[RFC PATCH v3 13/16] ARM: dts: add AM33XX MMC support

AnilKumar, Chimata anilkumar at ti.com
Tue Oct 30 01:33:40 EDT 2012


On Thu, Oct 18, 2012 at 18:56:52, Porter, Matt wrote:
> Adds AM33XX MMC support for am335x-bone and am335x-evm.
> 
> Signed-off-by: Matt Porter <mporter at ti.com>
> ---
>  arch/arm/boot/dts/am335x-bone.dts |    6 ++++++
>  arch/arm/boot/dts/am335x-evm.dts  |    6 ++++++
>  arch/arm/boot/dts/am33xx.dtsi     |   27 +++++++++++++++++++++++++++
>  3 files changed, 39 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> index c634f87..5510979 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -70,6 +70,8 @@
>  		};
>  
>  		ldo3_reg: regulator at 5 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3300000>;

I think these min & max limits are regulator limits. Are these fields
required? Add details of these additions. AFAIK fine-tuned (board
specific) min/max limits should be add here(like mpu and core
regulator nodes)

>  			regulator-always-on;
>  		};
>  
> @@ -78,3 +80,7 @@
>  		};
>  	};
>  };
> +
> +&mmc1 {
> +	vmmc-supply = <&ldo3_reg>;
> +};
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 185d632..d63fce8 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -114,7 +114,13 @@
>  		};
>  
>  		vmmc_reg: regulator at 12 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3300000>;

=same=

>  			regulator-always-on;
>  		};
>  	};
>  };
> +
> +&mmc1 {
> +	vmmc-supply = <&vmmc_reg>;
> +};
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index ab9c78f..26a6af7 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -234,6 +234,33 @@
>  			status = "disabled";
>  		};
>  
> +		mmc1: mmc at 48060000 {
> +			compatible = "ti,omap3-hsmmc";
> +			ti,hwmods = "mmc1";
> +			ti,dual-volt;
> +			ti,needs-special-reset;
> +			dmas = <&edma 24
> +				&edma 25>;
> +			dma-names = "tx", "rx";

Add status = "disabled" here and "okay" in corresponding
.dts file

> +		};
> +
> +		mmc2: mmc at 481d8000 {
> +			compatible = "ti,omap3-hsmmc";
> +			ti,hwmods = "mmc2";
> +			ti,needs-special-reset;
> +			dmas = <&edma 2
> +				&edma 3>;
> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
> +		mmc3: mmc at 47810000 {
> +			compatible = "ti,omap3-hsmmc";
> +			ti,hwmods = "mmc3";
> +			ti,needs-special-reset;

What about DMA resources for mmc3?

AnilKumar

> +			status = "disabled";
> +		};
> +
>  		wdt2: wdt at 44e35000 {
>  			compatible = "ti,omap3-wdt";
>  			ti,hwmods = "wd_timer2";
> -- 
> 1.7.9.5
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
> 




More information about the linux-arm-kernel mailing list