   Sebastien Guiriec
• [PATCH v2 0/4] ARM: EXYNOS: Power domain DT support extension   Tomasz Figa
• [PATCH V2 0/4] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH v2 0/4] zynq subarch cleanups   Josh Cartwright
• [PATCH v2 0/4] zynq subarch cleanups   Arnd Bergmann
• [PATCH v2 0/4] zynq subarch cleanups   Rob Herring
• [PATCH v2 0/5] ARM: Add support for Broadcom BCM476x SoCs   Domenico Andreoli
• [PATCH v2 0/5] ARM: tegra: enable wlan for t20 and t30   Stephen Warren
• [PATCH v2 0/5] clk: exynos4: migrate to common clock framework   Thomas Abraham
• [PATCH v2 0/5] KVM/ARM Architected Timers support   Christoffer Dall
• [PATCH v2 0/5] Move GIC and VIC to drivers/irqchip   Rob Herring
• [PATCH V2 0/5] Pinctrl: SPEAr: Add support for plgpio driver   Viresh Kumar
• [PATCH V2 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH v2 0/6] Adding support for SATA in EXYNO5   Vasanth Ananthan
• [PATCH v2 0/6] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH v2 0/6] ARM: EXYNOS: Add secure firmware support   Kyungmin Park
• [PATCH v2 0/6] ARM: EXYNOS: Add secure firmware support   Olof Johansson
• [PATCH v2 0/6] ARM: EXYNOS: Add secure firmware support   Olof Johansson
• [PATCH v2 0/6] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH v2 0/6] ARM: EXYNOS: Add secure firmware support   Kukjin Kim
• [PATCH V2 0/7] ARM: OMAP2+: Add device-tree support for timers   Tony Lindgren
• [PATCH V2 0/7] ARM: OMAP: Move plat/dma*.h, omap-secure.h headers as part of single zImage work   Lokesh Vutla
• [PATCH V2 0/7] ARM: OMAP: Move plat/dma*.h,omap-secure.h headers as part of single zImage work   Tony Lindgren
• [PATCH V2 0/7] ARM: tegra30: cpuidle: add LP2 support   Joseph Lo
• [PATCH V2 0/7] ARM: tegra30: cpuidle: add LP2 support   Joseph Lo
• [PATCH v2 0/7] crypto: omap-sham updates   Mark A. Greer
• [PATCH v2 0/7] I2C patches for v3.8 merge window   Felipe Balbi
• [PATCH V2 0/7] support the cpts found on am335x devices   Richard Cochran
• [PATCH V2 0/7] support the cpts found on am335x devices   N, Mugunthan V
• [PATCH V2 0/7] support the cpts found on am335x devices   Richard Cochran
• [PATCH V2 0/7] support the cpts found on am335x devices   N, Mugunthan V
• [PATCH V2 0/7] support the cpts found on am335x devices   Richard Cochran
• [PATCH V2 0/7] support the cpts found on am335x devices   N, Mugunthan V
• [PATCH V2 0/7] support the cpts found on am335x devices   Richard Cochran
• [PATCH v2 0/7] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v2 0/7] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v2 0/7] uio_pruss cleanup and platform support   Hebbar, Gururaja
• [PATCH v2 0/7] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v2 0/7] uio_pruss cleanup and platform support   Hebbar, Gururaja
• [PATCH v2 0/8] ARM: mostly harmless gcc warnings   Arnd Bergmann
• [PATCH v2 0/9] add EDO feature for gpmi-nand driver   Marek Vasut
• [PATCH v2 0/9] add EDO feature for gpmi-nand driver   Marek Vasut
• [PATCH v2 0/9] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Nicolas Ferre
• [PATCH v2 0/9] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   David Miller
• [PATCH v2 0/9] support pinctrl single in arch pxa/mmp   Haojian Zhuang
• [PATCH v2 00/10] KVM/ARM Implementation   Christoffer Dall
• [PATCH v2 00/10] KVM/ARM Implementation   Christoffer Dall
• [PATCH v2 00/10] KVM/ARM vGIC support   Christoffer Dall
• [PATCH v2 00/14] KVM/ARM Implementation   Christoffer Dall
• [PATCH v2 00/14] KVM/ARM Implementation   Marcelo Tosatti
• [PATCH v2 00/14] OMAP-GPMC related cleanup for common zImage   Afzal Mohammed
• [PATCH v2 00/14] OMAP-GPMC related cleanup for common zImage   Mohammed, Afzal
• [PATCH v2 00/14] OMAP-GPMC related cleanup for common zImage   Ivan Djelic
• [PATCH v2 00/14] OMAP-GPMC related cleanup for common zImage   Mohammed, Afzal
• [PATCH v2 00/14] OMAP-GPMC related cleanup for common zImage   Tony Lindgren
• [PATCH v2 00/14] OMAP-GPMC related cleanup for common zImage   Afzal Mohammed
• [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements   Tomasz Figa
• [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements   Kyungmin Park
• [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements   Thomas Abraham
• [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements   Linus Walleij
• [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements   Linus Walleij
• [PATCH v2 01/10] ARM: KVM: Keep track of currently running vcpus   Christoffer Dall
• [PATCH v2 01/10] ARM: KVM: Keep track of currently running vcpus   Christoffer Dall
• [PATCH v2 01/13] clk: davinci - add Main PLL clock driver   Sekhar Nori
• [PATCH v2 01/14] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH v2 01/14] ARM: OMAP2+: gpmc: annotate exit sections properly   Afzal Mohammed
• [PATCH v2 02/10] ARM: KVM: Initial VGIC infrastructure support   Christoffer Dall
• [PATCH v2 02/10] ARM: KVM: Initial VGIC infrastructure support   Christoffer Dall
• [PATCH v2 02/14] ARM: Section based HYP idmap   Christoffer Dall
• [PATCH v2 02/14] mtd: onenand: omap: cleanup gpmc dependency   Afzal Mohammed
• [PATCH v2 03/10] ARM: KVM: Initial VGIC MMIO support code   Christoffer Dall
• [PATCH v2 03/10] ARM: KVM: Initial VGIC MMIO support code   Christoffer Dall
• [PATCH v2 03/14] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v2 03/14] mtd: nand: omap: free region as per resource size   Afzal Mohammed
• [PATCH v2 04/10] ARM: KVM: VGIC distributor handling   Christoffer Dall
• [PATCH v2 04/10] ARM: KVM: VGIC distributor handling   Christoffer Dall
• [PATCH v2 04/13] clk: davinci - common clk driver initialization   Sekhar Nori
• [PATCH v2 04/14] KVM: ARM: Initial skeleton to compile KVM support   Christoffer Dall
• [PATCH v2 04/14] mtd: nand: omap: read nand using register address   Afzal Mohammed
• [PATCH v2 05/10] ARM: KVM: VGIC virtual CPU interface management   Christoffer Dall
• [PATCH v2 05/10] ARM: KVM: VGIC virtual CPU interface management   Christoffer Dall
• [PATCH v2 05/13] clk: Versatile Express clock generators ("osc") driver   Mike Turquette
• [PATCH v2 05/14] ARM: OMAP2+: onenand: connected soc info in pdata   Afzal Mohammed
• [PATCH v2 05/14] KVM: ARM: Hypervisor inititalization   Christoffer Dall
• [PATCH v2 06/10] ARM: KVM: VGIC interrupt injection   Christoffer Dall
• [PATCH v2 06/14] KVM: ARM: Memory virtualization setup   Christoffer Dall
• [PATCH v2 06/14] KVM: ARM: Memory virtualization setup   Min-gyu Kim
• [PATCH v2 06/14] KVM: ARM: Memory virtualization setup   Christoffer Dall
• [PATCH v2 06/14] mtd: onenand: omap: use pdata info instead of cpu_is   Afzal Mohammed
• [PATCH v2 06/14] mtd: onenand: omap: use pdata info instead of cpu_is   Paul Walmsley
• [PATCH v2 06/14] mtd: onenand: omap: use pdata info instead of cpu_is   Paul Walmsley
• [PATCH v2 06/14] mtd: onenand: omap: use pdata info instead of cpu_is   Tony Lindgren
• [PATCH v2 06/14] mtd: onenand: omap: use pdata info instead of cpu_is   Tony Lindgren
• [PATCH v2 06/14] mtd: onenand: omap: use pdata info instead of cpu_is   Afzal Mohammed
• [PATCH v2 07/10] ARM: KVM: VGIC control interface world switch   Christoffer Dall
• [PATCH v2 07/14] ARM: OMAP2+: onenand: header cleanup   Afzal Mohammed
• [PATCH v2 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Christoffer Dall
• [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Will Deacon
• [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Marc Zyngier
• [PATCH v2 08/10] ARM: KVM: VGIC initialisation code   Christoffer Dall
• [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use   Jon Hunter
• [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use   Paul Walmsley
• [PATCH v2 08/14] ARM: OMAP2+: nand: header cleanup   Afzal Mohammed
• [PATCH v2 08/14] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH v2 09/10] ARM: KVM: vgic: reduce the number of vcpu kick   Christoffer Dall
• [PATCH v2 09/13] ARM: davinci - update the dm644x soc code to use common clk drivers   Sekhar Nori
• [PATCH v2 09/13] ARM: davinci - update the dm644x soc code to use common clk drivers   Karicheri, Muralidharan
• [PATCH v2 09/13] ARM: davinci - update the dm644x soc code to use common clk drivers   Sekhar Nori
• [PATCH v2 09/13] ARM: davinci - update the dm644x soc code to use common clk drivers   Karicheri, Muralidharan
• [PATCH v2 09/13] ARM: davinci - update the dm644x soc code to use common clk drivers   Sekhar Nori
• [PATCH v2 09/14] KVM: ARM: Emulation framework and CP15 emulation   Christoffer Dall
• [PATCH v2 09/14] mtd: nand: omap: bring in gpmc nand macros   Afzal Mohammed
• [PATCH V2 1/2] ARM: dts: OMAP: Add counter-32k nodes   Jon Hunter
• [PATCH v2 1/2] ARM: exynos4: Add devicetree node for TMU driver   Amit Daniel Kachhap
• [PATCH v2 1/2] ARM: exynos4: Add devicetree node for TMU driver   Kukjin Kim
• [PATCH v2 1/2] ARM: exynos4: Add devicetree node for TMU driver   Amit Daniel Kachhap
• [PATCH v2 1/2] ARM: imx: clk: Split SSI clock into 'ipg' and 'per'   Fabio Estevam
• [PATCH v2 1/2] ARM: imx: clk: Split SSI clock into 'ipg' and 'per'   Sascha Hauer
• [PATCH v2 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding   Andrew Lunn
• [PATCH v2 1/2] ARM: multi_v7_defconfig: Add ARCH_MXC   Fabio Estevam
• [PATCH v2 1/2] ARM: multi_v7_defconfig: Add ARCH_MXC   Rob Herring
• [PATCH v2 1/2] ARM: OMAP: hwmod: Add possibility to count hwmod resources based on type   Peter Ujfalusi
• [PATCH v2 1/2] ARM: OMAP: hwmod: Add possibility to count hwmod resources based on type   Cousson, Benoit
• [PATCH V2 1/2] ARM: remove unnecessary flush of anon pages in flush_dcache_page()   Simon Baatz
• [PATCH V2 1/2] ARM: remove unnecessary flush of anon pages in flush_dcache_page()   Catalin Marinas
• [PATCH V2 1/2] ARM: remove unnecessary flush of anon pages in flush_dcache_page()   Simon Baatz
• [PATCH V2 1/2] ARM: remove unnecessary flush of anon pages in flush_dcache_page()   Catalin Marinas
• [PATCH v2 1/2] ARM: shmobile: Add support OF for INTC of shmobile   Nobuhiro Iwamatsu
• [PATCH V2 1/2] ARM: tegra: dt: add L2 cache controller   Joseph Lo
• [PATCH V2 1/2] ARM: tegra: dt: add L2 cache controller   Stephen Warren
• [PATCH v2 1/2] mtd: sh_flctl: Add DMA capabilty   Bastian Hecht
• [PATCH v2 1/2] USB: Update EHCI-platform driver to devicetree.   Tony Prisk
• [PATCH v2 1/2] USB: Update EHCI-platform driver to devicetree.   Alan Stern
• [PATCH V2 1/3] ARM: dts: omap5-evm: Fix size of memory defined for EVM   Lokesh Vutla
• [PATCH v2 1/3] ARM: Kirkwood: Remove unused includes   Andrew Lunn
• [PATCH v2 1/3] ARM: Kirkwood: Remove unused includes   Jason Cooper
• [PATCH V2 1/3] ARM: tegra: simplify DEBUG_LL UART selection options   Stephen Warren
• [PATCH V2 1/3] clk: mvebu: add armada-370-xp specific clocks   Gregory CLEMENT
• [PATCH V2 1/3] clk: mvebu: add armada-370-xp specific clocks   Mike Turquette
• [PATCH V2 1/3] clk: mvebu: add armada-370-xp specific clocks   Gregory CLEMENT
• [PATCHv2 1/3] clk: wm831x: Fix clk_register() error code checking   Mike Turquette
• [PATCH V2 1/3] dmaengine: dw_dmac: Update documentation style comments for dw_dma_platform_data   Viresh Kumar
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Kishon Vijay Abraham I
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Tony Lindgren
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Tony Lindgren
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Felipe Balbi
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Tony Lindgren
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Felipe Balbi
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Felipe Balbi
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Tony Lindgren
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Felipe Balbi
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   kishon
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   Felipe Balbi
• [PATCH v2 1/3] drivers: bus: ocp2scp: add pdata support   kishon
• [PATCH v2 1/3] net/cadence: get rid of HAVE_NET_MACB   Joachim Eastwood
• [PATCH V2 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Ulf Hansson
• [PATCH V2 1/3] Revert "spi/pl022: fix spi-pl022 pm enable at probe"   Mark Brown
• [PATCH v2 1/3] serial: mxs-auart: distinguish the different SOCs   Huang Shijie
• [PATCH v2 1/4] ARM: annotate VMALLOC_END definition with _AC   Josh Cartwright
• [Patch v2 1/4] ARM: at91: atmel-ssc: add platform device id table   Bo Shen
• [Patch v2 1/4] ARM: at91: atmel-ssc: add platform device id table   Nicolas Ferre
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Sebastien Guiriec
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Jon Hunter
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Benoit Cousson
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Jon Hunter
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Benoit Cousson
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Sebastien Guiriec
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Mitch Bradley
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Jon Hunter
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Mitch Bradley
• [PATCH v2 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Benoit Cousson
• [PATCH v2 1/4] ARM: EXYNOS: pm_domain: Detect domain state on registration from DT   Tomasz Figa
• [PATCH V2 1/4] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Gregory CLEMENT
• [PATCH V2 1/4] ARM: tegra: dts: add slink controller dt entry   Laxman Dewangan
• [PATCH V2 1/4] ARM: tegra: dts: add slink controller dt entry   Stephen Warren
• [PATCH v2 1/4] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCH v2 1/4] irqchip: add basic infrastructure   Rob Herring
• [PATCH v2 1/4] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCH v2 1/4] irqchip: add basic infrastructure   Rob Herring
• [PATCH v2 1/4] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCH v2 1/4] leds: leds-ns2: add device tree binding   Simon Guinot
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Rob Herring
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Baruch Siach
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Francois Romieu
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Jason Cooper
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit   Jason Cooper
• [PATCH v2 1/5] [media] omap3isp: Fix compilation error in ispreg.h   Ido Yariv
• [PATCH v2 1/5] [media] omap3isp: Fix compilation error in ispreg.h   Tony Lindgren
• [PATCH v2 1/5] [media] omap3isp: Fix compilation error in ispreg.h   Mauro Carvalho Chehab
• [PATCH v2 1/5] [media] omap3isp: Fix compilation error in ispreg.h   Tony Lindgren
• [PATCH v2 1/5] [media] omap3isp: Fix compilation error in ispreg.h   Laurent Pinchart
• [PATCH v2 1/5] ARM: arch_timers: switch to physical timers if HYP mode is available   Christoffer Dall
• [PATCH v2 1/5] ARM: bcm476x: Add platform infrastructure   Domenico Andreoli
• [PATCH v2 1/5] ARM: bcm476x: Add platform infrastructure   Arnd Bergmann
• [PATCH v2 1/5] ARM: bcm476x: Add platform infrastructure   Domenico Andreoli
• [PATCH v2 1/5] ARM: bcm476x: Add platform infrastructure   Arnd Bergmann
• [PATCH v2 1/5] ARM: gic: move register definitions into .c file   Rob Herring
• [PATCH v2 1/5] ARM: gic: move register definitions into .c file   Russell King - ARM Linux
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH v2 1/5] ARM: PXA: Add z2-usb-switch driver   Vasily Khoruzhick
• [PATCH v2 1/5] ARM: PXA: Add z2-usb-switch driver   Marko Katić
• [PATCH v2 1/5] ARM: PXA: Add z2-usb-switch driver   Vasily Khoruzhick
• [PATCH v2 1/5] ARM: PXA: Add z2-usb-switch driver   Marek Vasut
• [PATCH v2 1/5] ARM: PXA: Add z2-usb-switch driver   Vasily Khoruzhick
• [PATCH v2 1/5] ARM: PXA: Add z2-usb-switch driver   Marek Vasut
• [PATCH v2 1/5] ARM: PXA: Add z2-usb-switch driver   Vasily Khoruzhick
• [PATCH v2 1/5] ARM: PXA: Add z2-usb-switch driver   Marek Vasut
• [PATCH v2 1/5] ARM: zynq: dts: split up device tree   Josh Cartwright
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Thomas Abraham
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Sylwester Nawrocki
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Thomas Abraham
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Mike Turquette
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Sylwester Nawrocki
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Tomasz Figa
• [PATCH V2 1/5] Revert "pinctrl: remove pinctrl_remove_gpio_range"   Viresh Kumar
• [PATCH v2 1/6] ARM: davinci: Changed pr_warning() to pr_warn()   Sergei Shtylyov
• [PATCH v2 1/6] ARM: davinci: Changed pr_warning() to pr_warn()   Tivy, Robert
• [PATCH v2 1/6] ARM: davinci: Changed pr_warning() to pr_warn()   Sekhar Nori
• [PATCH v2 1/6] ARM: EXYNOS5: Clock settings for SATA and SATA PHY   Vasanth Ananthan
• [PATCH v2 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH V2 1/7] ARM: OMAP: DMA: Removing plat/dma-44xx.h   Lokesh Vutla
• [PATCH V2 1/7] ARM: tegra: cpuidle: separate cpuidle driver for different chips   Joseph Lo
• [PATCH V2 1/7] cpsw: rename register banks to match the reference manual   Richard Cochran
• [PATCH v2 1/7] i2c: omap: no need to access platform_device   Felipe Balbi
• [PATCH v2 1/7] i2c: omap: no need to access platform_device   Santosh Shilimkar
• [PATCH v2 1/8] ARM: hw_breakpoint: only clear OS lock when implemented on v7   Will Deacon
• [PATCH v2 1/8] SCSI: ARM: ncr5380/oak uses no interrupts   Arnd Bergmann
• [PATCH v2 1/9] ARM: mmp: select pinctrl driver   Haojian Zhuang
• [PATCH v2 1/9] ARM: mmp: select pinctrl driver   Linus Walleij
• [PATCH v2 10/10] ARM: KVM: Add VGIC configuration option   Christoffer Dall
• [PATCH v2 10/14] ARM: OMAP2+: nand: bch capability check   Afzal Mohammed
• [PATCH v2 10/14] KVM: ARM: User space API for getting/setting co-proc registers   Christoffer Dall
• [PATCH v2 11/14] ARM: OMAP2+: gpmc: nand register helper bch update   Afzal Mohammed
• [PATCH v2 11/14] KVM: ARM: Demux CCSIDR in the userspace API   Christoffer Dall
• [PATCHv2 12/12] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init   Paul Walmsley
• [PATCHv2 12/12] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init   Péter Ujfalusi
• [PATCH v2 12/14] KVM: ARM: VFP userspace interface   Christoffer Dall
• [PATCH v2 12/14] mtd: nand: omap: handle gpmc bch[48]   Afzal Mohammed
• [PATCH v2 13/14] ARM: OMAP2+: gpmc: remove exported nand functions   Afzal Mohammed
• [PATCH v2 13/14] KVM: ARM: Handle guest faults in KVM   Christoffer Dall
• [PATCH v2 14/14] ARM: OMAP2+: gpmc: localize gpmc header   Afzal Mohammed
• [PATCH v2 14/14] KVM: ARM: Handle I/O aborts   Christoffer Dall
• [PATCH v2 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Fabio Estevam
• [PATCH v2 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   javier Martin
• [PATCH v2 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Fabio Estevam
• [PATCH v2 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Gaëtan Carlier
• [PATCH v2 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   javier Martin
• [PATCH v2 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Russell King - ARM Linux
• [PATCH v2 2/2] ARM: exynos5: Add devicetree node for TMU driver   Amit Daniel Kachhap
• [PATCH v2 2/2] ARM: Kirkwood: Convert all DT boards to EHCI via DT.   Andrew Lunn
• [PATCH V2 2/2] ARM: OMAP2+: Add device-tree support for 32kHz counter   Jon Hunter
• [PATCH v2 2/2] ARM: OMAP: omap_device: Correct resource handling for DT boot   Peter Ujfalusi
• [PATCH V2 2/2] ARM: tegra: common: using OF api for L2 cache init   Joseph Lo
• [PATCH v2 2/2] ARM: topdown mmap support   zhangfei gao
• [PATCH v2 2/2] ARM: topdown mmap support   Rob Herring
• [PATCH v2 2/2] mfd: Kconfig: Let MFD_SYSCON select REGMAP   Fabio Estevam
• [PATCH v2 2/2] mfd: Kconfig: Let MFD_SYSCON select REGMAP   Mark Brown
• [PATCH v2 2/2] mtd: sh_flctl: Add device tree support   Bastian Hecht
• [PATCH v2 2/2] SH: intc: Add support OF of IRQ   Nobuhiro Iwamatsu
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Tony Prisk
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Florian Fainelli
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Rob Herring
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Sebastian Andrzej Siewior
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Florian Fainelli
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Florian Fainelli
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Florian Fainelli
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Rob Herring
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Florian Fainelli
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Mitch Bradley
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Sebastian Andrzej Siewior
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Stephen Warren
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Sebastian Andrzej Siewior
• [PATCH v2 2/2] USB: doc: Binding document for ehci-platform driver   Alan Stern
• [PATCH V2 2/3] ARM: dts: omap5: EMIF device tree data for OMAP5 boards   Lokesh Vutla
• [PATCH v2 2/3] ARM: Kirkwood: Fix sparse warnings.   Andrew Lunn
• [PATCH v2 2/3] ARM: OMAP4: add _dev_attr_ to ocp2scp for representing usb_phy   Kishon Vijay Abraham I
• [PATCH v2 2/3] ARM: OMAP4: add _dev_attr_ to ocp2scp for representing usb_phy   Tony Lindgren
• [PATCH v2 2/3] ARM: OMAP4: add _dev_attr_ to ocp2scp for representing usb_phy   Tony Lindgren
• [PATCH V2 2/3] ARM: tegra: make debug-macro.S work standalone   Stephen Warren
• [PATCH V2 2/3] clk: armada-370-xp: add support for clock framework   Gregory CLEMENT
• [PATCH V2 2/3] clk: armada-370-xp: add support for clock framework   Mike Turquette
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Andy Shevchenko
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Andy Shevchenko
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V2 2/3] dmaengine: dw_dmac: Enhance device tree support   Andy Shevchenko
• [PATCH v2 2/3] net/at91_ether: select MACB in Kconfig   Joachim Eastwood
• [PATCH V2 2/3] Revert "spi/pl022: enable runtime PM"   Ulf Hansson
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Vinod Koul
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Vinod Koul
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Vinod Koul
• [Patch v2 2/4] ARM: at91: atmel-ssc: add device tree support   Bo Shen
• [Patch v2 2/4] ARM: at91: atmel-ssc: add device tree support   Nicolas Ferre
• [PATCH v2 2/4] arm: bcm2835: convert to the irqchip infrastructure   Thomas Petazzoni
• [PATCH v2 2/4] ARM: dts: omap5: Update I2C with address space and interrupts   Sebastien Guiriec
• [PATCH v2 2/4] ARM: EXYNOS: pm_domain: Fix power domain name initialization   Tomasz Figa
• [PATCH V2 2/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP   Gregory CLEMENT
• [PATCH V2 2/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP   Jason Cooper
• [PATCH V2 2/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP   Andrew Lunn
• [PATCH V2 2/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP   Gregory CLEMENT
• [PATCH V2 2/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP   Andrew Lunn
• [PATCH V2 2/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP   Thomas Petazzoni
• [PATCH V2 2/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP   Jason Cooper
• [PATCH V2 2/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP   Gregory CLEMENT
• [PATCH V2 2/4] ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt   Laxman Dewangan
• [PATCH V2 2/4] ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt   Stephen Warren
• [PATCH v2 2/4] net: mvneta: update MAINTAINERS file for the mvneta maintainers   Thomas Petazzoni
• [PATCH v2 2/4] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v2 2/4] zynq: move static peripheral mappings   Arnd Bergmann
• [PATCH v2 2/4] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v2 2/4] zynq: move static peripheral mappings   Arnd Bergmann
• [PATCH v2 2/4] zynq: move static peripheral mappings   Rob Herring
• [PATCH v2 2/4] zynq: move static peripheral mappings   Nick Bowler
• [PATCH v2 2/4] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v2 2/4] zynq: move static peripheral mappings   Nick Bowler
• [PATCH v2 2/4] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v2 2/4] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v2 2/4] zynq: move static peripheral mappings   Nick Bowler
• [PATCH v2 2/5] ARM: bcm476x: Add system timer   Domenico Andreoli
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Rob Herring
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Tony Lindgren
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   viresh kumar
• [PATCH v2 2/5] ARM: KVM: arch_timers: Add minimal infrastructure   Christoffer Dall
• [PATCH V2 2/5] arm: mvebu: Added initial support for power managmement service unit   Gregory CLEMENT
• [PATCH v2 2/5] clk: Add support for fundamental zynq clks   Josh Cartwright
• [PATCH v2 2/5] clk: exynos4: register clocks using common clock framework   Thomas Abraham
• [PATCH v2 2/5] clk: exynos4: register clocks using common clock framework   Tomasz Figa
• [PATCH v2 2/5] iommu/omap: Merge iommu2.h into iommu.h   Ido Yariv
• [PATCH v2 2/5] iommu/omap: Merge iommu2.h into iommu.h   Tony Lindgren
• [PATCH v2 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Vasanth Ananthan
• [PATCH V2 2/7] ARM: OMAP1: DMA: Moving OMAP1 DMA channel definitions to mach-omap1   Lokesh Vutla
• [PATCH v2 2/7] ARM: OMAP2xxx: hwmod: Add DMA support for SHAM module   Mark A. Greer
• [PATCH V2 2/7] ARM: tegra: cpuidle: add LP2 resume function   Joseph Lo
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Russell King - ARM Linux
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Nicolas Pitre
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Marc Zyngier
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Nicolas Pitre
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Marc Zyngier
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Nicolas Pitre
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Russell King - ARM Linux
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Marc Zyngier
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Dave Martin
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Marc Zyngier
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Dave Martin
• [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Tony Lindgren
• [PATCH V2 2/7] cpsw: add missing fields to the CPSW_SS register bank.   Richard Cochran
• [PATCH v2 2/7] i2c: omap: reorder exit path of omap_i2c_xfer_msg()   Felipe Balbi
• [PATCH v2 2/7] i2c: omap: reorder exit path of omap_i2c_xfer_msg()   Felipe Balbi
• [PATCH v2 2/7] i2c: omap: reorder exit path of omap_i2c_xfer_msg()   Santosh Shilimkar
• [PATCH v2 2/7] i2c: omap: reorder exit path of omap_i2c_xfer_msg()   Lothar Waßmann
• [PATCH v2 2/8] ARM: hw_breakpoint: fix monitor mode detection with v7.1   Will Deacon
• [PATCH v2 2/8] SCSI: ARM: make fas216_dumpinfo function conditional   Arnd Bergmann
• [PATCH v2 2/9] pinctrl: single: support gpio request and free   Haojian Zhuang
• [PATCH v2 2/9] pinctrl: single: support gpio request and free   Tony Lindgren
• [PATCH v2 2/9] pinctrl: single: support gpio request and free   Tony Lindgren
• [PATCH v2 2/9] pinctrl: single: support gpio request and free   Haojian Zhuang
• [PATCH v2 2/9] pinctrl: single: support gpio request and free   Haojian Zhuang
• [PATCH v2 27/34] media: mx2_camera: remove cpu_is_xxx by using platform_device_id   Shawn Guo
• [PATCH v2 27/34] media: mx2_camera: remove cpu_is_xxx by using platform_device_id   Mauro Carvalho Chehab
• [PATCH v2 3/3] ARM: dts: enable dma support for auart0 in mx28   Huang Shijie
• [PATCH V2 3/3] ARM: dts: omap5-evm: LPDDR2 memory device details for EVM   Lokesh Vutla
• [PATCH v2 3/3] ARM: Kirkwood: checkpatch cleanups   Andrew Lunn
• [PATCH v2 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Kishon Vijay Abraham I
• [PATCH v2 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Felipe Balbi
• [PATCH v2 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Arnd Bergmann
• [PATCH v2 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Tony Lindgren
• [PATCH v2 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Felipe Balbi
• [PATCH v2 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Tony Lindgren
• [PATCH v2 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   kishon
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Stephen Warren
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Arnd Bergmann
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Rob Herring
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Stephen Warren
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Stephen Warren
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Rob Herring
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Russell King - ARM Linux
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Rob Herring
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Russell King - ARM Linux
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Rob Herring
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Stephen Warren
• [PATCH V2 3/3] ARM: tegra: move debug-macro.S to include/debug   Stephen Warren
• [PATCH V2 3/3] clocksource: time-armada-370-xp converted to clk framework   Gregory CLEMENT
• [PATCH V2 3/3] clocksource: time-armada-370-xp converted to clk framework   Mike Turquette
• [PATCH v2 3/3] net/at91_ether: add pdata flag for reverse Eth addr   Joachim Eastwood
• [PATCH V2 3/3] spi: spi-pl022: Minor simplification for runtime pm   Ulf Hansson
• [PATCH V2 3/3] spi: spi-pl022: Minor simplification for runtime pm   Ulf Hansson
• [PATCH V2 3/3] spi: spi-pl022: Minor simplification for runtime pm   Linus Walleij
• [PATCH V2 3/3] spi: spi-pl022: Minor simplification for runtime pm   Rafael J. Wysocki
• [PATCH v2 3/4] ARM: dts: omap5: Update UART with address space and interrupts   Sebastien Guiriec
• [PATCH v2 3/4] ARM: EXYNOS: pm_domain: Bind devices to power domains using DT   Tomasz Figa
• [PATCH v2 3/4] ARM: kirkwood: DT board setup for Network Space Lite v2   Simon Guinot
• [PATCH v2 3/4] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH V2 3/4] arm: mvebu: adding SATA support: configs update   Gregory CLEMENT
• [PATCH v2 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Thomas Petazzoni
• [PATCH v2 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Thomas Petazzoni
• [PATCH v2 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Thomas Petazzoni
• [PATCH V2 3/4] ARM: tegra: dts: cardhu: enable SLINK4   Laxman Dewangan
• [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs   Bo Shen
• [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs   Nicolas Ferre
• [PATCH v2 3/4] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH v2 3/5] ARM: bcm476x: Add ripple counter   Domenico Andreoli
• [PATCH v2 3/5] ARM: dts: Add Exynos4210 clock nodes   Thomas Abraham
• [PATCH v2 3/5] ARM: KVM: arch_timers: Add guest timer core support   Christoffer Dall
• [PATCH V2 3/5] arm: mvebu: Added IPI support via doorbells   Gregory CLEMENT
• [PATCH v2 3/5] ARM: use generic unaligned.h   Shawn Guo
• [PATCH v2 3/5] ARM: use generic unaligned.h   Rob Herring
• [PATCH v2 3/5] ARM: use generic unaligned.h   Shawn Guo
• [PATCH v2 3/5] ARM: use generic unaligned.h   Rob Herring
• [PATCH v2 3/5] ARM: use generic unaligned.h   Shawn Guo
• [PATCH v2 3/5] ARM: use generic unaligned.h   Nicolas Pitre
• [PATCH v2 3/5] ARM: use generic unaligned.h   Rob Herring
• [PATCH v2 3/5] ARM: use generic unaligned.h   Nicolas Pitre
• [PATCH v2 3/5] iommu/omap: Make some definitions local   Ido Yariv
• [PATCH v2 3/5] irqchip: Move ARM GIC to drivers/irqchip   Rob Herring
• [PATCH v2 3/5] irqchip: Move ARM GIC to drivers/irqchip   Russell King - ARM Linux
• [PATCH v2 3/5] irqchip: Move ARM GIC to drivers/irqchip   Rob Herring
• [PATCH v2 3/5] irqchip: Move ARM GIC to drivers/irqchip   Russell King - ARM Linux
• [PATCH v2 3/5] irqchip: Move ARM GIC to drivers/irqchip   Stephen Warren
• [PATCH V2 3/5] pinctrl: SPEAr: Add plgpio driver   Viresh Kumar
• [PATCH v2 3/6] DRIVERS: ATA: SATA PHY utility framework   Vasanth Ananthan
• [PATCH V2 3/7] ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2   Lokesh Vutla
• [PATCH v2 3/7] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH V2 3/7] ARM: tegra30: cpuidle: add LP2 driver for secondary CPUs   Joseph Lo
• [PATCH V2 3/7] cpsw: correct the CPSW_PORT register bank declaration   Richard Cochran
• [PATCH v2 3/7] i2c: omap: also complete() when stat becomes zero   Felipe Balbi
• [PATCH v2 3/7] i2c: omap: also complete() when stat becomes zero   Felipe Balbi
• [PATCH v2 3/7] i2c: omap: also complete() when stat becomes zero   Santosh Shilimkar
• [PATCH v2 3/8] ARM: hw_breakpoint: fix ordering of debug register reset sequence   Will Deacon
• [PATCH v2 3/8] mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN   Arnd Bergmann
• [PATCH v2 3/9] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH v2 4/4] ARM: dts: exynos4: Set up power domains   Tomasz Figa
• [PATCH v2 4/4] ARM: dts: omap5: Update MMC with address space and interrupts   Sebastien Guiriec
• [PATCH v2 4/4] ARM: kirkwood: DT board setup for Network Space Mini v2   Simon Guinot
• [PATCH V2 4/4] arm: mvebu: adding SATA support: dt binding for Armada 370/XP boards   Gregory CLEMENT
• [PATCH v2 4/4] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH V2 4/4] ARM: tegra: config: enable spi driver for Tegra SLINK controller   Laxman Dewangan
• [Patch v2 4/4] ASoC: sam9g20-wm8731: convert to device tree support   Bo Shen
• [Patch v2 4/4] ASoC: sam9g20-wm8731: convert to device tree support   Nicolas Ferre
• [PATCH v2 4/4] irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS   Thomas Petazzoni
• [PATCH v2 4/4] irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS   Rob Herring
• [PATCH v2 4/4] zynq: remove use of CLKDEV_LOOKUP   Josh Cartwright
• [PATCH v2 4/5] ARM: bcm476x: Add stub clock driver   Domenico Andreoli
• [PATCH v2 4/5] ARM: dts: list the clock providers for serial ports   Thomas Abraham
• [PATCH v2 4/5] ARM: KVM: arch_timers: Add timer world switch   Christoffer Dall
• [PATCH V2 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH v2 4/5] arm: omap: Move iommu/iovmm headers to platform_data   Ido Yariv
• [PATCH v2 4/5] irqchip: Move ARM VIC to drivers/irqchip   Rob Herring
• [PATCH v2 4/5] irqchip: Move ARM VIC to drivers/irqchip   Russell King - ARM Linux
• [PATCH V2 4/5] pinctrl: SPEAr: Add gpio ranges support   Viresh Kumar
• [PATCH v2 4/5] serial: xilinx_uartps: get clock rate info from dts   Josh Cartwright
• [PATCH v2 4/6] DRIVERS:I2C: I2C driver polling mode support   Vasanth Ananthan
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Sekhar Nori
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Matt Porter
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Ben Gardiner
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Matt Porter
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Sekhar Nori
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Sekhar Nori
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Ben Gardiner
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Matt Porter
• [PATCH v2 4/7] ARM: davinci: Add support for an L3RAM gen_pool   Matt Porter
• [PATCH v2 4/7] ARM: OMAP2+: Remove unnecessary message when no SHA IP is present   Mark A. Greer
• [PATCH V2 4/7] ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h   Lokesh Vutla
• [PATCH V2 4/7] ARM: tegra30: common: enable csite clock   Joseph Lo
• [PATCH V2 4/7] cpsw: add a common header file for regsiter declarations   Richard Cochran
• [PATCH v2 4/7] i2c: omap: in case of VERSION_2 read IRQSTATUS_RAW but write to IRQSTATUS   Felipe Balbi
• [PATCH v2 4/7] i2c: omap: in case of VERSION_2 read IRQSTATUS_RAW but write to IRQSTATUS   Felipe Balbi
• [PATCH v2 4/7] i2c: omap: in case of VERSION_2 read IRQSTATUS_RAW but write to IRQSTATUS   Santosh Shilimkar
• [PATCH v2 4/7] i2c: omap: in case of VERSION_2 read IRQSTATUS_RAW but write to IRQSTATUS   Santosh Shilimkar
• [PATCH v2 4/8] ARM: hw_breakpoint: don't try to clear v6 debug registers during boot   Will Deacon
• [PATCH v2 4/8] USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit   Arnd Bergmann
• [PATCH v2 4/9] ARM: dts: support pinctrl single in pxa910   Haojian Zhuang
• [PATCH v2 5/5] ARM: bcm476x: Add restart hook   Domenico Andreoli
• [PATCH v2 5/5] ARM: Exynos4: Migrate clock support to common clock framework   Thomas Abraham
• [PATCH v2 5/5] ARM: highbank: use common irqchip_init   Rob Herring
• [PATCH v2 5/5] ARM: KVM: arch_timers: Wire the init code and config option   Christoffer Dall
• [PATCH V2 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH v2 5/5] arm: omap: Move iopgtable header to drivers/iommu/   Ido Yariv
• [PATCH V2 5/5] ARM: SPEAr: Add plgpio node in device tree dtsi files   Viresh Kumar
• [PATCH v2 5/5] ARM: zynq: add clk binding support to the ttc   Josh Cartwright
• [PATCH v2 5/6] DRIVERS: ATA: SATA controller driver   Vasanth Ananthan
• [PATCH V2 5/7] ARM: OMAP1: Remove omap_reserve() callback for all omap1 boards   Lokesh Vutla
• [PATCH V2 5/7] ARM: tegra30: clocks: add CPU low-power function into tegra_cpu_car_ops   Joseph Lo
• [PATCH V2 5/7] cpts: introduce time stamping code and a PTP hardware clock.   Richard Cochran
• [PATCH v2 5/7] crypto: omap-sham: Convert to use pm_runtime API   Mark A. Greer
• [PATCH v2 5/7] crypto: omap-sham: Convert to use pm_runtime API   Kevin Hilman
• [PATCH v2 5/7] crypto: omap-sham: Convert to use pm_runtime API   Mark A. Greer
• [PATCH v2 5/7] i2c: omap: wait for transfer completion before sending STP bit   Felipe Balbi
• [PATCH v2 5/7] i2c: omap: wait for transfer completion before sending STP bit   Felipe Balbi
• [PATCH v2 5/7] i2c: omap: wait for transfer completion before sending STP bit   Santosh Shilimkar
• [PATCH v2 5/7] i2c: omap: wait for transfer completion before sending STP bit   Felipe Balbi
• [PATCH v2 5/8] ARM: hw_breakpoint: make boot quieter without CPUID feature registers   Will Deacon
• [PATCH v2 5/8] clk: don't mark clkdev_add_table as init   Arnd Bergmann
• [PATCH v2 5/8] clk: don't mark clkdev_add_table as init   Russell King - ARM Linux
• [PATCH v2 5/8] clk: don't mark clkdev_add_table as init   Arnd Bergmann
• [PATCH v2 5/8] i2c: omap: in case of VERSION_2 read IRQSTATUS_RAW but write to IRQSTATUS   Felipe Balbi
• [PATCH v2 5/9] document: devicetree: bind pinconf with pin-single   Haojian Zhuang
• [PATCH v2 5/9] document: devicetree: bind pinconf with pin-single   Stephen Warren
• [PATCH v2 5/9] document: devicetree: bind pinconf with pin-single   Haojian Zhuang
• [PATCH v2 5/9] document: devicetree: bind pinconf with pin-single   Stephen Warren
• [PATCH v2 5/9] document: devicetree: bind pinconf with pin-single   Haojian Zhuang
• [PATCH v2 5/9] document: devicetree: bind pinconf with pin-single   Tony Lindgren
• [PATCH v2 6/6] DRIVERS: ATA: SATA PHY controller driver   Vasanth Ananthan
• [PATCH V2 6/7] ARM: OMAP2+: Move omap_reserve() locally to mach-omap2   Lokesh Vutla
• [PATCH V2 6/7] ARM: tegra30: flowctrl: add cpu_suspend_exter/exit function   Joseph Lo
• [PATCH V2 6/7] cpsw: add a DT field for the cpts offset   Richard Cochran
• [PATCH v2 6/7] crypto: omap-sham: Add code to use dmaengine API   Mark A. Greer
• [PATCH v2 6/7] i2c: add 'transferred' field to struct i2c_msg   Felipe Balbi
• [PATCH v2 6/8] ARM: hw_breakpoint: check if monitor mode is enabled during validation   Will Deacon
• [PATCH v2 6/8] pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops   Arnd Bergmann
• [PATCH v2 6/9] tty: pxa: configure pin   Haojian Zhuang
• [PATCH v2 6/9] tty: pxa: configure pin   Linus Walleij
• [PATCH V2 7/7] ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2   Lokesh Vutla
• [PATCH V2 7/7] ARM: tegra30: cpuidle: add LP2 driver for CPU0   Joseph Lo
• [PATCH V2 7/7] cpsw: use the time stamping capabilities of the cpts   Richard Cochran
• [PATCH v2 7/7] crypto: omap_sham: Remove usage of private DMA API   Mark A. Greer
• [PATCH v2 7/7] i2c: omap: implement handling for 'transferred' bytes   Felipe Balbi
• [PATCH v2 7/7] i2c: omap: implement handling for 'transferred' bytes   Paul Walmsley
• [PATCH v2 7/8] ARM: hw_breakpoint: use CRn as argument for debug reg accessor macros   Will Deacon
• [PATCH v2 7/8] video: mark nuc900fb_map_video_memory as __devinit   Arnd Bergmann
• [PATCH v2 7/8] video: mark nuc900fb_map_video_memory as __devinit   Wan ZongShun
• [PATCH v2 7/8] video: mark nuc900fb_map_video_memory as __devinit   Florian Tobias Schandinat
• [PATCH v2 7/9] i2c: pxa: use devm_kzalloc   Haojian Zhuang
• [PATCH v2 8/8] ARM: hw_breakpoint: kill WARN_ONCE usage   Will Deacon
• [PATCH v2 8/9] ARM: OMAP: iommu: add device tree support   Matt Porter
• [PATCH v2 8/9] ARM: OMAP: iommu: add device tree support   Omar Ramirez Luna
• [PATCH v2 8/9] i2c: pxa: configure pinmux   Haojian Zhuang
• [PATCH v2 8/9] i2c: pxa: configure pinmux   Linus Walleij
• [PATCH v2 9/9] pinctrl: single: dump pinmux register value   Haojian Zhuang
• [PATCH v2 9/9] pinctrl: single: dump pinmux register value   Tony Lindgren
• [PATCH v2] Add of helper for linux,stdout-path   Sascha Hauer
• [PATCH v2] arch/arm/mach-davinci/board-dm646x-evm.c: Remove unecessary semicolon   Sekhar Nori
• [PATCH v2] arm/dts: AM33XX: Add SPI device tree data   Benoit Cousson
• [PATCH v2] arm/dts: AM33XX: Add SPI device tree data   Philip, Avinash
• [PATCH v2] arm/dts: AM33XX: Add SPI device tree data   Matt Porter
• [PATCH v2] arm/dts: AM33XX: Add SPI device tree data   Benoit Cousson
• [PATCH v2] arm/dts: AM33XX: Add SPI device tree data   Matt Porter
• [PATCH v2] ARM: add back in KS8695 based OpenGear board entries   gerg at snapgear.com
• [PATCH v2] ARM: add back in KS8695 based SnapGear board entries   gerg at snapgear.com
• [PATCH v2] ARM: dm365: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Prabhakar Lad
• [PATCH v2] ARM: dm365: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Sekhar Nori
• [PATCH v2] ARM: dm365: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Sergei Shtylyov
• [PATCH v2] ARM: Dove: update defconfig   Sebastian Hesselbarth
• [PATCH V2] ARM: dt: tegra: ventana: define pinmux for ddc   Mark Zhang
• [PATCH V2] ARM: dt: tegra: ventana: define pinmux for ddc   Stephen Warren
• [PATCH v2] ARM: dts: am33xx: rtc node   Afzal Mohammed
• [PATCH v2] ARM: dts: am33xx: rtc node   Benoit Cousson
• [PATCH v2] ARM: dts: am33xx: rtc node   Afzal Mohammed
• [PATCH v2] ARM: dts: imx6q-sabreauto: Add basic support   Fabio Estevam
• [PATCH v2] ARM: dts: imx6q-sabreauto: Add basic support   Shawn Guo
• [PATCHv2] arm: dts: omap4-sdp: pinmux configuration for keypad   Sourav Poddar
• [PATCH v2] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Kukjin Kim
• [PATCH v2] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Tomasz Figa
• [PATCH v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Gaëtan Carlier
• [PATCH v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA   Sascha Hauer
• [PATCH v2] ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60   Sascha Hauer
• [PATCH V2] ARM: Kirkwood: new board USI Topkick   Jason Cooper
• [PATCH V2] ARM: Kirkwood: new board USI Topkick   Andrew Lunn
• [PATCH V2] ARM: Kirkwood: new board USI Topkick   Jason Cooper
• [PATCH v2] ARM: mach-imx: Let ARCH_MXC select HAVE_IMX_SRC   Fabio Estevam
• [PATCH v2] ARM: mach-imx: Let ARCH_MXC select HAVE_IMX_SRC   Shawn Guo
• [PATCH v2] arm: mvebu: support for the PlatHome OpenBlocks AX3-4 board   Thomas Petazzoni
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Shawn Guo
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Marek Vasut
• [PATCH V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT   Shawn Guo
• [PATCH v2] ARM: mxs: Add support for the Armadeus Systems APF28 module   julien.boibessot at free.fr
• [PATCH v2] ARM: mxs: Add support for the Armadeus Systems APF28 module   Shawn Guo
• [PATCH v2] ARM: mxs_defconfig: Improve USB related support   Fabio Estevam
• [PATCH v2] ARM: mxs_defconfig: Improve USB related support   Shawn Guo
• [PATCH v2] ARM: OMAP1: usb: fix sparse warnings   Paul Walmsley
• [PATCH v2] ARM: OMAP1: usb: fix sparse warnings   Tony Lindgren
• [PATCH v2] ARM: OMAP1: usb: fix sparse warnings   Felipe Balbi
• [PATCH v2] ARM: OMAP2+: Add am335x evm and bone targets to common Makefile   Tony Lindgren
• [PATCH V2] ARM: OMAP2+: PM: VP: minor pr_warn updates   Nishanth Menon
• [PATCH V2] ARM: OMAP2+: PM: VP: minor pr_warn updates   Kevin Hilman
• [PATCH V2] ARM: OMAP2+: Round of the carve out memory requested to section_size   Tony Lindgren
• [PATCH v2] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Kevin Hilman
• [PATCH v2] ARM: OMAP2: UART: fix console UART mismatched runtime PM status   Sourav
• [PATCH V2] ARM: OMAP: counter: add locking to read_persistent_clock   Tony Lindgren
• [PATCH v2] ARM: OMAP: Fix dependency for OMAP_DEBUG_LEDS   Axel Lin
• [PATCH v2] ARM: OMAP: Fix dependency for OMAP_DEBUG_LEDS   Tony Lindgren
• [PATCH v2] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Felipe Balbi
• [PATCH v2] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Tony Lindgren
• [PATCH v2] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Felipe Balbi
• [PATCH v2] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Tony Lindgren
• [PATCH v2] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Felipe Balbi
• [PATCH v2] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>   Tony Lindgren
• [PATCH V2] ARM: PMU: fix runtime PM enable   Jon Hunter
• [PATCH V2] ARM: PMU: fix runtime PM enable   Kevin Hilman
• [PATCH V2] ARM: PMU: fix runtime PM enable   Will Deacon
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Stephen Warren
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   David Brown
• [PATCH v2] ARM: pxa: hx4700: Fix backlight PWM device number   Haojian Zhuang
• [PATCH v2] arm: sched: stop sched_clock() during suspend   Felipe Balbi
• [PATCH v2] arm: sched: stop sched_clock() during suspend   Kevin Hilman
• [PATCH v2] ARM: SMP_TWD: make setup()/stop() reentrant   Linus Walleij
• [PATCH v2] ARM: SMP_TWD: make setup()/stop() reentrant   Shawn Guo
• [PATCH v2] ARM: SMP_TWD: make setup()/stop() reentrant   Shawn Guo
• [PATCH v2] ARM: SMP_TWD: make setup()/stop() reentrant   Santosh Shilimkar
• [PATCH v2] ARM: SMP_TWD: make setup()/stop() reentrant   Linus Walleij
• [PATCH v2] ARM: SMP_TWD: make setup()/stop() reentrant   Shawn Guo
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   dinguyen at altera.com
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Pavel Machek
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Thomas Petazzoni
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Rob Herring
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Arnd Bergmann
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Rob Herring
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Dinh Nguyen
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Dinh Nguyen
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Dinh Nguyen
• [PATCHv2] arm:socfpga: Enable SMP for socfpga   Dinh Nguyen
• [PATCH V2] ARM: tegra30: clocks: add AHB and APB clocks   Joseph Lo
• [PATCH V2] ARM: tegra30: clocks: add AHB and APB clocks   Stephen Warren
• [PATCH v2] arm: vt8500: Fix build warning in uncompress.h [for 3.7]   Tony Prisk
• [PATCH v2] arm: vt8500: Fix build warning in uncompress.h [for 3.7]   Tony Prisk
• [PATCH v2] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Nick Bowler
• [PATCH v2] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Michal Simek
• [PATCH v2] ASoC: Samsung: Update Kconfig for Exynos5250 and Exynos4412   Kukjin Kim
• [PATCH v2] ASoC: Samsung: Update Kconfig for Exynos5250 and Exynos4412   Olof Johansson
• [PATCH v2] DMA: AT91: Get residual bytes in dma buffer   Elen Song
• [PATCH v2] fix DEBUG_LL DCC race condition   Johannes Stezenbach
• [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Kevin Hilman
• [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Jon Hunter
• [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Santosh Shilimkar
• [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Jon Hunter
• [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Santosh Shilimkar
• [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Kevin Hilman
• [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Kevin Hilman
• [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Jon Hunter
• [PATCH V2] gpiolib: provide provision for gpiolib to register pin range   Viresh Kumar
• [PATCH v2] i2c: change the id to let the i2c-gpio work   Bo Shen
• [PATCH v2] i2c: change the id to let the i2c-gpio work   Jean Delvare
• [PATCH v2] i2c: change the id to let the i2c-gpio work   Joachim Eastwood
• [PATCH v2] i2c: change the id to let the i2c-gpio work   Bo Shen
• [PATCH v2] i2c: change the id to let the i2c-gpio work   ludovic.desroches
• [PATCH v2] i2c: change the id to let the i2c-gpio work   Nicolas Ferre
• [PATCH v2] i2c: change the id to let the i2c-gpio work   Bo Shen
• [PATCH v2] i2c: change the id to let the i2c-gpio work   Nicolas Ferre
• [PATCH v2] i2c: i2c-gpio: fix name issue when i2c gpio node GT 1   Bo Shen
• [PATCH v2] i2c: i2c-gpio: fix name issue when i2c gpio node GT 1   Stephen Warren
• [PATCH v2] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCH v2] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti D
• [PATCH v2] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti Datta
• [PATCH v2] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCH v2] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti Datta
• [PATCH v2] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Sourav Poddar
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Benoit Cousson
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Benoit Cousson
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Thomas Petazzoni
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Thomas Petazzoni
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mitch Bradley
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mitch Bradley
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Benoit Cousson
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Dmitry Torokhov
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Felipe Balbi
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Rafael J. Wysocki
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Kevin Hilman
• [PATCH v2] Introduce minimal irqchip infrastructure   Thomas Petazzoni
• [PATCH v2] Introduce minimal irqchip infrastructure   Rob Herring
• [PATCH v2] Introduce minimal irqchip infrastructure   Thomas Petazzoni
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   AnilKumar, Chimata
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Tony Lindgren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   AnilKumar, Chimata
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Tony Lindgren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   AnilKumar, Chimata
• [PATCH v2] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH v2] pinctrl/nomadik: use irq_create_mapping()   Linus Walleij
• [PATCH v2] pinctrl/nomadik: use irq_create_mapping()   Stephen Warren
• [PATCH v2] pinctrl: reserve pins when states are activated   Linus Walleij
• [PATCH v2] pinctrl: reserve pins when states are activated   Jean-Nicolas GRAUX
• [PATCH v2] pinctrl: reserve pins when states are activated   Stephen Warren
• [PATCH v2] pinctrl: reserve pins when states are activated   Tony Lindgren
• [PATCH v2] pinctrl: reserve pins when states are activated   Linus Walleij
• [PATCH v2] pinctrl: reserve pins when states are activated   Tony Lindgren
• [PATCH v2] pinctrl: reserve pins when states are activated   Stephen Warren
• [PATCH v2] pinctrl: reserve pins when states are activated   Linus Walleij
• [PATCH v2] pinctrl: reserve pins when states are activated   Linus Walleij
• [PATCH v2] pwm: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH v2] pwm: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH v2] serial: vt8500: fix possible memory leak in vt8500_serial_probe()   Wei Yongjun
• [PATCH v2] USB: usb-skeleton.c: fix compilation error and restore kref_put on fail in skel_open   Constantine Shulyupin
• [PATCH v2] USB: usb-skeleton.c: fix compilation error and restore kref_put on fail in skel_open   Oliver Neukum
• [PATCH v2] vfs: bogus warnings in fs/namei.c   Arnd Bergmann
• [PATCH v2] video: imxfb: Do not crash on reboot   Fabio Estevam
• [PATCH v2] video: imxfb: Do not crash on reboot   Baruch Siach
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Dave Martin
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Lorenzo Pieralisi
• [PATCH v2 RESEND 2/2] ARM: local timers: add timer support using IO mapped register   Dave Martin
• [PATCH V2 RESEND 2/5] gpiolib: provide provision for gpiolib to register pin range   Viresh Kumar
• [PATCH v2 RESEND] ARM: pxa: hx4700: Fix backlight PWM device number   Paul Parsons
• [PATCH v2 RESEND] ARM: pxa: hx4700: Fix backlight PWM device number   Haojian Zhuang
• [PATCH v2 v2 v2 8/8] spi/s3c64xx: use correct dma_transfer_direction type   Arnd Bergmann
• [PATCH v2 v2 v2 8/8] spi/s3c64xx: use correct dma_transfer_direction type   Kukjin Kim
• [PATCH v2 v2 v2 8/8] spi/s3c64xx: use correct dma_transfer_direction type   Arnd Bergmann
• [PATCH v3 0/2] ARM: davinci: da850/omap-l138: add support for VPIF driver   Sekhar Nori
• [PATCH V3 0/2] ARM: OMAP2+: Add device-tree support for 32kHz counter   Jon Hunter
• [PATCH v3 0/2] ARM: pci: Prepare for Tegra PCIe controller driver   Thierry Reding
• [PATCH v3 0/2] i2c: change id to let i2c-gpio work   Bo Shen
• [PATCH V3 0/3] Add clock framework for armada 370/XP   Gregory CLEMENT
• [PATCH V3 0/3] Add clock framework for armada 370/XP   Jason Cooper
• [PATCH V3 0/3] Add clock framework for armada 370/XP   Gregory CLEMENT
• [PATCH v3 0/3] Add DMA and device tree support to the flash controller FLCTL   Bastian Hecht
• [PATCH v3 0/3] ocp2scp: add non-dt support   Kishon Vijay Abraham I
• [PATCHv3 0/4] Add mfd driver for smsc-ece1099 chip   Sourav Poddar
• [PATCH v3 0/4] ARM: dts: Update OMAP5 with address space and interrupts   Sebastien Guiriec
• [PATCH v3 0/4] ARM: dts: Update OMAP5 with address space and interrupts   Benoit Cousson
• [PATCH v3 0/4] ARM: dts: Update OMAP5 with address space and interrupts   Sebastien Guiriec
• [PATCH v3 0/4] ARM: dts: Update OMAP5 with address space and interrupts   Benoit Cousson
• [PATCH V3 0/4] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH V3 0/4] ARM: tegra: Enable SLINK controller driver   Stephen Warren
• [PATCH V3 0/4] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH V3 0/4] ARM: tegra: Enable SLINK controller driver   Stephen Warren
• [PATCH V3 0/4] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH v3 0/4] make cadence ethernet drivers build on any architecture   Joachim Eastwood
• [PATCH v3 0/4] make cadence ethernet drivers build on any architecture   David Miller
• [PATCH V3 0/5] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH V3 0/5] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH v3 0/5] KVM/ARM Architected Timers support   Christoffer Dall
• [PATCH v3 0/5] zynq subarch cleanups   Josh Cartwright
• [PATCH v3 0/5] zynq subarch cleanups   Arnd Bergmann
• [PATCH v3 0/6] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH v3 0/6] DT support for AT91RM9200   Joachim Eastwood
• [PATCH v3 0/6] omap-am33xx rtc dt support   Afzal Mohammed
• [PATCH v3 0/6] OMAP: iommu: hwmod, reset handling and runtime PM   Omar Ramirez Luna
• [PATCH v3 0/6] OMAP: iommu: hwmod, reset handling and runtime PM   Tony Lindgren
• [PATCH v3 0/6] OMAP: iommu: hwmod, reset handling and runtime PM   Omar Ramirez Luna
• [PATCH v3 0/6] OMAP: iommu: hwmod, reset handling and runtime PM   Tony Lindgren
• [PATCH v3 0/6] OMAP: iommu: hwmod, reset handling and runtime PM   Omar Ramirez Luna
• [PATCH v3 0/6] omap iommu changes to remove plat includes   Tony Lindgren
• [PATCH v3 0/6] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v3 0/6] uio_pruss cleanup and platform support   Philipp Zabel
• [PATCH v3 0/6] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v3 0/6] uio_pruss cleanup and platform support   Sekhar Nori
• [PATCH v3 0/6] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v3 0/6] uio_pruss cleanup and platform support   Philipp Zabel
• [PATCH v3 0/6] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v3 0/6] uio_pruss cleanup and platform support   Philipp Zabel
• [PATCH V3 0/7] ARM: tegra30: cpuidle: add a powered-down state   Joseph Lo
• [PATCH V3 0/7] ARM: tegra30: cpuidle: add a powered-down state   Stephen Warren
• [PATCH V3 0/7] ARM: tegra30: cpuidle: add a powered-down state   Joseph Lo
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Jason Cooper
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Will Deacon
• [PATCH V3 0/8] ARM: OMAP4: Add PMU Support   Jon Hunter
• [PATCH v3 0/9]: pinctrl-single support DT   Haojian Zhuang
• [PATCH v3 00/10] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Nicolas Ferre
• [PATCH v3 00/10] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Nicolas Ferre
• [PATCH v3 00/10] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Joachim Eastwood
• [PATCH v3 00/11] common clk drivers migration for DaVinci SoCs   Murali Karicheri
• [PATCH v3 00/11] common clk drivers migration for DaVinci SoCs   Karicheri, Muralidharan
• [PATCH v3 00/13] KVM/ARM vGIC support   Christoffer Dall
• [PATCH v3 00/14] KVM/ARM Implementation   Christoffer Dall
• [PATCH v3 01/10] net/macb: Add support for Gigabit Ethernet mode   Nicolas Ferre
• [PATCH v3 01/11] clk: davinci - add main PLL clock driver   Murali Karicheri
• [PATCH v3 01/11] clk: davinci - add main PLL clock driver   Linus Walleij
• [PATCH v3 01/11] clk: davinci - add main PLL clock driver   Sekhar Nori
• [PATCH v3 01/11] clk: davinci - add main PLL clock driver   Murali Karicheri
• [PATCH v3 01/11] clk: davinci - add main PLL clock driver   Murali Karicheri
• [PATCH v3 01/13] KVM: ARM: Introduce KVM_SET_DEVICE_ADDRESS ioctl   Christoffer Dall
• [PATCH v3 01/14] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH v3 02/10] net/macb: memory barriers cleanup   Nicolas Ferre
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Murali Karicheri
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Linus Walleij
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Murali Karicheri
• [PATCH v3 02/13] ARM: KVM: Keep track of currently running vcpus   Christoffer Dall
• [PATCH v3 02/14] ARM: Section based HYP idmap   Christoffer Dall
• [PATCH v3 03/10] net/macb: change debugging messages   Nicolas Ferre
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Murali Karicheri
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Linus Walleij
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Murali Karicheri
• [PATCH v3 03/13] ARM: KVM: Initial VGIC infrastructure support   Christoffer Dall
• [PATCH v3 03/14] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v3 04/10] net/macb: remove macb_get_drvinfo()   Nicolas Ferre
• [PATCH v3 04/11] clk: davinci - add pll divider clock driver   Murali Karicheri
• [PATCH v3 04/11] clk: davinci - add pll divider clock driver   Linus Walleij
• [PATCH v3 04/11] clk: davinci - add pll divider clock driver   Murali Karicheri
• [PATCH v3 04/13] ARM: KVM: Initial VGIC MMIO support code   Christoffer Dall
• [PATCH v3 04/14] KVM: ARM: Initial skeleton to compile KVM support   Christoffer Dall
• [PATCH v3 05/10] net/macb: tx status is more than 8 bits now   Nicolas Ferre
• [PATCH v3 05/11] clk: davinci - add dm644x clock initialization   Murali Karicheri
• [PATCH v3 05/13] ARM: KVM: VGIC accept vcpu and dist base addresses from user space   Christoffer Dall
• [PATCH v3 05/14] KVM: ARM: Hypervisor inititalization   Christoffer Dall
• [PATCH v3 06/10] net/macb: clean up ring buffer logic   Nicolas Ferre
• [PATCH v3 06/10] net/macb: clean up ring buffer logic   David Laight
• [PATCH v3 06/10] net/macb: clean up ring buffer logic   Håvard Skinnemoen
• [PATCH v3 06/10] net/macb: clean up ring buffer logic   David Laight
• [PATCH v3 06/10] net/macb: clean up ring buffer logic   David Laight
• [PATCH v3 06/10] net/macb: clean up ring buffer logic   Nicolas Ferre
• [PATCH v3 06/10] net/macb: clean up ring buffer logic   Nicolas Ferre
• [PATCH v3 06/11] clk: davinci - add build infrastructure for DaVinci clock drivers   Murali Karicheri
• [PATCH v3 06/13] ARM: KVM: VGIC distributor handling   Christoffer Dall
• [PATCH v3 06/14] KVM: ARM: Memory virtualization setup   Christoffer Dall
• [PATCH v3 07/10] net/macb: ethtool interface: add register dump feature   Nicolas Ferre
• [PATCH v3 07/11] ARM: davinci - restructure header files for common clock migration   Murali Karicheri
• [PATCH v3 07/13] ARM: KVM: VGIC virtual CPU interface management   Christoffer Dall
• [PATCH v3 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH v3 08/10] net/macb: better manage tx errors   Nicolas Ferre
• [PATCH v3 08/11] ARM: davinci - migrating to use common clock init code   Murali Karicheri
• [PATCH v3 08/13] ARM: KVM: vgic: retire queued, disabled interrupts   Christoffer Dall
• [PATCH v3 08/14] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH v3 09/10] net/macb: Offset first RX buffer by two bytes   Nicolas Ferre
• [PATCH v3 09/11] ARM: davinci - dm644x: update SoC code to remove the clock data   Murali Karicheri
• [PATCH v3 09/13] ARM: KVM: VGIC interrupt injection   Christoffer Dall
• [PATCH v3 09/14] KVM: ARM: Emulation framework and CP15 emulation   Christoffer Dall
• [PATCH V3 1/2] ARM: dts: OMAP: Add counter-32k nodes   Jon Hunter
• [PATCH v3 1/2] i2c: change id to let i2c-gpio work   Bo Shen
• [PATCH V3 1/3] clk: mvebu: add armada-370-xp specific clocks   Gregory CLEMENT
• [PATCH V3 1/3] clk: mvebu: add armada-370-xp specific clocks   Sebastian Hesselbarth
• [PATCH V3 1/3] dmaengine: dw_dmac: Update documentation style comments for dw_dma_platform_data   Viresh Kumar
• [PATCH v3 1/3] drivers: bus: ocp2scp: add pdata support   Kishon Vijay Abraham I
• [PATCH v3 1/3] drivers: bus: ocp2scp: add pdata support   Felipe Balbi
• [PATCH v3 1/3] mtd: sh_flctl: Minor cleanups   Bastian Hecht
• [PATCH v3 1/4] ARM: dts: omap5: Update GPIO with address space and interrupts   Sebastien Guiriec
• [PATCH V3 1/4] ARM: tegra: dts: add slink controller dt entry   Laxman Dewangan
• [PATCH V3 1/4] Input: pxa27x_keypad keep clock on as wakeup source   Vasily Khoruzhick
• [PATCH v3 1/4] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Sourav Poddar
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   ABRAHAM, KISHON VIJAY
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   ABRAHAM, KISHON VIJAY
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Samuel Ortiz
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   ABRAHAM, KISHON VIJAY
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   ABRAHAM, KISHON VIJAY
• [PATCH v3 1/4] net/macb: fix truncate warnings   Joachim Eastwood
• [PATCH v3 1/4] net/macb: fix truncate warnings   David Laight
• [PATCH v3 1/4] net/macb: fix truncate warnings   David Miller
• [PATCH v3 1/4] net/macb: fix truncate warnings   Lothar Waßmann
• [PATCH v3 1/4] net/macb: fix truncate warnings   Joachim Eastwood
• [PATCH v3 1/5] ARM: arch_timers: switch to physical timers if HYP mode is available   Christoffer Dall
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Hiremath, Vaibhav
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Hiremath, Vaibhav
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Hiremath, Vaibhav
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Hiremath, Vaibhav
• [PATCH V3 1/5] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V3 1/5] ARM: implement debug_ll_io_init()   Stephen Warren
• [PATCH V3 1/5] ARM: implement debug_ll_io_init()   Rob Herring
• [PATCH v3 1/5] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH v3 1/5] zynq: use GIC device tree bindings   Arnd Bergmann
• [PATCH v3 1/6] ARM: Add interface for registering and calling firmware-specific operations   Tomasz Figa
• [PATCH v3 1/6] ARM: AT91: Fix build failure on board-dt   Joachim Eastwood
• [PATCH v3 1/6] ARM: davinci: sram: ioremap the davinci_soc_info specified sram regions   Matt Porter
• [PATCH v3 1/6] ARM: davinci: sram: ioremap the davinci_soc_info specified sram regions   Sekhar Nori
• [PATCH v3 1/6] ARM: davinci: sram: ioremap the davinci_soc_info specified sram regions   Matt Porter
• [PATCH v3 1/6] ARM: OMAP3/4: iommu: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH V3 1/7] ARM: tegra: cpuidle: separate cpuidle driver for different chips   Joseph Lo
• [PATCH v3 1/9] ARM: mmp: select pinctrl driver   Haojian Zhuang
• [PATCH v3 10/10] net/macb: add pinctrl consumer support   Nicolas Ferre
• [PATCH v3 10/10] net/macb: add pinctrl consumer support   Joachim Eastwood
• [PATCH v3 10/10] net/macb: add pinctrl consumer support   Nicolas Ferre
• [PATCH v3 10/11] ARM: davinci - migrate to common clock   Murali Karicheri
• [PATCH v3 10/13] ARM: KVM: VGIC control interface world switch   Christoffer Dall
• [PATCH v3 10/14] KVM: ARM: User space API for getting/setting co-proc registers   Christoffer Dall
• [PATCH v3 11/11] ARM: davinci - common clock migration: clean up the old code   Murali Karicheri
• [PATCH v3 11/13] ARM: KVM: VGIC initialisation code   Christoffer Dall
• [PATCH v3 11/14] KVM: ARM: Demux CCSIDR in the userspace API   Christoffer Dall
• [PATCH v3 12/13] ARM: KVM: vgic: reduce the number of vcpu kick   Christoffer Dall
• [PATCH v3 12/14] KVM: ARM: VFP userspace interface   Christoffer Dall
• [PATCH v3 13/13] ARM: KVM: Add VGIC configuration option   Christoffer Dall
• [PATCH v3 13/14] KVM: ARM: Handle guest faults in KVM   Christoffer Dall
• [PATCH v3 14/14] KVM: ARM: Handle I/O aborts   Christoffer Dall
• [PATCH v3 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Fabio Estevam
• [PATCH v3 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Guennadi Liakhovetski
• [PATCH v3 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Fabio Estevam
• [PATCH v3 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   javier Martin
• [PATCH v3 2/2] [media]: mx2_camera: Fix regression caused by clock conversion   Guennadi Liakhovetski
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Russell King - ARM Linux
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH V3 2/2] ARM: OMAP2+: Add device-tree support for 32kHz counter   Jon Hunter
• [PATCH v3 2/2] i2c: change id to let i2c-at91 work   Bo Shen
• [PATCH v3 2/2] i2c: change id to let i2c-at91 work   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/2] i2c: change id to let i2c-at91 work   Bo Shen
• [PATCH v3 2/2] i2c: change id to let i2c-at91 work   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/2] i2c: change id to let i2c-at91 work   Bo Shen
• [PATCH v3 2/2] i2c: change id to let i2c-at91 work   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/2] i2c: change id to let i2c-at91 work   Bo Shen
• [PATCH v3 2/3] ARM: OMAP4: add _dev_attr_ to ocp2scp for representing usb_phy   Kishon Vijay Abraham I
• [PATCH V3 2/3] clk: armada-370-xp: add support for clock framework   Gregory CLEMENT
• [PATCH V3 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V3 2/3] dmaengine: dw_dmac: Enhance device tree support   Vinod Koul
• [PATCH V3 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V3 2/3] dmaengine: dw_dmac: Enhance device tree support   Viresh Kumar
• [PATCH V3 2/3] dmaengine: dw_dmac: Enhance device tree support   Vinod Koul
• [PATCH v3 2/3] mtd: sh_flctl: Add DMA capabilty   Bastian Hecht
• [PATCH v3 2/4] arm: bcm2835: convert to the irqchip infrastructure   Thomas Petazzoni
• [PATCH v3 2/4] ARM: dts: omap5: Update I2C with address space and interrupts   Sebastien Guiriec
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH V3 2/4] ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt   Laxman Dewangan
• [PATCHv3 2/4] Input: keypad: Add smsc ece1099 keypad driver   Sourav Poddar
• [PATCHv3 2/4] Input: keypad: Add smsc ece1099 keypad driver   Shubhrajyoti
• [PATCHv3 2/4] Input: keypad: Add smsc ece1099 keypad driver   Dmitry Torokhov
• [PATCHv3 2/4] Input: keypad: Add smsc ece1099 keypad driver   Poddar, Sourav
• [PATCHv3 2/4] Input: keypad: Add smsc ece1099 keypad driver   Dmitry Torokhov
• [PATCHv3 2/4] Input: keypad: Add smsc ece1099 keypad driver   Sourav
• [PATCH v3 2/4] net/cadence: get rid of HAVE_NET_MACB   Joachim Eastwood
• [PATCH v3 2/5] ARM: KVM: arch_timers: Add minimal infrastructure   Christoffer Dall
• [PATCH V3 2/5] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Jon Hunter
• [PATCH V3 2/5] ARM: tegra: simplify DEBUG_LL UART selection options   Stephen Warren
• [PATCH v3 2/5] zynq: use pl310 device tree bindings   Josh Cartwright
• [PATCH v3 2/5] zynq: use pl310 device tree bindings   Arnd Bergmann
• [PATCH v3 2/6] ARM: AT91: Add DT support to AT91RM9200 System Timer   Joachim Eastwood
• [PATCH v3 2/6] ARM: davinci: da850-dm646x: remove the SRAM_VIRT iotable entry   Matt Porter
• [PATCH v3 2/6] ARM: davinci: da850-dm646x: remove the SRAM_VIRT iotable entry   Sekhar Nori
• [PATCH v3 2/6] ARM: davinci: da850-dm646x: remove the SRAM_VIRT iotable entry   Matt Porter
• [PATCH v3 2/6] ARM: EXYNOS: Add support for secure monitor calls   Tomasz Figa
• [PATCH v3 2/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH V3 2/7] ARM: tegra: cpuidle: add CPU resume function   Joseph Lo
• [PATCH v3 2/9] pinctrl: single: support gpio request and free   Haojian Zhuang
• [PATCH v3 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Kishon Vijay Abraham I
• [PATCH V3 3/3] ARM: SPEAr13xx: Pass DW DMAC platform data from DT   Viresh Kumar
• [PATCH V3 3/3] clocksource: time-armada-370-xp converted to clk framework   Gregory CLEMENT
• [PATCH v3 3/3] mtd: sh_flctl: Add device tree support   Bastian Hecht
• [PATCHv3 3/4] arm/dts: omap5-evm: Add keypad support   Sourav Poddar
• [PATCH v3 3/4] ARM: dts: omap5: Update UART with address space and interrupts   Sebastien Guiriec
• [PATCH v3 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Thomas Petazzoni
• [PATCH v3 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Sebastian Hesselbarth
• [PATCH v3 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Thomas Petazzoni
• [PATCH v3 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Sebastian Hesselbarth
• [PATCH v3 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Thomas Petazzoni
• [PATCH v3 3/4] arm: mvebu: move irq controller driver to drivers/irqchip   Andrew Lunn
• [PATCH V3 3/4] ARM: tegra: dts: cardhu: enable SLINK4   Laxman Dewangan
• [PATCH v3 3/4] net/at91_ether: select MACB in Kconfig   Joachim Eastwood
• [PATCH v3 3/5] ARM: KVM: arch_timers: Add guest timer core support   Christoffer Dall
• [PATCH V3 3/5] ARM: OMAP: Add function to request a timer by capability   Jon Hunter
• [PATCH V3 3/5] ARM: tegra: decouple uncompress.h and debug-macro.S   Stephen Warren
• [PATCH V3 3/5] ARM: tegra: decouple uncompress.h and debug-macro.S   Peter De Schrijver
• [PATCH V3 3/5] ARM: tegra: decouple uncompress.h and debug-macro.S   Stephen Warren
• [PATCH V3 3/5] ARM: tegra: decouple uncompress.h and debug-macro.S   Russell King - ARM Linux
• [PATCH v3 3/5] zynq: remove use of CLKDEV_LOOKUP   Josh Cartwright
• [PATCH v3 3/5] zynq: remove use of CLKDEV_LOOKUP   Arnd Bergmann
• [PATCH v3 3/5] zynq: remove use of CLKDEV_LOOKUP   Nick Bowler
• [PATCH v3 3/5] zynq: remove use of CLKDEV_LOOKUP   Josh Cartwright
• [PATCH v3 3/6] ARM: AT91: Add usart/tc/pio/ohci DT clock lookup to AT91RM9200   Joachim Eastwood
• [PATCH v3 3/6] ARM: davinci: da850: changed SRAM allocator to shared ram.   Matt Porter
• [PATCH v3 3/6] ARM: davinci: da850: changed SRAM allocator to shared ram.   Sekhar Nori
• [PATCH v3 3/6] ARM: davinci: da850: changed SRAM allocator to shared ram.   Matt Porter
• [PATCH v3 3/6] ARM: davinci: da850: changed SRAM allocator to shared ram.   Matt Porter
• [PATCH v3 3/6] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.   Tomasz Figa
• [PATCH v3 3/6] ARM: OMAP: iommu: pm runtime save and restore context   Omar Ramirez Luna
• [PATCH V3 3/7] ARM: tegra30: cpuidle: add powered-down state for secondary CPUs   Joseph Lo
• [PATCH v3 3/9] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH v3 3/9] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH v3 4/4] ARM: dts: omap5: Update MMC with address space and interrupts   Sebastien Guiriec
• [PATCH V3 4/4] ARM: tegra: config: enable spi driver for Tegra SLINK controller   Laxman Dewangan
• [PATCH v3 4/4] irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS   Thomas Petazzoni
• [PATCH v3 4/4] net/at91_ether: add pdata flag for reverse Eth addr   Joachim Eastwood
• [PATCH v3 4/5] ARM: annotate VMALLOC_END definition with _AC   Josh Cartwright
• [PATCH v3 4/5] ARM: annotate VMALLOC_END definition with _AC   Arnd Bergmann
• [PATCH v3 4/5] ARM: KVM: arch_timers: Add timer world switch   Christoffer Dall
• [PATCH V3 4/5] ARM: OMAP3: Add generic machine descriptor for boards with OMAP3 GP devices   Jon Hunter
• [PATCH V3 4/5] ARM: tegra: don't include iomap.h from debug-macro.S   Stephen Warren
• [PATCH v3 4/6] ARM: AT91: Add AT91RM9200 DT board   Joachim Eastwood
• [PATCH v3 4/6] ARM: davinci: add platform hook to fetch the SRAM pool   Matt Porter
• [PATCH v3 4/6] ARM: EXYNOS: Add support for Exynos secure firmware   Tomasz Figa
• [PATCH v3 4/6] ARM: OMAP: iommu: optimize save and restore routines   Omar Ramirez Luna
• [PATCH V3 4/7] ARM: tegra30: common: enable csite clock   Joseph Lo
• [PATCH v3 4/9] ARM: dts: support pinctrl single in pxa910   Haojian Zhuang
• [PATCH v3 5/5] ARM: KVM: arch_timers: Wire the init code and config option   Christoffer Dall
• [PATCH V3 5/5] ARM: OMAP: Add DT support for timer driver   Jon Hunter
• [PATCH V3 5/5] ARM: tegra: move debug-macro.S to include/debug   Stephen Warren
• [PATCH v3 5/5] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v3 5/5] zynq: move static peripheral mappings   Arnd Bergmann
• [PATCH v3 5/6] ARM: AT91: Add AT91RM9200 device tree   Joachim Eastwood
• [PATCH v3 5/6] ARM: davinci: Add support for PRUSS on DA850   Matt Porter
• [PATCH v3 5/6] ARM: davinci: Add support for PRUSS on DA850   Sekhar Nori
• [PATCH v3 5/6] ARM: davinci: Add support for PRUSS on DA850   Matt Porter
• [PATCH v3 5/6] ARM: davinci: Add support for PRUSS on DA850   Matt Porter
• [PATCH v3 5/6] ARM: davinci: Add support for PRUSS on DA850   Sekhar Nori
• [PATCH v3 5/6] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Tomasz Figa
• [PATCH v3 5/6] ARM: OMAP: iommu: add device tree support   Omar Ramirez Luna
• [PATCH V3 5/7] ARM: tegra30: clocks: add CPU low-power function into tegra_cpu_car_ops   Joseph Lo
• [PATCH v3 5/7] i2c: omap: wait for transfer completion before sending STP bit   Felipe Balbi
• [PATCH v3 5/9] document: devicetree: bind pinconf with pin-single   Haojian Zhuang
• [PATCH v3 6/6] arm/dts: OMAP3/4: Add iommu nodes   Omar Ramirez Luna
• [PATCH v3 6/6] ARM: AT91: Add AT91RM9200EK board device tree   Joachim Eastwood
• [PATCH v3 6/6] ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up   Tomasz Figa
• [PATCH v3 6/6] uio: uio_pruss: replace private SRAM API with genalloc   Matt Porter
• [PATCH V3 6/7] ARM: tegra30: flowctrl: add cpu_suspend_exter/exit function   Joseph Lo
• [PATCH v3 6/9] tty: pxa: configure pin   Haojian Zhuang
• [PATCH V3 7/7] ARM: tegra30: cpuidle: add powered-down state for CPU0   Joseph Lo
• [PATCH v3 7/9] i2c: pxa: use devm_kzalloc   Haojian Zhuang
• [PATCH v3 8/9] i2c: pxa: configure pinmux   Haojian Zhuang
• [PATCH v3 9/9] pinctrl: single: dump pinmux register value   Haojian Zhuang
• [PATCH v3 9/9] pinctrl: single: dump pinmux register value   Tony Lindgren
• [PATCH v3] Add device tree file for the armadeus apf27   Philippe Reynes
• [PATCH v3] ARM: davinci: dm365 evm: replace V4L2_OUT_CAP_CUSTOM_TIMINGS with V4L2_OUT_CAP_DV_TIMINGS   Prabhakar Lad
• [PATCH v3] ARM: dts: AM33xx: Add SPI node   Philip, Avinash
• [PATCH v3] ARM: dts: AM33xx: Add SPI node   Benoit Cousson
• [PATCH V3] ARM: Kirkwood: new board USI Topkick   Jason Cooper
• [PATCH V3] ARM: Kirkwood: new board USI Topkick   Andrew Lunn
• [PATCH V3] ARM: Kirkwood: new board USI Topkick   Sebastian Hesselbarth
• [PATCH v3] ARM: mach-imx: Fix selection of ARCH_MXC   Fabio Estevam
• [PATCH v3] ARM: mach-imx: Fix selection of ARCH_MXC   Shawn Guo
• [PATCH v3] ARM: mach-imx: Fix selection of ARCH_MXC   Shawn Guo
• [PATCH v3] ARM: mach-imx: Fix selection of ARCH_MXC   Arnd Bergmann
• [PATCH v3] ARM: mxs: Add support for the Armadeus Systems APF28 module   julien.boibessot at free.fr
• [PATCH v3] ARM: mxs: Add support for the Armadeus Systems APF28 module   Shawn Guo
• [PATCH v3] ARM: SMP_TWD: make setup()/stop() reentrant   Linus Walleij
• [PATCH v3] ARM: SMP_TWD: make setup()/stop() reentrant   Santosh Shilimkar
• [PATCH v3] ARM: SMP_TWD: make setup()/stop() reentrant   Linus Walleij
• [PATCHv3] ARM: Sort exception table at compile time   Stephen Boyd
• [PATCHv3] ARM: Sort exception table at compile time   Will Deacon
• [PATCH v3] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Paul Walmsley
• [PATCH v3] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Tony Lindgren
• [PATCH v3] ARM: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set   Jon Hunter
• [PATCH v3] arm: vt8500: Fix build warning in uncompress.h [for 3.7]   Olof Johansson
• [PATCH v3] Enable USB peripheral on dm365 EVM   const at MakeLinux.com
• [PATCH v3] Enable USB peripheral on dm365 EVM   Greg KH
• [PATCH v3] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Kevin Hilman
• [PATCH v3] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Jon Hunter
• [PATCH v3] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Kevin Hilman
• [PATCH v3] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Santosh Shilimkar
• [PATCH v3] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Jon Hunter
• [PATCH v3] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset   Linus Walleij
• [PATCH v3] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH v3] GPIO: Add support for GPIO on CLPS711X-target platform   Russell King - ARM Linux
• [PATCH v3] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH v3] GPIO: Add support for GPIO on CLPS711X-target platform   Russell King - ARM Linux
• [PATCH v3] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH v3] GPIO: Add support for GPIO on CLPS711X-target platform   Russell King - ARM Linux
• [PATCH v3] GPIO: Add support for GPIO on CLPS711X-target platform   Linus Walleij
• [PATCH v3] Introduce minimal irqchip infrastructure   Thomas Petazzoni
• [PATCH v3] media: davinci: vpif: display: separate out subdev from output   Sekhar Nori
• [PATCH V3] mmc: omap_hsmmc: Enable HSPE bit for high speed cards   Hebbar, Gururaja
• [PATCH V3] mmc: omap_hsmmc: Enable HSPE bit for high speed cards   Felipe Balbi
• [PATCH V3] mmc: omap_hsmmc: Enable HSPE bit for high speed cards   Venkatraman S
• [PATCH V3] mmc: omap_hsmmc: Enable HSPE bit for high speed cards   Felipe Balbi
• [PATCH v3] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH v3] pwm: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH v3] pwm: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH v3] pwm: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH v3] pwm: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH v3] pwm: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH v3] pwm: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH v3] regulator: Versatile Express regulator driver   Mark Brown
• [PATCH v3] video: imxfb: Do not crash on reboot   Fabio Estevam
• [PATCH v3] video: imxfb: Do not crash on reboot   Sascha Hauer
• [PATCH v3] video: Versatile Express DVI output driver   Pawel Moll
• [PATCH v3] video: Versatile Express DVI output driver   Pawel Moll
• [PATCH v3] Visstrim SM10: Use mo_version to decide board video mode.   javier Martin
• [PATCHv4 0/2] ARM: I2C: Add device tree bindings to i2c-mux-gpio   Maxime Ripard
• [PATCHv4 0/2] i2c: omap: cleanups   Shubhrajyoti D
• [PATCHv4 0/2] i2c: omap: cleanups   Shubhrajyoti D
• [PATCH v4 0/2] Renesas IPMMU driver for sh7372   Hideki EIRAKU
• [PATCH V4 0/3] Add clock framework for armada 370/XP   Gregory CLEMENT
• [PATCH V4 0/4] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH V4 0/4] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH V4 0/4] ARM: tegra: Enable SLINK controller driver   Stephen Warren
• [PATCH V4 0/4] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH V4 0/4] ARM: tegra: Enable SLINK controller driver   Stephen Warren
• [PATCH V4 0/4] ARM: tegra: Enable SLINK controller driver   Laxman Dewangan
• [PATCH v4 0/5] Add support to enable ARM PMU for EXYNOS   Chanho Park
• [PATCH V4 0/5] ARM: OMAP2+: Add device-tree support for timers   Jon Hunter
• [PATCH v4 0/5] rtc: omap dt support (for am33xx)   Afzal Mohammed
• [PATCH v4 0/5] zynq subarch cleanups   Josh Cartwright
• [PATCH v4 0/5] zynq subarch cleanups   Josh Cartwright
• [PATCH v4 0/5] zynq subarch cleanups   Josh Cartwright
• [PATCH v4 0/5] zynq subarch cleanups   Michal Simek
• [PATCH v4 0/5] zynq subarch cleanups   Josh Cartwright
• [PATCH v4 0/5] zynq subarch cleanups   Michal Simek
• [PATCH v4 0/6] omap iommu changes to remove plat includes   Tony Lindgren
• [PATCH V4 0/7] ARM: tegra30: cpuidle: add a powered-down state   Joseph Lo
• [PATCH V4 0/7] ARM: tegra30: cpuidle: add a powered-down state   Stephen Warren
• [PATCH v4 0/7] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v4 0/7] uio_pruss cleanup and platform support   Sekhar Nori
• [PATCH v4 0/7] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v4 0/7] uio_pruss cleanup and platform support   Matt Porter
• [PATCH v4 0/7] uio_pruss cleanup and platform support   Sekhar Nori
• [PATCH v4 0/8] watchdog: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [PATCH v4 00/10] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Nicolas Ferre
• [PATCH v4 01/10] net/macb: Add support for Gigabit Ethernet mode   Nicolas Ferre
• [PATCH v4 02/10] net/macb: memory barriers cleanup   Nicolas Ferre
• [PATCH v4 03/10] net/macb: change debugging messages   Nicolas Ferre
• [PATCH v4 04/10] net/macb: remove macb_get_drvinfo()   Nicolas Ferre
• [PATCH v4 05/10] net/macb: tx status is more than 8 bits now   Nicolas Ferre
• [PATCH v4 06/10] net/macb: clean up ring buffer logic   Nicolas Ferre
• [PATCH v4 07/10] net/macb: ethtool interface: add register dump feature   Nicolas Ferre
• [PATCH v4 08/10] net/macb: better manage tx errors   Nicolas Ferre
• [PATCH v4 09/10] net/macb: Offset first RX buffer by two bytes   Nicolas Ferre
• [PATCH v4 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Fabio Estevam
• [PATCH v4 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Mauro Carvalho Chehab
• [PATCH v4 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Sascha Hauer
• [PATCH v4 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Fabio Estevam
• [PATCH v4 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Guennadi Liakhovetski
• [PATCH v4 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Mauro Carvalho Chehab
• [PATCH v4 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Sascha Hauer
• [PATCH v4 1/2] ARM: clk-imx27: Add missing clock for mx2-camera   Mauro Carvalho Chehab
• [PATCH v4 1/2] ARM: davinci: dm365: add support for v4l2 video display   Sekhar Nori
• [PATCHv4 1/2] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti D
• [PATCHv4 1/2] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti D
• [PATCHv4 1/2] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCH v4 1/2] iommu/shmobile: Add iommu driver for Renesas IPMMU modules   Hideki EIRAKU
• [PATCH V4 1/3] clk: mvebu: add armada-370-xp specific clocks   Gregory CLEMENT
• [PATCH v4 1/3] Input: egalax_ts: get gpio from devicetree node   Arnd Bergmann
• [PATCH v4 1/3] Input: egalax_ts: get gpio from devicetree node   Hui Wang
• [PATCH v4 1/3] Input: egalax_ts: get gpio from devicetree node   Arnd Bergmann
• [PATCH V4 1/5] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V4 1/5] ARM: dts: OMAP: Add timer nodes   Rob Herring
• [PATCH V4 1/5] ARM: dts: OMAP: Add timer nodes   Benoit Cousson
• [PATCH V4 1/5] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V4 1/5] ARM: dts: OMAP: Add timer nodes   Hiremath, Vaibhav
• [PATCH V4 1/5] ARM: dts: OMAP: Add timer nodes   Benoit Cousson
• [PATCH V4 1/5] ARM: dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH V4 1/5] ARM: dts: OMAP: Add timer nodes   Hiremath, Vaibhav
• [PATCH v4 1/5] ARM: EXYNOS: Add set_irq_affinity function for combiner_irq   Chanho Park
• [PATCH v4 1/5] ARM: EXYNOS: Add set_irq_affinity function for combiner_irq   Kukjin Kim
• [PATCH v4 1/5] rtc: omap: kicker mechanism support   Afzal Mohammed
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Michal Simek
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Michal Simek
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Michal Simek
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Michal Simek
• [PATCH V4 1/7] ARM: tegra: cpuidle: separate cpuidle driver for different chips   Joseph Lo
• [PATCH v4 1/7] uio: uio_pruss: replace private SRAM API with genalloc   Matt Porter
• [PATCH v4 1/7] uio: uio_pruss: replace private SRAM API with genalloc   Matt Porter
• [PATCH v4 1/7] uio: uio_pruss: replace private SRAM API with genalloc   Hans J. Koch
• [PATCH v4 1/8] dt: add helper inline for retrieving timeout-sec property   Fabio Porcedda
• [PATCH v4 1/8] dt: add helper inline for retrieving timeout-sec property   Rob Herring
• [PATCH v4 1/8] dt: add helper inline for retrieving timeout-sec property   Fabio Porcedda
• [PATCH v4 10/10] net/macb: add pinctrl consumer support   Nicolas Ferre
• [PATCH v4 2/2] ARM: mach-shmobile: sh7372: Add IPMMU device   Hideki EIRAKU
• [PATCHv4 2/2] i2c: omap: make reset a seperate function   Shubhrajyoti D
• [PATCHv4 2/2] i2c: omap: make reset a seperate function   Shubhrajyoti D
• [PATCHv4 2/2] i2c: omap: make reset a seperate function   Felipe Balbi
• [PATCH v4 2/2] mx2_camera: Fix regression caused by clock conversion   Fabio Estevam
• [PATCH v4 2/2] mx2_camera: Fix regression caused by clock conversion   Mauro Carvalho Chehab
• [PATCH V4 2/3] clk: armada-370-xp: add support for clock framework   Gregory CLEMENT
• [PATCH V4 2/4] ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt   Laxman Dewangan
• [PATCH v4 2/5] ARM: davinci: remove rtc kicker release   Afzal Mohammed
• [PATCH v4 2/5] ARM: EXYNOS: Correct combined IRQs for exynos4   Chanho Park
• [PATCH v4 2/5] ARM: EXYNOS: Correct combined IRQs for exynos4   Kukjin Kim
• [PATCH v4 2/5] ARM: EXYNOS: Correct combined IRQs for exynos4   Chanho Park
• [PATCH V4 2/5] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Jon Hunter
• [PATCH v4 2/5] zynq: use pl310 device tree bindings   Josh Cartwright
• [PATCH v4 2/5] zynq: use pl310 device tree bindings   Josh Cartwright
• [PATCH v4 2/5] zynq: use pl310 device tree bindings   Michal Simek
• [PATCH v4 2/5] zynq: use pl310 device tree bindings   Michal Simek
• [PATCH v4 2/6] misc: Generic on-chip SRAM allocation driver   Matt Porter
• [PATCH v4 2/6] misc: Generic on-chip SRAM allocation driver   Philipp Zabel
• [PATCH v4 2/7] ARM: davinci: sram: switch from iotable to ioremapped regions   Matt Porter
• [PATCH V4 2/7] ARM: tegra: cpuidle: add CPU resume function   Joseph Lo
• [PATCH v4 2/8] watchdog: core: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [PATCH V4 3/3] clocksource: time-armada-370-xp converted to clk framework   Gregory CLEMENT
• [PATCH V4 3/4] ARM: tegra: dts: cardhu: enable SLINK4   Laxman Dewangan
• [PATCH V4 3/4] ARM: tegra: dts: cardhu: enable SLINK4   Stephen Warren
• [PATCH V4 3/4] ARM: tegra: dts: cardhu: enable SLINK4   Laxman Dewangan
• [PATCH v4 3/5] ARM: EXYNOS: Enable PMUs for exynos4   Chanho Park
• [PATCH v4 3/5] ARM: EXYNOS: Enable PMUs for exynos4   Kukjin Kim
• [PATCH V4 3/5] ARM: OMAP: Add function to request a timer by capability   Jon Hunter
• [PATCH v4 3/5] rtc: omap: dt support   Afzal Mohammed
• [PATCH v4 3/5] rtc: omap: dt support   Daniel Mack
• [PATCH v4 3/5] rtc: omap: dt support   Afzal Mohammed
• [PATCH v4 3/5] zynq: remove use of CLKDEV_LOOKUP   Josh Cartwright
• [PATCH v4 3/5] zynq: remove use of CLKDEV_LOOKUP   Josh Cartwright
• [PATCH v4 3/5] zynq: remove use of CLKDEV_LOOKUP   Michal Simek
• [PATCH v4 3/5] zynq: remove use of CLKDEV_LOOKUP   Michal Simek
• [PATCH v4 3/7] ARM: davinci: da850: changed SRAM allocator to shared ram.   Matt Porter
• [PATCH V4 3/7] ARM: tegra30: cpuidle: add powered-down state for secondary CPUs   Joseph Lo
• [PATCH V4 3/7] ARM: tegra30: cpuidle: add powered-down state for secondary CPUs   Colin Cross
• [PATCH V4 3/7] ARM: tegra30: cpuidle: add powered-down state for secondary CPUs   Joseph Lo
• [PATCH v4 3/8] watchdog: orion_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH V4 4/4] ARM: tegra: config: enable spi driver for Tegra SLINK controller   Laxman Dewangan
• [PATCH v4 4/5] ARM: annotate VMALLOC_END definition with _AC   Josh Cartwright
• [PATCH v4 4/5] ARM: annotate VMALLOC_END definition with _AC   Josh Cartwright
• [PATCH v4 4/5] ARM: annotate VMALLOC_END definition with _AC   Michal Simek
• [PATCH v4 4/5] ARM: annotate VMALLOC_END definition with _AC   Arnd Bergmann
• [PATCH v4 4/5] ARM: annotate VMALLOC_END definition with _AC   Michal Simek
• [PATCH v4 4/5] ARM: annotate VMALLOC_END definition with _AC   Josh Cartwright
• [PATCH v4 4/5] ARM: EXYNOS: Add arm-pmu DT binding for exynos5250   Chanho Park
• [PATCH v4 4/5] ARM: EXYNOS: Add arm-pmu DT binding for exynos5250   Kukjin Kim
• [PATCH V4 4/5] ARM: OMAP3: Add generic machine descriptor for boards with OMAP3 GP devices   Jon Hunter
• [PATCH v4 4/5] rtc: omap: depend on am33xx   Afzal Mohammed
• [PATCH v4 4/7] ARM: davinci: add platform hook to fetch the SRAM pool   Matt Porter
• [PATCH V4 4/7] ARM: tegra30: common: enable csite clock   Joseph Lo
• [PATCH v4 4/8] watchdog: pnx4008: add timeout-sec property binding   Fabio Porcedda
• [PATCH v4 5/5] ARM: EXYNOS: Add arm-pmu DT binding for exynos421x   Chanho Park
• [PATCH v4 5/5] ARM: EXYNOS: Add arm-pmu DT binding for exynos421x   Kukjin Kim
• [PATCH V4 5/5] ARM: OMAP: Add DT support for timer driver   Jon Hunter
• [PATCH v4 5/5] rtc: omap: Add runtime pm support   Afzal Mohammed
• [PATCH v4 5/5] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v4 5/5] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v4 5/5] zynq: move static peripheral mappings   Nick Bowler
• [PATCH v4 5/5] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v4 5/5] zynq: move static peripheral mappings   Nick Bowler
• [PATCH v4 5/5] zynq: move static peripheral mappings   Josh Cartwright
• [PATCH v4 5/5] zynq: move static peripheral mappings   Michal Simek
• [PATCH v4 5/5] zynq: move static peripheral mappings   Michal Simek
• [PATCH v4 5/7] ARM: davinci: add DA850 PRUSS support   Matt Porter
• [PATCH V4 5/7] ARM: tegra30: clocks: add CPU low-power function into tegra_cpu_car_ops   Joseph Lo
• [PATCH v4 5/8] watchdog: s3c2410_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v4 6/7] ARM: davinci: clean up DA850 EVM include ordering   Matt Porter
• [PATCH v4 6/7] ARM: davinci: clean up DA850 EVM include ordering   Sekhar Nori
• [PATCH V4 6/7] ARM: tegra30: flowctrl: add cpu_suspend_exter/exit function   Joseph Lo
• [PATCH v4 6/8] watchdog: at91sam9_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v4 7/7] ARM: davinci: register pruss_uio device on DA850 EVM   Matt Porter
• [PATCH v4 7/7] ARM: davinci: register pruss_uio device on DA850 EVM   Sekhar Nori
• [PATCH v4 7/7] ARM: davinci: register pruss_uio device on DA850 EVM   Matt Porter
• [PATCH V4 7/7] ARM: tegra30: cpuidle: add powered-down state for CPU0   Joseph Lo
• [PATCH v4 7/8] watchdog: orion_wdt: move the min_timeout initialization   Fabio Porcedda
• [PATCHv4 8/8] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Paul Walmsley
• [PATCHv4 8/8] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Kevin Hilman
• [PATCHv4 8/8] ARM: OMAP3: do not delete per_clkdm autodeps during idle   Tero Kristo
• [PATCH v4 8/8] watchdog: WatchDog Timer Driver Core - fix comment   Fabio Porcedda
• [PATCH v4] Add basic address decoding support for Marvell 370/XP   Jason Cooper
• [PATCH V4] ARM: implement debug_ll_io_init()   Stephen Warren
• [PATCH v4] ARM: SMP_TWD: make setup()/stop() reentrant   Linus Walleij
• [PATCH v4] ARM: SMP_TWD: make setup()/stop() reentrant   Santosh Shilimkar
• [PATCH v4] ARM: SMP_TWD: make setup()/stop() reentrant   Shawn Guo
• [PATCH v4] Enable USB peripheral on dm365 EVM   Constantine Shulyupin
• [PATCH v4] Enable USB peripheral on dm365 EVM   Greg KH
• [PATCH v4] Enable USB peripheral on dm365 EVM   Sekhar Nori
• [PATCH v4] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH v4] GPIO: Add support for GPIO on CLPS711X-target platform   Russell King - ARM Linux
• [PATCH v4] GPIO: Add support for GPIO on CLPS711X-target platform   Linus Walleij
• [PATCH v4] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH v4] GPIO: Add support for GPIO on CLPS711X-target platform   Linus Walleij
• [PATCHv4] Input: keypad: Add smsc ece1099 keypad driver   Sourav Poddar
• [PATCHv4] Input: keypad: Add smsc ece1099 keypad driver   Sourav
• [PATCHv4] Input: keypad: Add smsc ece1099 keypad driver   Dmitry Torokhov
• [PATCHv4] Input: keypad: Add smsc ece1099 keypad driver   Sourav
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Wolfram Sang
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH v4] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH v4] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH v4] pwm: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCH v4] pwm: vt8500: Update vt8500 PWM driver support   Arnd Bergmann
• [PATCH v4] pwm: vt8500: Update vt8500 PWM driver support   Chris Brand
• [PATCH v4] pwm: vt8500: Update vt8500 PWM driver support   Arnd Bergmann
• [PATCH V4 REPOST] ARM: implement debug_ll_io_init()   Stephen Warren
• [PATCH v4 RESEND 1/3] Input: egalax_ts: get gpio from devicetree   Shawn Guo
• [PATCH v4 RESEND 1/3] Input: egalax_ts: get gpio from devicetree   Hui Wang
• [PATCH v4 RESEND 1/3] Input: egalax_ts: get gpio from devicetree   Russell King - ARM Linux
• [PATCHv5 0/2] ARM: I2C: Add device tree bindings to i2c-mux-gpio   Maxime Ripard
• [PATCH v5 0/5] Add support to enable ARM PMU for EXYNOS   Chanho Park
• [PATCH v5 1/5] ARM: EXYNOS: Add set_irq_affinity function for combiner_irq   Chanho Park
• [PATCH v5 2/5] ARM: EXYNOS: Correct combined IRQs for exynos4   Chanho Park
• [PATCH V5 3/5] ARM: bcm2835: add system timer   Domenico Andreoli
• [PATCH v5 3/5] ARM: EXYNOS: Enable PMUs for exynos4   Chanho Park
• [PATCH v5 3/5] ARM: EXYNOS: Enable PMUs for exynos4   Olof Johansson
• [PATCH v5 3/5] ARM: EXYNOS: Enable PMUs for exynos4   Chanho Park
• [PATCH v5 3/5] ARM: EXYNOS: Enable PMUs for exynos4   Will Deacon
• [PATCH v5 3/5] ARM: EXYNOS: Enable PMUs for exynos4   Chanho Park
• [PATCH v5 3/5] ARM: EXYNOS: Enable PMUs for exynos4   Will Deacon
• [PATCH v5 4/5] ARM: EXYNOS: Add arm-pmu DT binding for exynos5250   Chanho Park
• [PATCH v5 5/5] ARM: EXYNOS: Add arm-pmu DT binding for exynos421x   Chanho Park
• [PATCH v5 5/7] ARM: davinci: da8xx: add DA850 PRUSS support   Matt Porter
• [PATCH v5 7/7] ARM: davinci: da850 evm: register uio_pruss device   Matt Porter
• [PATCH v5 7/7] ARM: davinci: da850 evm: register uio_pruss device   Sekhar Nori
• [PATCH v5] gpio/omap: fix off-mode bug: clear debounce settings on free/reset   Jon Hunter
• [PATCH v5] gpio/omap: fix off-mode bug: clear debounce settings on free/reset   Kevin Hilman
• [PATCH v5] gpio/omap: fix off-mode bug: clear debounce settings on free/reset   Jon Hunter
• [PATCH v5] gpio/omap: fix off-mode bug: clear debounce settings on free/reset   Linus Walleij
• [PATCH v5] pwm: vt8500: Update vt8500 PWM driver support   Tony Prisk
• [PATCHv6 0/2] Add support for the OLED in the CFA10036   Maxime Ripard
• [PATCHv6 0/2] ARM: I2C: Add device tree bindings to i2c-mux-gpio   Maxime Ripard
• [PATCH v6 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• [PATCH v6 0/5] watchdog: orion_wdt & at91sam9_wdt: improve dt support   Fabio Porcedda
• [PATCHv6 01/11] ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable   Paul Walmsley
• [PATCHv6 01/11] ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable   Paul Walmsley
• [PATCHv6 01/11] ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable   Tony Lindgren
• [PATCH v6 1/5] watchdog: core: dt: add support for the timeout device tree property   Fabio Porcedda
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Vinod Koul
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Shawn Guo
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Stephen Warren
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCH V6 2/2] video: drm: exynos: Add device tree support   Stephen Warren
• [PATCH v6 2/5] watchdog: orion_wdt: dt: add the timeout property binding   Fabio Porcedda
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Andrew Lunn
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Andrew Lunn
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Andrew Lunn
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Andrew Lunn
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v6 3/5] watchdog: at91sam9_wdt: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Russell King - ARM Linux
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Russell King - ARM Linux
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH v6 4/5] ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCH v6 5/5] ARM: at91/dts: evk-pro3: enable watchdog   Fabio Porcedda
• [PATCH v6] Enable USB peripheral mode on dm365 EVM   Constantine Shulyupin
• [PATCH v6] Enable USB peripheral mode on dm365 EVM   Sergei Shtylyov
• [PATCH v6] Enable USB peripheral mode on dm365 EVM   Constantine Shulyupin
• [PATCH v6] Enable USB peripheral mode on dm365 EVM   Greg KH
• [PATCH v6] Enable USB peripheral mode on dm365 EVM   Felipe Balbi
• [PATCHv7 0/2] ARM: I2C: Add device tree bindings to i2c-mux-gpio   Maxime Ripard
• [PATCH v7 0/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v7 0/3] Yet another update for the Cortex-M3 series   Uwe Kleine-König
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v7 1/3] ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15   Uwe Kleine-König
• [PATCH v7 1/3] watchdog: at91sam9_wdt: add device tree   Andrew Lunn
• [PATCH v7 1/3] watchdog: at91sam9_wdt: add device tree   Fabio Porcedda
• [PATCH v7 1/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v7 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v7 2/3] ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCH v7 2/3] Cortex-M3: Add base support for Cortex-M3   Uwe Kleine-König
• [PATCH v7 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v7 2/5] usb: s3c-hsotg: Adding phy driver support   Felipe Balbi
• [PATCH v7 2/5] usb: s3c-hsotg: Adding phy driver support   Lukasz Majewski
• [PATCH v7 3/3] ARM: at91/dts: evk-pro3: enable watchdog   Fabio Porcedda
• [PATCH v7 3/3] Cortex-M3: Add support for exception handling   Uwe Kleine-König
• [PATCH v7 3/5] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v7 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v7 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v7] Enable USB peripheral mode on dm365 EVM   Constantine Shulyupin
• [PATCH v7] Enable USB peripheral mode on dm365 EVM   Felipe Balbi
• [PATCH v7] Initialize USB on dm365 EVM   Constantine Shulyupin
• [PATCH v8 0/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v8 0/6] OMAP-GPMC cleanup for generic timing   Afzal Mohammed
• [PATCH v8 0/6] OMAP-GPMC cleanup for generic timing   Mohammed, Afzal
• [PATCH v8 1/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v8 1/6] ARM: OMAP2+: nand: unify init functions   Afzal Mohammed
• [PATCH v8 1/6] ARM: OMAP2+: nand: unify init functions   Mohammed, Afzal
• [PATCH v8 2/3] ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCH v8 2/6] ARM: OMAP2+: nand: remove redundant rounding   Afzal Mohammed
• [PATCH v8 3/3] ARM: at91/dts: evk-pro3: enable watchdog   Fabio Porcedda
• [PATCH v8 3/6] ARM: OMAP2+: gpmc: handle additional timings   Afzal Mohammed
• [PATCH v8 4/6] ARM: OMAP2+: onenand: refactor for clarity   Afzal Mohammed
• [PATCH v8 5/6] ARM: OMAP2+: GPMC: Remove unused OneNAND get_freq() platform function   Afzal Mohammed
• [PATCH v8 6/6] ARM: OMAP2+: gpmc: remove cs# in sync clk div calc   Afzal Mohammed
• [PATCH v9 0/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Tero Kristo
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Paul Walmsley
• [PATCH v9 1/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCHv9 1/8] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Tero Kristo
• [PATCHv9 1/8] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Paul Walmsley
• [PATCH v9 2/3] ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCHv9 2/8] ARM: OMAP4: PM: add errata support   Tero Kristo
• [PATCH v9 3/3] ARM: at91/dts: evk-pro3: enable watchdog   Fabio Porcedda
• [PATCHv9 3/8] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change.   Tero Kristo
• [PATCHv9 4/8] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv9 5/8] ARM: OMAP4: PM: put all domains to OSWR during suspend   Tero Kristo
• [PATCHv9 6/8] ARM: OMAP4: retrigger localtimers after re-enabling gic   Tero Kristo
• [PATCHv9 6/8] ARM: OMAP4: retrigger localtimers after re-enabling gic   Paul Walmsley
• [PATCHv9 7/8] ARM: OMAP: PM: update target fpwrst to what pwrdm can reach   Tero Kristo
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   Tero Kristo
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   Felipe Balbi
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   Tero Kristo
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   Felipe Balbi
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   Tero Kristo
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   Felipe Balbi
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   kishon
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   Felipe Balbi
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   kishon
• [PATCHv9 8/8] ARM: OMAP4: USB: power down MUSB PHY if not used   Paul Walmsley
• [PULL REQ] IXP4xx changes for Linux 3.7   Krzysztof Halasa
• [PULL REQ] IXP4xx changes for Linux 3.7   Arnd Bergmann
• [PULL REQ] IXP4xx changes for Linux 3.7   Krzysztof Halasa
• [PULL REQ] IXP4xx changes for Linux 3.7   Jason Cooper
• [PULL REQ] IXP4xx changes for Linux 3.7   Richard Cochran
• [PULL REQ] IXP4xx changes for Linux 3.7   Russell King - ARM Linux
• [PULL REQ] IXP4xx changes for Linux 3.7   Ryan Mallon
• [PULL REQ] IXP4xx changes for Linux 3.7   Arnd Bergmann
• [PULL REQ] IXP4xx changes for Linux 3.7   Jason Cooper
• [PULL REQUEST] ARM: vt8500: Cleanup for 3.8   Tony Prisk
• [PULL REQUEST] ARM: vt8500: Cleanup for 3.8   Olof Johansson
• [REMINDER: PATCH 1/1] mtd:nand:clk: preparation for switch to common clock framework   Artem Bityutskiy
• [REMINDER: PATCH 1/1] mtd:nand:clk: preparation for switch to common clock framework   Sekhar Nori
• [REMINDER: PATCH 1/1] mtd:nand:clk: preparation for switch to common clock framework   Artem Bityutskiy
• [RESEND][PATCH 0/2] Add spidev to the CFA-10049   Maxime Ripard
• [RESEND][PATCH 0/2] Add spidev to the CFA-10049   Maxime Ripard
• [RESEND] [PATCH 3.6.0- 0/6] ARM: use module_platform_driver macro   Srinivas KANDAGATLA
• [RESEND] [PATCH 3.6.0- 1/6] ARM/omap1: use module_platform_driver macro   Srinivas KANDAGATLA
• [RESEND] [PATCH 3.6.0- 2/6] ARM/omap2: use module_platform_driver macro   Srinivas KANDAGATLA
• [RESEND] [PATCH 3.6.0- 3/6] ARM/pxa: use module_platform_driver macro   Srinivas KANDAGATLA
• [RESEND] [PATCH 3.6.0- 3/6] ARM/pxa: use module_platform_driver macro   Igor Grinberg
• [RESEND] [PATCH 3.6.0- 3/6] ARM/pxa: use module_platform_driver macro   Haojian Zhuang
• [RESEND] [PATCH 3.6.0- 4/6] ARM/pxa: use module_platform_driver macro   Srinivas KANDAGATLA
• [RESEND] [PATCH 3.6.0- 5/6] ARM/omap: use module_platform_driver macro   Srinivas KANDAGATLA
• [RESEND] [PATCH 3.6.0- 6/6] omap_rng: use module_platform_driver macro   Srinivas KANDAGATLA
• [RESEND][PATCH] ASoC: ams-delta: Convert to use snd_soc_register_card()   Janusz Krzysztofik
• [RESEND][PATCH] ASoC: ams-delta: Convert to use snd_soc_register_card()   Janusz Krzysztofik
• [RESEND][PATCH] ASoC: ams-delta: Convert to use snd_soc_register_card()   Mark Brown
• [RESEND][PATCH v4] gpio/omap: fix off-mode bug: clear debounce settings on free/reset   Jon Hunter
• [RESEND][PATCH v4] gpio/omap: fix off-mode bug: clear debounce settings on free/reset   Jon Hunter
• [RESEND PATCH 0/4] Fix PROT_NONE page permissions when !CPU_USE_DOMAINS   Will Deacon
• [RESEND PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Ulf Hansson
• [RESEND PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Linus Walleij
• [RESEND PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Johan Rudholm
• [RESEND PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Russell King - ARM Linux
• [RESEND PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Russell King - ARM Linux
• [RESEND PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Ulf Hansson
• [RESEND PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Russell King - ARM Linux
• [RESEND PATCH 1/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Ulf Hansson
• [RESEND PATCH 1/4] ARM: mm: use pteval_t to represent page protection values   Will Deacon
• [RESEND PATCH 2/2] ARM: kexec: Check segment memory addresses   Aaro Koskinen
• [RESEND PATCH 2/2] ARM: kexec: Check segment memory addresses   Will Deacon
• [RESEND PATCH 2/2] ARM: kexec: Check segment memory addresses   Aaro Koskinen
• [RESEND PATCH 2/2] ARM: kexec: Check segment memory addresses   Will Deacon
• [RESEND PATCH 2/2] mmc: mmci: Switching off HWFC for SDIO depends on MCLK   Ulf Hansson
• [RESEND PATCH 2/2] mmc: mmci: Switching off HWFC for SDIO depends on MCLK   Linus Walleij
• [RESEND PATCH 2/2] mmc: mmci: Switching off HWFC for SDIO depends on MCLK   Johan Rudholm
• [RESEND PATCH 2/4] ARM: mm: don't use the access flag permissions mechanism for classic MMU   Will Deacon
• [RESEND PATCH 3/4] ARM: mm: introduce L_PTE_VALID for page table entries   Will Deacon
• [RESEND PATCH 4/4] ARM: mm: introduce present, faulting entries for PAGE_NONE   Will Deacon
• [RESEND PATCH v3 1/2] i2c: change id to let i2c-gpio work   Bo Shen
• [RESEND PATCH v3 1/2] i2c: change id to let i2c-gpio work   Greg KH
• [RESEND PATCH v3 2/2] i2c: change id to let i2c-at91 work   Bo Shen
• [RESEND PATCH v3 2/2] i2c: change id to let i2c-at91 work   Greg KH
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Al Viro
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Daniel Mack
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Al Viro
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Al Viro
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Daniel Mack
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Al Viro
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Al Viro
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Al Viro
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Catalin Marinas
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Al Viro
• [revert request for commit 9fff2fa] Re: [git pull] signals pile 3   Catalin Marinas
• [RFC/NOT FOR MERGING 0/5] OMAP PM patches   Felipe Balbi
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Felipe Balbi
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Kevin Hilman
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Felipe Balbi
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Kevin Hilman
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Felipe Balbi
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Kevin Hilman
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Felipe Balbi
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Kevin Hilman
• [RFC/NOT FOR MERGING 1/5] arm: omap: fix up _od_suspend_noirq and _od_resume_noirq   Kevin Hilman
• [RFC/NOT FOR MERGING 2/5] arm: omap: don't forcefully runtime suspend a device   Felipe Balbi
• [RFC/NOT FOR MERGING 2/5] arm: omap: don't forcefully runtime suspend a device   Kevin Hilman
• [RFC/NOT FOR MERGING 2/5] arm: omap: don't forcefully runtime suspend a device   Felipe Balbi
• [RFC/NOT FOR MERGING 3/5] arm: omap: introduce other PM methods   Felipe Balbi
• [RFC/NOT FOR MERGING 3/5] arm: omap: introduce other PM methods   Felipe Balbi
• [RFC/NOT FOR MERGING 3/5] arm: omap: introduce other PM methods   Kevin Hilman
• [RFC/NOT FOR MERGING 3/5] arm: omap: introduce other PM methods   Felipe Balbi
• [RFC/NOT FOR MERGING 4/5] i2c: omap: don't re-enable IRQs after masking them   Felipe Balbi
• [RFC/NOT FOR MERGING 4/5] i2c: omap: don't re-enable IRQs after masking them   Felipe Balbi
• [RFC/NOT FOR MERGING 4/5] i2c: omap: don't re-enable IRQs after masking them   Kevin Hilman
• [RFC/NOT FOR MERGING 5/5] i2c: omap: introduce suspend/resume methods   Felipe Balbi
• [RFC/PATCH] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete   Felipe Balbi
• [RFC/PATCH] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete   Felipe Balbi
• [RFC/PATCH] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete   Felipe Balbi
• [RFC/PATCH] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete   Venkatraman S
• [RFC/PATCHv3 4/4] gpio: smscece: Add support for gpio IO expander feature   Sourav Poddar
• [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Marek Szyprowski
• [RFC 0/2] DMA-mapping & IOMMU - physically contiguous allocations   Inki Dae
• [RFC 0/2] Representing interrupt affinity in devicetree   Mark Rutland
• [RFC 0/6] sched: packing small tasks   Vincent Guittot
• [RFC 0/7] Capebus; a bus for SoCs using simple expansion connectors   Pantelis Antoniou
• [RFC 0/7] Capebus; a bus for SoCs using simple expansion connectors   Russ Dill
• [RFC 0/7] Capebus; a bus for SoCs using simple expansion connectors   Pantelis Antoniou
• [RFC 00/11] Convert Kirkwood to pinctrl   Andrew Lunn
• [RFC 00/11] Convert Kirkwood to pinctrl   Andrew Lunn
• [RFC 00/11] Convert Kirkwood to pinctrl   Thomas Petazzoni
• [RFC 00/11] Convert Kirkwood to pinctrl   Andrew Lunn
• [RFC 00/11] Convert Kirkwood to pinctrl   Sebastian Hesselbarth
• [RFC 00/11] Convert Kirkwood to pinctrl   Andrew Lunn
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Russell King - ARM Linux
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Russell King - ARM Linux
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Russell King - ARM Linux
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Russell King - ARM Linux
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Alan Cox
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Sourav
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Kevin Hilman
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Sourav
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Russell King - ARM Linux
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Sourav
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Russell King - ARM Linux
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Jon Hunter
• [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion   Grazvydas Ignotas
• [RFC 01/11] ARM: Kirkwood: Allow use of pinctrl   Andrew Lunn
• [RFC 01/24] SERIAL: omap: fix set_mctrl() breakage   Russell King
• [RFC 02/11] ARM: Kirkwood: Allow use of MVEBU GPIO driver.   Andrew Lunn
• [RFC 02/24] SERIAL: omap: fix bit masks for software flow control   Russell King
• [RFC 03/11] ARM: Kirkwood: Convert TS219 to pinctrl.   Andrew Lunn
• [RFC 03/24] SERIAL: omap: remove setting of EFR SCD bit   Russell King
• [RFC 04/11] ARM: Kirkwood: Convert iConnect to pinctrl.   Andrew Lunn
• [RFC 04/24] SERIAL: omap: fix MCR TCRTLR bit handling   Russell King
• [RFC 05/11] ARM: Kirkwood: Convert dnskw to pinctrl   Andrew Lunn
• [RFC 05/24] SERIAL: omap: no need to re-read EFR   Russell King
• [RFC 06/11] ARM: Kirkwood: Convert dockstar to pinctrl.   Andrew Lunn
• [RFC 06/24] SERIAL: omap: allow hardware assisted rts/cts modes to be disabled   Russell King
• [RFC 07/11] ARM: Kirkwood: Convert dreamplug to pinctrl.   Andrew Lunn
• [RFC 07/24] SERIAL: omap: allow hardware assisted IXANY mode to be disabled   Russell King
• [RFC 08/11] ARM: Kirkwood: Convert GoFlex Net to pinctrl.   Andrew Lunn
• [RFC 08/24] SERIAL: core: use local variable uport in uart_set_termios()   Russell King
• [RFC 09/11] ARM: Kirkwood: Convert ib62x0 to pinctrl.   Andrew Lunn
• [RFC 09/24] SERIAL: core: add hardware assisted s/w flow control support   Russell King
• [RFC 1/2] common: DMA-mapping: add DMA_ATTR_FORCE_CONTIGUOUS attribute   Marek Szyprowski
• [RFC 1/6] Revert "sched: introduce temporary FAIR_GROUP_SCHED dependency for load-tracking"   Vincent Guittot
• [RFC 1/7] capebus: Core capebus support   Pantelis Antoniou
• [RFC 1/7] capebus: Core capebus support   Russ Dill
• [RFC 1/7] capebus: Core capebus support   Pantelis Antoniou
• [RFC 1/7] capebus: Core capebus support   Russ Dill
• [RFC 10/11] ARM: Kirkwood: Convert lsxl boards to pinctrl.   Andrew Lunn
• [RFC 10/24] SERIAL: core: add hardware assisted h/w flow control support   Russell King
• [RFC 11/11] ARM: Kirkwood: Convert IX2-200 to pinctrl.   Andrew Lunn
• [RFC 11/24] SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control   Russell King
• [RFC 12/24] SERIAL: omap: fix hardware assisted flow control   Russell King
• [RFC 13/24] SERIAL: omap: configure xon/xoff before setting modem control lines   Russell King
• [RFC 14/24] SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios   Russell King
• [RFC 15/24] SERIAL: omap: don't read back LCR/MCR/EFR   Russell King
• [RFC 16/24] SERIAL: omap: simplify   Russell King
• [RFC 17/24] SERIAL: omap: always set TCR   Russell King
• [RFC 18/24] SERIAL: omap: move xon/xoff setting earlier   Russell King
• [RFC 19/24] SERIAL: omap: simplify (2)   Russell King
• [RFC 2/2] ARM: dma-mapping: add support for DMA_ATTR_FORCE_CONTIGUOUS attribute   Marek Szyprowski
• [RFC 2/6] sched: add a new SD SHARE_POWERLINE flag for sched_domain   Vincent Guittot
• [RFC 2/6] sched: add a new SD SHARE_POWERLINE flag for sched_domain   Santosh Shilimkar
• [RFC 2/6] sched: add a new SD SHARE_POWERLINE flag for sched_domain   Vincent Guittot
• [RFC 2/6] sched: add a new SD SHARE_POWERLINE flag for sched_domain   Vincent Guittot
• [RFC 2/7] capebus: Add beaglebone board support   Tony Lindgren
• [RFC 2/7] capebus: Add beaglebone board support   Tony Lindgren
• [RFC 2/7] capebus: Add beaglebone board support   Pantelis Antoniou
• [RFC 2/7] capebus: Add beaglebone board support   Tony Lindgren
• [RFC 2/7] capebus: Add beaglebone board support   Pantelis Antoniou
• [RFC 20/24] SERIAL: core: add xmit buffer allocation callbacks   Russell King
• [RFC 20/24] SERIAL: core: add xmit buffer allocation callbacks   Alan Cox
• [RFC 20/24] SERIAL: core: add xmit buffer allocation callbacks   Russell King - ARM Linux
• [RFC 21/24] SERIAL: omap: use tx buffer allocation API   Russell King
• [RFC 22/24] SERIAL: omap: typesafe conversion from uart_port to uart_omap_port   Russell King
• [RFC 23/24] SERIAL: omap: move driver private definitions and structures to driver   Russell King
• [RFC 24/24] SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR   Russell King
• [RFC 3/6] sched: pack small tasks   Vincent Guittot
• [RFC 3/6] sched: pack small tasks   Santosh Shilimkar
• [RFC 3/6] sched: pack small tasks   Vincent Guittot
• [RFC 3/7] capebus: Beaglebone generic cape support   Pantelis Antoniou
• [RFC 4/6] sched: secure access to other CPU statistics   Vincent Guittot
• [RFC 4/6] sched: secure access to other CPU statistics   Santosh Shilimkar
• [RFC 4/6] sched: secure access to other CPU statistics   Vincent Guittot
• [RFC 4/7] capebus: Beaglebone geiger cape support   Pantelis Antoniou
• [RFC 5/6] sched: pack the idle load balance   Vincent Guittot
• [RFC 5/6] sched: pack the idle load balance   Santosh Shilimkar
• [RFC 5/6] sched: pack the idle load balance   Vincent Guittot
• [RFC 5/7] capebus: Beaglebone capebus DT update   Pantelis Antoniou
• [RFC 6/6] ARM: sched: clear SD_SHARE_POWERLINE   Vincent Guittot
• [RFC 6/6] ARM: sched: clear SD_SHARE_POWERLINE   Santosh Shilimkar
• [RFC 6/6] ARM: sched: clear SD_SHARE_POWERLINE   Vincent Guittot
• [RFC 6/7] capebus: Document DT bindings   Pantelis Antoniou
• [RFC 7/7] capebus: Documentation; capebus-summary   Pantelis Antoniou
• [RFC][PATCH 0/5] Introduce .get_voltage callback into voltdm   Mike Turquette
• [RFC][PATCH 0/5] Introduce .get_voltage callback into voltdm   Kevin Hilman
• [RFC][PATCH 0/5] Introduce .get_voltage callback into voltdm   Mike Turquette
• [RFC][PATCH v4? 0/7] Adaptive Body-Bias for OMAP   Mike Turquette
• [RFC][PATCH v4? 0/7] Adaptive Body-Bias for OMAP   Nishanth Menon
• [RFC][PATCH v4? 0/7] Adaptive Body-Bias for OMAP   Mike Turquette
• [RFC][PATCH v4? 0/7] Adaptive Body-Bias for OMAP   Tony Lindgren
• [RFC][PATCH v4? 0/7] Adaptive Body-Bias for OMAP   Mike Turquette
• [RFC][PATCH v4? 0/7] Adaptive Body-Bias for OMAP   Kevin Hilman
• [RFC][PATCH v4? 0/7] Adaptive Body-Bias for OMAP   Tony Lindgren
• [RFC] arm/mm: add a protection when flushing anonymous pages   Andrew Yan-Pai Chen
• [RFC] arm/mm: add a protection when flushing anonymous pages   Andrew Yan-Pai Chen
• [RFC] arm/mm: add a protection when flushing anonymous pages   Russell King - ARM Linux
• [RFC] arm/mm: add a protection when flushing anonymous pages   Andrew Yan-Pai Chen
• [RFC] arm/mm: add a protection when flushing anonymous pages   Andrew Yan-Pai Chen
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Tero Kristo
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Kevin Hilman
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Paul Walmsley
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Tero Kristo
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Kevin Hilman
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Santosh Shilimkar
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Shubhrajyoti Datta
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Kevin Hilman
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Kevin Hilman
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Shubhrajyoti Datta
• [RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod   Paul Walmsley
• [RFC] ARM: sched_clock: update epoch_cyc on resume   Kevin Hilman
• [RFC] Common clock framework for external clock generators   Sebastian Hesselbarth
• [RFC] Common clock framework for external clock generators   Daniel Mack
• [RFC] Common clock framework for external clock generators   Sebastian Hesselbarth
• [RFC] cpufreq: Make sure target freq is within limits   Viresh Kumar
• [RFC] cpufreq: Make sure target freq is within limits   Rafael J. Wysocki
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Russell King - ARM Linux
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Russell King - ARM Linux
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Péter Ujfalusi
• [RFC] Energy/power monitoring within the kernel   Pawel Moll
• [RFC] Energy/power monitoring within the kernel   Steven Rostedt
• [RFC] Energy/power monitoring within the kernel   Andy Green
• [RFC] Energy/power monitoring within the kernel   Guenter Roeck
• [RFC] Energy/power monitoring within the kernel   Thomas Renninger
• [RFC] Energy/power monitoring within the kernel   Thomas Renninger
• [RFC] Energy/power monitoring within the kernel   Pawel Moll
• [RFC] Energy/power monitoring within the kernel   Pawel Moll
• [RFC] Energy/power monitoring within the kernel   Pawel Moll
• [RFC] Energy/power monitoring within the kernel   Pawel Moll
• [RFC] Energy/power monitoring within the kernel   Guenter Roeck
• [RFC] Get early_printk() to work on socfpga board   Pavel Machek
• [RFC] Get early_printk() to work on socfpga board   Jamie Iles
• [RFC] media: mx3: Add support for missing video formats   Benoît Thébaudeau
• [RFC] media: mx3: Add support for missing video formats   Laurent Pinchart
• [RFC] regulator: core: Support for continuous voltage range   Mark Brown
• [RFC] Samsung SoC camera DT bindings   Sylwester Nawrocki
• [RFC] Using CMA with devicetree generated devices   Laura Abbott
• [RFC] Using CMA with devicetree generated devices   Marek Szyprowski
• [RFC PATCH 0/2] ARM: OMAP4+: Clk registration update   Grygorii Strashko
• [RFC PATCH 0/2] sched: Load Balancing using Per-entity-Load-tracking   preeti
• [RFC PATCH 0/2] sched: Load Balancing using Per-entity-Load-tracking   preeti
• [RFC PATCH 0/2] sched: Load Balancing using Per-entity-Load-tracking   preeti
• [RFC PATCH 0/2] Update ehci-platform driver to support devicetree   Tony Prisk
• [RFC PATCH 0/2] Update ehci-platform driver to support devicetree   Alan Stern
• [RFC PATCH 0/4] ARM: multi-cluster aware boot protocol   Lorenzo Pieralisi
• [RFC PATCH 0/6] ARM: mm: HugeTLB + THP support.   Steve Capper
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Preeti U Murthy
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Preeti Murthy
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Peter Zijlstra
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Preeti U Murthy
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Preeti U Murthy
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Peter Zijlstra
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Ingo Molnar
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Preeti U Murthy
• [RFC PATCH 00/13] sched: Integrating Per-entity-load-tracking with the core scheduler   Preeti U Murthy
• [RFC PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements   Linus Walleij
• [RFC PATCH 01/13] sched:Prevent movement of short running tasks during load balancing   Preeti U Murthy
• [RFC PATCH 02/13] sched:Pick the apt busy sched group during load balancing   Preeti U Murthy
• [RFC PATCH 03/13] ARM: edma: add DT and runtime PM support for AM335x   Matt Porter
• [RFC PATCH 03/13] sched:Decide whether there be transfer of loads based on the PJT's metric   Preeti U Murthy
• [RFC PATCH 04/13] sched:Decide group_imb using PJT's metric   Preeti U Murthy
• [RFC PATCH 05/13] sched:Calculate imbalance using PJT's metric   Preeti U Murthy
• [RFC PATCH 06/13] sched: Changing find_busiest_queue to use PJT's metric   Preeti U Murthy
• [RFC PATCH 07/13] sched: Change move_tasks to use PJT's metric   Preeti U Murthy
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Matt Porter
• [RFC PATCH 08/13] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Vinod Koul
• [RFC PATCH 08/13] sched: Some miscallaneous changes in load_balance   Preeti U Murthy
• [RFC PATCH 09/13] sched: Modify check_asym_packing to use PJT's metric   Preeti U Murthy
• [RFC PATCH 1/2] ARM: OMAP2+: clock: Add omap2_clks_register API   Grygorii Strashko
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Uwe Kleine-König
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Will Deacon
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Uwe Kleine-König
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Will Deacon
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Uwe Kleine-König
• [RFC PATCH 1/3] amba-clcd: Add Device Tree support to amba-clcd driver   Jon Medhurst (Tixy)
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Rob Herring
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [RFC PATCH 1/6] ARM: mm: correct pte_same behaviour for LPAE.   Steve Capper
• [RFC PATCH 10/13] sched: Modify fix_small_imbalance to use PJT's metric   Preeti U Murthy
• [RFC PATCH 10/13] spi: omap2-mcspi: dma_request_slave_channel() support for DT platforms   Matt Porter
• [RFC PATCH 11/13] sched: Modify find_idlest_group to use PJT's metric   Preeti U Murthy
• [RFC PATCH 12/13] sched: Modify find_idlest_cpu to use PJT's metric   Preeti U Murthy
• [RFC PATCH 13/13] sched: Modifying wake_affine to use PJT's metric   Preeti U Murthy
• [RFC PATCH 16/16] Documentation: Update samsung-pinctrl device tree bindings documentation   Stephen Warren
• [RFC PATCH 2/2] ARM: OMAP4: clock: use omap4_clks_register API   Grygorii Strashko
• [RFC PATCH 2/2] ARM: OMAP4: clock: use omap4_clks_register API   Mike Turquette
• [RFC PATCH 2/2] ARM: OMAP4: clock: use omap4_clks_register API   Strashko, Grygorii
• [RFC PATCH 2/2] ARM: OMAP4: clock: use omap4_clks_register API   Mike Turquette
• [RFC PATCH 2/4] ARM: kernel: add cpu logical map DT init in setup_arch   Lorenzo Pieralisi
• [RFC PATCH 2/6] ARM: mm: Add support for flushing HugeTLB pages.   Steve Capper
• [RFC PATCH 3/4] ARM: kernel: add logical mappings look-up   Lorenzo Pieralisi
• [RFC PATCH 3/6] ARM: mm: HugeTLB support for LPAE systems.   Steve Capper
• [RFC PATCH 4/4] ARM: gic: use a private mapping for CPU target interfaces   Lorenzo Pieralisi
• [RFC PATCH 4/6] ARM: mm: HugeTLB support for non-LPAE systems.   Steve Capper
• [RFC PATCH 5/6] ARM: mm: Transparent huge page support for LPAE systems.   Steve Capper
• [RFC PATCH 6/6] ARM: mm: Transparent huge page support for non-LPAE systems.   Steve Capper
• [RFC PATCH] ARM: kernel: update cpuinfo to print all online CPUs features   Lorenzo Pieralisi
• [RFC PATCH] ARM: kernel: update cpuinfo to print all online CPUs features   Santosh Shilimkar
• [RFC PATCH] ARM: kernel: update cpuinfo to print all online CPUs features   Russell King - ARM Linux
• [RFC PATCH] ARM: kernel: update cpuinfo to print all online CPUs features   Lorenzo Pieralisi
• [RFC PATCH] ARM: SMP: consolidate holding pen   Marc Zyngier
• [RFC PATCH] ARM: SMP: consolidate holding pen   Nicolas Pitre
• [RFC PATCH] ARM: SMP: consolidate holding pen   Pawel Moll
• [RFC PATCH] ARM: SMP: consolidate holding pen   Russell King - ARM Linux
• [RFC PATCH] ARM: vt8500: Convert arch-vt8500 to multiplatform   Tony Prisk
• [RFC PATCH] ARM: vt8500: Convert arch-vt8500 to multiplatform   Alexey Charkov
• [RFC PATCH] ARM: vt8500: Convert arch-vt8500 to multiplatform   Arnd Bergmann
• [RFC PATCH] ARM: vt8500: Convert arch-vt8500 to multiplatform   Tony Prisk
• [RFC PATCH] ARM: vt8500: Convert arch-vt8500 to multiplatform   Arnd Bergmann
• [RFC PATCH] ARM: vt8500: Convert arch-vt8500 to multiplatform   linux at prisktech.co.nz
• [RFC PATCH] ARM: vt8500: Convert arch-vt8500 to multiplatform   Arnd Bergmann
• [RFC PATCH] ARM: vt8500: Convert arch-vt8500 to multiplatform   Tony Prisk
• [RFC PATCH] arm: vt8500: Convert irq.c for multiplatform integration   Tony Prisk
• [RFC PATCH] arm: vt8500: Convert irq.c for multiplatform integration   Arnd Bergmann
• [RFC PATCH] arm: vt8500: Convert irq.c for multiplatform integration   Tony Prisk
• [RFC PATCH] arm: vt8500: Convert irq.c for multiplatform integration   Tony Prisk
• [RFC PATCH] arm: vt8500: Convert irq.c for multiplatform integration   Arnd Bergmann
• [RFC PATCH] dt: describe base reset signal binding   Stephen Warren
• [RFC PATCH] dt: describe base reset signal binding   Mike Turquette
• [RFC PATCH] dt: describe base reset signal binding   Stephen Warren
• [RFC PATCH] dt: describe base reset signal binding   Mike Turquette
• [RFC PATCH] dt: describe base reset signal binding   Stephen Warren
• [RFC PATCH v2 0/2] watchdog: core: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [RFC PATCH v2 00/16] DMA Engine support for AM33xx   Matt Porter
• [RFC PATCH v2 00/16] DMA Engine support for AM33xx   Grant Likely
• [RFC PATCH v2 00/16] DMA Engine support for AM33xx   Matt Porter
• [RFC PATCH v2 01/16] dmaengine: edma: fix slave config dependency on direction   Matt Porter
• [RFC PATCH v2 02/16] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [RFC PATCH v2 03/16] ARM: edma: remove unused transfer controller handlers   Matt Porter
• [RFC PATCH v2 04/16] ARM: edma: add DT and runtime PM support for AM335x   Matt Porter
• [RFC PATCH v2 05/16] dmaengine: edma: enable build for AM33XX   Matt Porter
• [RFC PATCH v2 06/16] dmaengine: edma: Add TI EDMA device tree binding   Matt Porter
• [RFC PATCH v2 07/16] ARM: dts: add AM33XX EDMA support   Matt Porter
• [RFC PATCH v2 08/16] ARM: omap: add hsmmc am33xx specific init   Matt Porter
• [RFC PATCH v2 08/16] ARM: omap: add hsmmc am33xx specific init   Hebbar, Gururaja
• [RFC PATCH v2 08/16] ARM: omap: add hsmmc am33xx specific init   Matt Porter
• [RFC PATCH v2 09/16] dmaengine: add dma_request_slave_channel_compat()   Matt Porter
• [RFC PATCH v2 1/2] watchdog: core: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [RFC PATCH v2 10/16] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()   Matt Porter
• [RFC PATCH v2 11/16] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Matt Porter
• [RFC PATCH v2 12/16] mmc: omap_hsmmc: add generic DMA request support to the DT binding   Matt Porter
• [RFC PATCH v2 13/16] ARM: dts: add AM33XX MMC support   Matt Porter
• [RFC PATCH v2 14/16] spi: omap2-mcspi: convert to dma_request_slave_channel_compat()   Matt Porter
• [RFC PATCH v2 15/16] spi: omap2-mcspi: add generic DMA request support to the DT binding   Matt Porter
• [RFC PATCH v2 16/16] ARM: dts: add AM33XX SPI support   Matt Porter
• [RFC PATCH v2 2/2] watchdog: add timeout-sec property binding to some drivers   Fabio Porcedda
• [RFC PATCHv2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Tony Prisk
• [RFC PATCHv2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Olof Johansson
• [RFC PATCHv2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Arnd Bergmann
• [RFC PATCHv2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Olof Johansson
• [RFC PATCHv2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Tony Prisk
• [RFC PATCHv2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Olof Johansson
• [RFC PATCHv2] ARM: vt8500: Convert arch-vt8500 to multiplatform   Tony Prisk
• [RFC PATCH v2] ARM hardcoded instruction causes cpu-hotplug fail to work on big-endian platfrom   Fei Yang
• [RFC PATCH v2] Hardcoded instruction causes cpu-hotplug fail on be8 big-endian ARM platfrom   Fei Yang
• [RFC PATCH v2] prevent top pte being overwritten before flushing   Andrew Yan-Pai Chen
• [RFC PATCH v2] prevent top pte being overwritten before flushing   Andrew Yan-Pai Chen
• [RFC PATCH v2] prevent top pte being overwritten before flushing   Will Deacon
• [RFC PATCH v2] prevent top pte being overwritten before flushing   Jason Lin
• [RFC PATCH v2] prevent top pte being overwritten before flushing   Will Deacon
• [RFC PATCH v2] prevent top pte being overwritten before flushing   Andrew Yan-Pai Chen
• [RFC PATCH v3 0/4] watchdog: core: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [RFC PATCH v3 00/16] DMA Engine support for AM33XX   Matt Porter
• [RFC PATCH v3 00/16] DMA Engine support for AM33XX   Bedia, Vaibhav
• [RFC PATCH v3 00/16] DMA Engine support for AM33XX   Matt Porter
• [RFC PATCH v3 00/16] DMA Engine support for AM33XX   Bedia, Vaibhav
• [RFC PATCH v3 00/16] DMA Engine support for AM33XX   Matt Porter
• [RFC PATCH v3 00/16] DMA Engine support for AM33XX   Bedia, Vaibhav
• [RFC PATCH v3 00/16] DMA Engine support for AM33XX   Russ Dill
• [RFC PATCH v3 01/16] dmaengine: edma: fix slave config dependency on direction   Matt Porter
• [RFC PATCH v3 02/16] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [RFC PATCH v3 02/16] ARM: davinci: move private EDMA API to arm/common   Sekhar Nori
• [RFC PATCH v3 03/16] ARM: edma: remove unused transfer controller handlers   Matt Porter
• [RFC PATCH v3 04/16] ARM: edma: add DT and runtime PM support for AM33XX   Matt Porter
• [RFC PATCH v3 04/16] ARM: edma: add DT and runtime PM support for AM33XX   Sekhar Nori
• [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support   Matt Porter
• [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support   Hebbar, Gururaja
• [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support   Sekhar Nori
• [RFC PATCH v3 06/16] dmaengine: edma: enable build for AM33XX   Matt Porter
• [RFC PATCH v3 07/16] dmaengine: edma: Add TI EDMA device tree binding   Matt Porter
• [RFC PATCH v3 08/16] ARM: dts: add AM33XX EDMA support   Matt Porter
• [RFC PATCH v3 08/16] ARM: dts: add AM33XX EDMA support   Sekhar Nori
• [RFC PATCH v3 09/16] dmaengine: add dma_request_slave_channel_compat()   Matt Porter
• [RFC PATCH v3 1/4] watchdog: core: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [RFC PATCH v3 1/4] watchdog: core: dt: add support for the timeout-sec dt property   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v3 1/4] watchdog: core: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [RFC PATCH v3 10/16] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()   Matt Porter
• [RFC PATCH v3 11/16] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Matt Porter
• [RFC PATCH v3 11/16] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC   Sekhar Nori
• [RFC PATCH v3 12/16] mmc: omap_hsmmc: add generic DMA request support to the DT binding   Matt Porter
• [RFC PATCH v3 13/16] ARM: dts: add AM33XX MMC support   Matt Porter
• [RFC PATCH v3 13/16] ARM: dts: add AM33XX MMC support   AnilKumar, Chimata
• [RFC PATCH v3 14/16] spi: omap2-mcspi: convert to dma_request_slave_channel_compat()   Matt Porter
• [RFC PATCH v3 15/16] spi: omap2-mcspi: add generic DMA request support to the DT binding   Matt Porter
• [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support   Matt Porter
• [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support   Sekhar Nori
• [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support   Philip, Avinash
• [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support   Philip, Avinash
• [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support   Benoit Cousson
• [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support   Benoit Cousson
• [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support   Philip, Avinash
• [RFC PATCH v3 2/4] watchdog: add timeout-sec property binding to some drivers   Fabio Porcedda
• [RFC PATCH v3 3/4] watchdog: orion_wdt: litte cleanup   Fabio Porcedda
• [RFC PATCH v3 4/4] watchdog: WatchDog Timer Driver Core: fix comment   Fabio Porcedda
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Kevin Hilman
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Paul Walmsley
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Sourav
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Kevin Hilman
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Poddar, Sourav
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Kevin Hilman
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Russell King - ARM Linux
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Kevin Hilman
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Tony Lindgren
• [RFT/PATCH] serial: omap: prevent resume if device is not suspended.   Kevin Hilman
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Ian Campbell
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Arnd Bergmann
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Ian Campbell
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Arnd Bergmann
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Ian Campbell
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Ian Campbell
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Arnd Bergmann
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Stefano Stabellini
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Ian Campbell
• [Xen-devel] [PATCH 5/9] ARM: Xen: fix initial build problems:   Stefano Stabellini
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   Michael Hope
• alignment faults in 3.6   Mans Rullgard
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   Mans Rullgard
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   Khem Raj
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Mans Rullgard
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Mans Rullgard
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Mans Rullgard
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   Mikael Pettersson
• alignment faults in 3.6   Mikael Pettersson
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   Mans Rullgard
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Nicolas Pitre
• alignment faults in 3.6   Mikael Pettersson
• alignment faults in 3.6   Mans Rullgard
• alignment faults in 3.6   Nicolas Pitre
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Scott Bambrough
• alignment faults in 3.6   Mans Rullgard
• alignment faults in 3.6   Jon Masters
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Jon Masters
• alignment faults in 3.6   David Laight
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   David Laight
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Maxime Bizon
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Maxime Bizon
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Arnd Bergmann
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Maxime Bizon
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Arnd Bergmann
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Rob Herring
• alignment faults in 3.6   David Laight
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Catalin Marinas
• alignment faults in 3.6   Arnd Bergmann
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Måns Rullgård
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Benjamin LaHaise
• alignment faults in 3.6   David Laight
• alignment faults in 3.6   Eric Dumazet
• alignment faults in 3.6   Benjamin LaHaise
• alignment faults in 3.6   Ben Hutchings
• alignment faults in 3.6   David Laight
• alignment faults in 3.6   Ben Hutchings
• alignment faults in 3.6   Jon Masters
• alignment faults in 3.6   Russell King - ARM Linux
• alignment faults in 3.6   Jon Masters
• alignment faults in 3.6   Rob Herring
• AM33XX suspend-resume support (Was RE: pm: add suspend_mem and suspend_standby support)   Bedia, Vaibhav
• arm-soc maintainer entry   Stephen Boyd
• arm-soc maintainer entry   Olof Johansson
• arm-soc maintainer entry   Stephen Boyd
• arm-soc maintainer entry   Olof Johansson
• arm-soc tree was Re: [PATCH] Fix socfpga compilation with early_printk() enabled   Pavel Machek
• arm-soc tree was Re: [PATCH] Fix socfpga compilation with early_printk() enabled   Pavel Machek
• arm-soc tree was Re: [PATCH] Fix socfpga compilation with early_printk() enabled   Arnd Bergmann
• arm-soc tree was Re: [PATCH] Fix socfpga compilation with early_printk() enabled   Arnd Bergmann
• arm-soc tree was Re: [PATCH] Fix socfpga compilation with early_printk() enabled   Pawel Moll
• ARM: Add PI/robust mutexes support for SMP kernels   ashish yadav
• ARM: Add PI/robust mutexes support for SMP kernels   ashish yadav
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Valentin Pistol
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Will Deacon
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Dietmar Eggemann
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Valentin Pistol
• ARM: hw_breakpoint: silent EPERM when setting ARM_DSCR_MDBGEN on ARM_DEBUG_ARCH_V7_ECP14   Valentin Pistol
• ARM: OMAP: fix new sparse warnings   Paul Walmsley
• ARM_ATAG_DTB_COMPAT fails on fdt_ro.c compiling   Shawn Guo
• ARM_ATAG_DTB_COMPAT fails on fdt_ro.c compiling   Nicolas Pitre
• ARM_ATAG_DTB_COMPAT fails on fdt_ro.c compiling   Shawn Guo
• ARM_ATAG_DTB_COMPAT fails on fdt_ro.c compiling   Stephen Warren
• ARM_ATAG_DTB_COMPAT fails on fdt_ro.c compiling   Fabio Estevam
• ARM_ATAG_DTB_COMPAT fails on fdt_ro.c compiling   Shawn Guo
• ARM_ATAG_DTB_COMPAT fails on fdt_ro.c compiling   Stephen Warren
• Booting vanilla kernel on the beaglebone   Vaibhav Hiremath
• Booting vanilla kernel on the beaglebone   Vaibhav Hiremath
• Booting vanilla kernel on the beaglebone   Richard Cochran
• Booting vanilla kernel on the beaglebone   Richard Cochran
• Booting vanilla kernel on the beaglebone   Hiremath, Vaibhav
• Booting vanilla kernel on the beaglebone   Richard Cochran
• Booting vanilla kernel on the beaglebone   Hiremath, Vaibhav
• Booting vanilla kernel on the beaglebone   Richard Cochran
• Booting vanilla kernel on the beaglebone   Hiremath, Vaibhav
• Booting vanilla kernel on the beaglebone   N, Mugunthan V
• Booting vanilla kernel on the beaglebone   Richard Cochran
• Booting vanilla kernel on the beaglebone   Richard Cochran
• Booting vanilla kernel on the beaglebone   Hiremath, Vaibhav
• Booting vanilla kernel on the beaglebone   Richard Cochran
• Booting vanilla kernel on the beaglebone   Hiremath, Vaibhav
• Booting vanilla kernel on the beaglebone   Richard Cochran
• Booting vanilla kernel on the beaglebone   N, Mugunthan V
• Booting vanilla kernel on the beaglebone   Richard Cochran
• bug with 3.4.6, 3.5.3, 3.6.1   Gilles Chanteperdrix
• bug with 3.4.6, 3.5.3, 3.6.1   Will Deacon
• bug with 3.4.6, 3.5.3, 3.6.1   Gilles Chanteperdrix
• bug with 3.4.6, 3.5.3, 3.6.1   Gilles Chanteperdrix
• bug with 3.4.6, 3.5.3, 3.6.1   Will Deacon
• bug with 3.4.6, 3.5.3, 3.6.1   Gilles Chanteperdrix
• bug with 3.4.6, 3.5.3, 3.6.1   Will Deacon
• bug with 3.4.6, 3.5.3, 3.6.1   Will Deacon
• bug with 3.4.6, 3.5.3, 3.6.1   Gilles Chanteperdrix
• Build broken on linus/master?   Bedia, Vaibhav
• Build broken on linus/master?   Santosh Shilimkar
• Build broken on linus/master?   Bedia, Vaibhav
• Build broken on linus/master?   Santosh Shilimkar
• Changing sd card data bits on the clock falling edge   Marco Lazzaroni
• DEBUG_LL broken for socfpga   Thomas Petazzoni
• DEBUG_LL broken for socfpga   Thomas Petazzoni
• DEBUG_LL broken for socfpga   Dinh Nguyen
• Deferring sdhci probe if regulators are not found   Pavan Kunapuli
• Devicetree/Interrupts problem   Tony Prisk
• discrepancy while save and restore of debounce registers   Hebbar, Gururaja
• discrepancy while save and restore of debounce registers   Jon Hunter
• discrepancy while save and restore of debounce registers   Hebbar, Gururaja
• discrepancy while save and restore of debounce registers   Jon Hunter
• dma_alloc_coherent fails in framebuffer   Tony Prisk
• dma_alloc_coherent fails in framebuffer   Tony Prisk
• dma_alloc_coherent fails in framebuffer   Tony Prisk
• dma_alloc_coherent fails in framebuffer   Tomasz Figa
• dma_alloc_coherent fails in framebuffer   Tony Prisk
• dma_alloc_coherent fails in framebuffer   Mel Gorman
• dma_alloc_coherent fails in framebuffer   Marek Szyprowski
• dma_alloc_coherent fails in framebuffer   Tony Prisk
• dma_alloc_coherent fails in framebuffer   Bob Liu
• dma_alloc_coherent fails in framebuffer   Tony Prisk
• dma_alloc_coherent fails in framebuffer   Tony Prisk
• dma_alloc_coherent fails in framebuffer   Mel Gorman
• dma_alloc_coherent fails in framebuffer   Tony Prisk
• dma_alloc_coherent fails in framebuffer   James Bottomley
• dma_alloc_coherent fails in framebuffer   Bob Liu
• Do we need to fix below dump during cpu hot plug operation?   Peter Chen
• Do we need to fix below dump during cpu hot plug operation?   Shawn Guo
• Do we need to fix below dump during cpu hot plug operation?   Linus Walleij
• Do we need to fix below dump during cpu hot plug operation?   Russell King - ARM Linux
• Do we need to fix below dump during cpu hot plug operation?   Linus Walleij
• dts: question about how to configure PIO used as i2c irq   Bo Shen
• dts: question about how to configure PIO used as i2c irq   Jean-Christophe PLAGNIOL-VILLARD
• dts: question about how to configure PIO used as i2c irq   Nicolas Ferre
• dts: question about how to configure PIO used as i2c irq   Bo Shen
• ERRATA_751472 was Re: [PATCHv2] arm:socfpga: Enable SMP for socfpga   Pavel Machek
• ERROR: "read_current_timer" [fs/ext4/ext4.ko] undefined   Kukjin Kim
• ERROR: "read_current_timer" [fs/ext4/ext4.ko] undefined   Marc Zyngier
• ERROR: "read_current_timer" [fs/ext4/ext4.ko] undefined   Will Deacon
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Paul Walmsley
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Tony Lindgren
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Paul Walmsley
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Paul Walmsley
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Paul Walmsley
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Vaibhav Hiremath
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Vaibhav Hiremath
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Paul Walmsley
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Tony Lindgren
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Matt Porter
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Hiremath, Vaibhav
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Hiremath, Vaibhav
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Hiremath, Vaibhav
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Tony Lindgren
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Hiremath, Vaibhav
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Paul Walmsley
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Hiremath, Vaibhav
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Richard Cochran
• Fwd: [PATCH 2/5] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio   Hiremath, Vaibhav
• Fwd: [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX   Richard Cochran
• hai   kristian
• How many cores does the ARM branch support?   Michelle Konzack
• How many cores does the ARM branch support?   Gregory CLEMENT
• How many cores does the ARM branch support?   Jean-Christophe PLAGNIOL-VILLARD
• How many cores does the ARM branch support?   Arnd Bergmann
• i.MX28 die temperature   Peter Turczak
• i.MX28 die temperature   Marek Vasut
• i.MX28 die temperature   Peter Turczak
• i.MX28 die temperature   Marek Vasut
• imx-sdma.c broken on imx53 for sound   Rick Bronson
• imx-sdma.c broken on imx53 for sound   Fabio Estevam
• imx-sdma.c broken on imx53 for sound   Fabio Estevam
• imx-sdma.c broken on imx53 for sound   Fabio Estevam
• imx53 pengutronix kernel   rick at efn.org
• imx6q: high interrupt latencies   Shawn Guo
• IMX breaking Versatile Express build   Russell King - ARM Linux
• IMX breaking Versatile Express build   Shawn Guo
• irq_set_chained_handler() called too early for hwirq to be initialized   Roland Stigge
• irq_set_chained_handler() called too early for hwirq to be initialized   Thomas Gleixner
• irq_set_chained_handler() called too early for hwirq to be initialized   Roland Stigge
• irq_set_chained_handler() called too early for hwirq to be initialized   Thomas Gleixner
• IRQ code inconsistencies across platforms   linux at prisktech.co.nz
• IS_ERR_OR_NULL - please STOP telling people to use this on a whim   Russell King - ARM Linux
• IS_ERR_OR_NULL - please STOP telling people to use this on a whim   Phil Carmody
• IS_ERR_OR_NULL - please STOP telling people to use this on a whim   Russell King - ARM Linux
• IS_ERR_OR_NULL - please STOP telling people to use this on a whim   Nicolas Ferre
• Is it too strict for VIPT cache flushing in flush_cache_[mm|range]?   Ning Jiang
• Kernel panic in mxs_auart_irq_handle with latest kernel?   Subodh Nijsure
• Kernel panic in mxs_auart_irq_handle with latest kernel?   Uwe Kleine-König
• Kernel panic in mxs_auart_irq_handle with latest kernel?   Russell King - ARM Linux
• Kernel panic in mxs_auart_irq_handle with latest kernel?   Uwe Kleine-König
• Kernel panic in mxs_auart_irq_handle with latest kernel?   Subodh Nijsure
• linux-next: manual merge of the arm-soc tree with Linus' tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm64 tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the gpio-lw tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the modules tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the pinctrl tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the spi-mb tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the spi-mb tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the staging tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the staging tree   Greg KH
• linux-next: manual merge of the arm-soc tree with the staging tree   Tony Lindgren
• linux-next: manual merge of the clk tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the clk tree with the arm-soc tree   Mike Turquette
• linux-next: manual merge of the clk tree with the arm-soc tree   Pawel Moll
• linux-next: manual merge of the signal tree with the modules and arm-soc trees   Stephen Rothwell
• linux-next: manual merge of the signal tree with the modules and arm-soc trees   Arnd Bergmann
• mail lost due to a hard-drive crash   Guennadi Liakhovetski
• make dtbs in linus/master   Stefano Stabellini
• make dtbs in linus/master   Olof Johansson
• Mismatched aliases with DMA mappings?   Marek Szyprowski
• Mismatched aliases with DMA mappings?   Dave Martin
• multi_v5_defconfig problem   Tony Prisk
• multi_v5_defconfig problem   Tony Prisk
• Multiplatform Kconfig options   Tony Prisk
• Multiplatform Kconfig options   Arnd Bergmann
• mxc-nand + jffs2 : dir ino #9041 appears to be a hard link   Gaëtan Carlier
• new branch for linux-next [Was: [PATCH v6 0/3] Updated Cortex-M3 series]   Uwe Kleine-König
• new branch for linux-next [Was: [PATCH v6 0/3] Updated Cortex-M3 series]   Russell King - ARM Linux
• new branch for linux-next [Was: [PATCH v6 0/3] Updated Cortex-M3 series]   Stephen Rothwell
• new branch for linux-next [Was: [PATCH v6 0/3] Updated Cortex-M3 series]   Stephen Rothwell
• No subject   Alexey Dobriyan
• OMAP4 clock/pm fixes [was: [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Archit Taneja
• OMAP4 clock/pm fixes [was: [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Benoit Cousson
• OMAP4 clock/pm fixes [was: [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Archit Taneja
• OMAP4 clock/pm fixes [was: [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• OMAP4 clock/pm fixes [was: [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Archit Taneja
• OMAP4 clock/pm fixes [was: [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• OMAP4 clock/pm fixes [was: [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Archit Taneja
• OMAP4 clock/pm fixes [was: [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Benoit Cousson
• OMAP baseline test results for v3.6   Paul Walmsley
• OMAP baseline test results for v3.6   Paul Walmsley
• OMAP baseline test results for v3.6-rc7   Paul Walmsley
• OMAP baseline test results for v3.6-rc7   Paul Walmsley
• OMAP baseline test results for v3.6-rc7   Igor Grinberg
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Tero Kristo
• OMAP baseline test results for v3.7-rc1   Santosh Shilimkar
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Felipe Balbi
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Felipe Balbi
• OMAP baseline test results for v3.7-rc1   Felipe Balbi
• OMAP baseline test results for v3.7-rc1   Aaro Koskinen
• OMAP baseline test results for v3.7-rc1   Aaro Koskinen
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Richard Cochran
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Richard Cochran
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Richard Cochran
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Richard Cochran
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Richard Cochran
• OMAP baseline test results for v3.7-rc1   Mohammed, Afzal
• OMAP baseline test results for v3.7-rc1   Richard Cochran
• OMAP baseline test results for v3.7-rc1   Matt Porter
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Tero Kristo
• OMAP baseline test results for v3.7-rc1   Kevin Hilman
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Kevin Hilman
• OMAP baseline test results for v3.7-rc1   Kevin Hilman
• OMAP baseline test results for v3.7-rc1   Kevin Hilman
• OMAP baseline test results for v3.7-rc1   Kevin Hilman
• OMAP baseline test results for v3.7-rc1   Kevin Hilman
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Felipe Balbi
• OMAP baseline test results for v3.7-rc1   Felipe Balbi
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Felipe Balbi
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Felipe Balbi
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Felipe Balbi
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Rafael J. Wysocki
• OMAP baseline test results for v3.7-rc1   Kevin Hilman
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Jon Hunter
• OMAP baseline test results for v3.7-rc2   Jon Hunter
• OMAP baseline test results for v3.7-rc2   Tony Lindgren
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Jon Hunter
• OMAP baseline test results for v3.7-rc2   Jon Hunter
• OMAP baseline test results for v3.7-rc2   Kevin Hilman
• OMAP baseline test results for v3.7-rc2   Matt Porter
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Matt Porter
• OMAP baseline test results for v3.7-rc2   Matt Porter
• OMAP baseline test results for v3.7-rc2   Kevin Hilman
• OMAP baseline test results for v3.7-rc2   Paul Walmsley
• OMAP baseline test results for v3.7-rc2   Kevin Hilman
• OMAP baseline test results for v3.7-rc2   Matt Porter
• OMAP baseline test results for v3.7-rc2   Igor Grinberg
• OMAP baseline test results for v3.7-rc2   Kevin Hilman
• OMAP baseline test results for v3.7-rc3   Paul Walmsley
• OMAP baseline test results for v3.7-rc3   Vaibhav Hiremath
• OMAP baseline test results for v3.7-rc3   Mark Jackson
• OMAP baseline test results for v3.7-rc3   Paul Walmsley
• OMAP baseline test results for v3.7-rc3   Hiremath, Vaibhav
• OMAP baseline test results for v3.7-rc3   Paul Walmsley
• OMAP baseline test results for v3.7-rc3   Vaibhav Hiremath
• OMAP baseline test results for v3.7-rc3   Tony Lindgren
• OMAP baseline test results for v3.7-rc3   Felipe Balbi
• OMAP baseline test results for v3.7-rc3   Tony Lindgren
• OMAP baseline test results for v3.7-rc3   Felipe Balbi
• OMAP baseline test results for v3.7-rc3   Mark Jackson
• OMAP baseline test results for v3.7-rc3   Hiremath, Vaibhav
• OMAP baseline test results for v3.7-rc3   Mark Jackson
• OMP35xx booting issue   Paul Walmsley
• OMP35xx booting issue   Felipe Balbi
• PDF documentation   Constantine Shulyupin
• PDF documentation   Peter Stuge
• PDF documentation   Mikael Pettersson
• PDF documentation   Constantine Shulyupin
• PDF documentation   Peter Stuge
• PDF documentation   Constantine Shulyupin
• PDF documentation   Russell King - ARM Linux
• PDF documentation   Peter Stuge
• PDF documentation   Russell King - ARM Linux
• PDF documentation   Peter Stuge
• PDF documentation   Alexander Holler
• PDF documentation   Jon Loeliger
• PDF documentation   Grant Edwards
• Please add bcm2835 tree to linux-next   Stephen Rothwell
• pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• pm: add suspend_mem and suspend_standby support   Greg Kroah-Hartman
• pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• pm: add suspend_mem and suspend_standby support   Greg Kroah-Hartman
• pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• pm: add suspend_mem and suspend_standby support   Alan Stern
• pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• pm: add suspend_mem and suspend_standby support   Vaibhav Hiremath
• pm: add suspend_mem and suspend_standby support   Daniel Mack
• pm: add suspend_mem and suspend_standby support   Hiremath, Vaibhav
• pm: add suspend_mem and suspend_standby support   Daniel Mack
• pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• pm: add suspend_mem and suspend_standby support   Jean-Christophe PLAGNIOL-VILLARD
• pm: add suspend_mem and suspend_standby support   Rafael J. Wysocki
• pm: add suspend_mem and suspend_standby support   Daniel Mack
• Possible regression in arm/io.h   Bastian Hecht
• Possible regression in arm/io.h   Will Deacon
• Possible regression in arm/io.h   Bastian Hecht
• Possible regression in arm/io.h   Will Deacon
• Possible regression in arm/io.h   Bastian Hecht
• Possible regression in arm/io.h   Will Deacon
• Possible regression in arm/io.h   Bastian Hecht
• Possible regression in arm/io.h   Will Deacon
• Possible regression in arm/io.h   Artem Bityutskiy
• Possible regression in arm/io.h   Will Deacon
• Possible regression in arm/io.h   Mikael Pettersson
• Problem with 64-bit registers on i.MX53   Michael Olbrich
• Problem with 64-bit registers on i.MX53   Russell King - ARM Linux
• Problem with 64-bit registers on i.MX53   Russell King - ARM Linux
• Problem with 64-bit registers on i.MX53   Dave Martin
• Problem with 64-bit registers on i.MX53   Russell King - ARM Linux
• Problem with 64-bit registers on i.MX53   Dave Martin
• Problem with 64-bit registers on i.MX53   Michael Olbrich
• Problem with 64-bit registers on i.MX53   Michael Olbrich
• Problem with 64-bit registers on i.MX53   Uwe Kleine-König
• Problem with 64-bit registers on i.MX53   Dave Martin
• problem with kernel build   Johannes Reif
• Problem with mmc DMA on panda board in 3.6   Tim Bird
• Problem with mmc DMA on panda board in 3.6   Robert Nelson
• Problem with mmc DMA on panda board in 3.6   Tim Bird
• Pull request for mainline   Roland Stigge
• pwm pin stays on 1 on mxs after pwm_config(pwm, 0, period); pwm_disable(pwm);   Uwe Kleine-König
• pxa:spitz_pm.c: commit b6eede11 breaks spitz resume under certain conditions.   Marko Katić
• pxa:spitz_pm.c: commit b6eede11 breaks spitz resume under certain conditions.   Marko Katić
• pxa:spitz_pm.c: commit b6eede11 breaks spitz resume under certain conditions.   Eric Miao
• pxa:spitz_pm.c: commit b6eede11 breaks spitz resume under certain conditions.   Marko Katić
• pxa:spitz_pm.c: commit b6eede11 breaks spitz resume under certain conditions.   Eric Miao
• Question about move atmel audio part to DT support   Bo Shen
• Question about move atmel audio part to DT support   Mark Brown
• Question about move atmel audio part to DT support   Bo Shen
• rcu self-detected stall messages on OMAP3, 4 boards   Linus Walleij
• rcu self-detected stall messages on OMAP3, 4 boards   Paul E. McKenney
• redirecting console output to display   Ellis Andrew
• redirecting console output to display   Russell King - ARM Linux
• Representation of external memory-mapped devices in DT (gpmc)   Daniel Mack
• Representation of external memory-mapped devices in DT (gpmc)   Rob Herring
• Representation of external memory-mapped devices in DT (gpmc)   Daniel Mack
• Representation of external memory-mapped devices in DT (gpmc)   Rob Herring
• Representation of external memory-mapped devices in DT (gpmc)   Daniel Mack
• Representation of external memory-mapped devices in DT (gpmc)   Afzal Mohammed
• Representation of external memory-mapped devices in DT (gpmc)   Daniel Mack
• Representation of external memory-mapped devices in DT (gpmc)   Rob Herring
• Retry writes on MMC/SD   Marco Lazzaroni
• RFC: tolerate junk after valid initramfs   Ben Peddell
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Kevin Hilman
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Felipe Balbi
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Felipe Balbi
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Kevin Hilman
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Felipe Balbi
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Peter Zijlstra
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Felipe Balbi
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Kevin Hilman
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Kevin Hilman
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Peter Zijlstra
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Kevin Hilman
• RT throttling and suspend/resume (was Re: [PATCH] i2c: omap: revert "i2c: omap: switch to threaded IRQ support")   Russell King - ARM Linux
• SD Card: how to change data bits on the clock falling edge?   Marco Lazzaroni
• Single zImage and A15/LPAE   Stephen Warren
• Single zImage and A15/LPAE   Nicolas Pitre
• Single zImage and A15/LPAE   Arnd Bergmann
• Single zImage and A15/LPAE   Dave Martin
• some question about armv7 cache operations   loody
• Testing i2c in 3.6.0-next-20121012 for i.mx233   Tim michals
• tidspbridge: ARM common zImage?   Omar Ramirez Luna
• Two questions about streaming DMA flushing   Li Haifeng
• Two questions about streaming DMA flushing   Catalin Marinas
• Two questions about streaming DMA flushing   Russell King - ARM Linux
• Two questions about streaming DMA flushing   Li Haifeng
• Two questions about streaming DMA flushing   Li Haifeng
• Two questions about streaming DMA flushing   Rajanikanth H.V
• Two questions about streaming DMA flushing   Catalin Marinas
• usb: uhci-platform driver fails after patch changes during merge   Tony Prisk
• usb: uhci-platform driver fails after patch changes during merge   Tony Prisk
• usb: uhci-platform driver fails after patch changes during merge   Tony Prisk
• usb: uhci-platform driver fails after patch changes during merge   Greg KH
• usb: uhci-platform driver fails after patch changes during merge   Tony Prisk
• usb: uhci-platform driver fails after patch changes during merge   Greg KH
• usb: uhci-platform driver fails after patch changes during merge   linux at prisktech.co.nz
• Use coupled cpuidle on imx6q   Shawn Guo
• Use coupled cpuidle on imx6q   Colin Cross
• vexpress issues in next-20121029   Stephen Warren
• vexpress issues in next-20121029   Pawel Moll
• When flush all dcache, why the increasing step is 2?   Li Haifeng
• When flush all dcache, why the increasing step is 2?   Catalin Marinas
• When flush all dcache, why the increasing step is 2?   Li Haifeng
• When will unwind_backtrace end?   Richard Zhao
• Which kirkwood does your DT board use?   Andrew Lunn
• Which kirkwood does your DT board use?   Jamie Lentin
• Which kirkwood does your DT board use?   Alexander Holler
• Which kirkwood does your DT board use?   Simon Baatz
• Which kirkwood does your DT board use?   Michael Walle
• Which kirkwood does your DT board use?   Josh Coombs
• Which kirkwood does your DT board use?   Andrew Lunn
• Which kirkwood does your DT board use?   Jason Cooper
• Which kirkwood does your DT board use?   Adam Baker
• Which kirkwood does your DT board use?   Andrew Lunn
• Доска бесплатных объявлений с Каталогом Организаций   trueboard.ru
• 答复: Hardcoded instruction causes certain features to fail on ARM platfrom due to endianness   Yangfei (Felix)