[PATCH] ARM: OMAP3: Beagle: fix OPP customization and initcall ordering

[Kevin Hilman]

Kevin Hilman <khilman at deeprootsystems.com> writes:

> From: Kevin Hilman <khilman at ti.com>
>
> After commit 24d7b40a60cf19008334bcbcbd98da374d4d9c64 (ARM: OMAP2+:
> PM: MPU DVFS: use generic CPU device for MPU-SS), OPPs are registered
> using an existing CPU device, not the omap_device for MPU-SS.
>
> First, fix the board file to use get_cpu_device() as required by the
> above commit, otherwise custom OPPs will be added to the wrong device.
>
> Second, the board files OPP init is called from the its init_machine
> method, and the generic CPU devices are not yet created when
> init_machine is run.  Therefore OPP initialization will fail.  To fix,
> use a device_initcall() for the board file's OPP customization, and
> make the device_initcall board-specific by using a machine_is check.
>
> Reported-by: Paul Walmsley <paul at pwsan.com>
> Signed-off-by: Kevin Hilman <khilman at ti.com>
> ---
> v2: add machine_is* check to the device_initcall.
>
>  arch/arm/mach-omap2/board-omap3beagle.c | 20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index 388c431..60729bf 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -24,6 +24,7 @@
>  #include <linux/input.h>
>  #include <linux/gpio_keys.h>
>  #include <linux/opp.h>
> +#include <linux/cpu.h>
>  
>  #include <linux/mtd/mtd.h>
>  #include <linux/mtd/partitions.h>
> @@ -444,12 +445,16 @@ static struct omap_board_mux board_mux[] __initdata = {
>  };
>  #endif
>  
> -static void __init beagle_opp_init(void)
> +static int __init beagle_opp_init(void)
>  {
>  	int r = 0;
>  
> -	/* Initialize the omap3 opp table */
> -	if (omap3_opp_init()) {
> +	if (!machine_is_omap3_beagle())
> +		return 0;
> +
> +	/* Initialize the omap3 opp table if not already created. */
> +	r = omap3_opp_init();
> +	if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
>  		pr_err("%s: opp default init failed\n", __func__);
>  		return;

oops, sent wrong version.  The one queued locally has 'return r' here.

Kevin

>  	}
> @@ -458,13 +463,13 @@ static void __init beagle_opp_init(void)
>  	if (cpu_is_omap3630()) {
>  		struct device *mpu_dev, *iva_dev;
>  
> -		mpu_dev = omap_device_get_by_hwmod_name("mpu");
> +		mpu_dev = get_cpu_device(0);
>  		iva_dev = omap_device_get_by_hwmod_name("iva");
>  
>  		if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
>  			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
>  				__func__, mpu_dev, iva_dev);
> -			return;
> +			return -ENODEV;
>  		}
>  		/* Enable MPU 1GHz and lower opps */
>  		r = opp_enable(mpu_dev, 800000000);
> @@ -484,8 +489,9 @@ static void __init beagle_opp_init(void)
>  			opp_disable(iva_dev, 660000000);
>  		}
>  	}
> -	return;
> +	return 0;
>  }
> +device_initcall(beagle_opp_init);
>  
>  static void __init omap3_beagle_init(void)
>  {
> @@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void)
>  	/* Ensure SDRC pins are mux'd for self-refresh */
>  	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
>  	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
> -
> -	beagle_opp_init();
>  }
>  
>  MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")