OMAP baseline test results for v3.7-rc2

[Paul Walmsley]

On Mon, 22 Oct 2012, Matt Porter wrote:

> I've mentioned this a few times in various threads...no need to use
> appended DTB on a current U-Boot. Some of us are indeed booting this way
> with the DTB properly passed separately from the bootloader and chosen
> filled out by the bootloader. And yes, am335x_evm_config applies to all
> AM33xx TI EVMs and the BeagleBone board. There's an EEPROM onboard all
> that is used to determine what board is present so a single
> MLO/u-boot.img can be used.

As Kevin mentioned earlier, this is unfortunately not true for those of us 
with earlier BeagleBoards:

   http://marc.info/?l=linux-omap&m=135094296931913&w=2

Do you know what the minimum board revision is that you all are 
supporting in U-boot?



- Paul