[RFT/PATCH] serial: omap: prevent resume if device is not suspended.
tony at atomide.com
Fri Oct 12 17:51:56 EDT 2012
* Kevin Hilman <khilman at deeprootsystems.com> [121012 13:34]:
> I'm not conviced (yet) that a mismatch is the root cause. Yes, that's
> what the author of $SUBJECT patch assumed and stated, but I'm not
> If it's an improperly configured mux issue, then the UART will break
> whenever the device is actually omap_device_enable'd, whether in the
> driver or in the bus layer.
I tried booting n800 here with CONFIG_OMAP_MUX disabled, and no
change. Serial console output stops right when the console initializes.
More information about the linux-arm-kernel