[PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28

[Huang Shijie]

于 2012年10月25日 12:18, Vinod Koul 写道:
>
>> +
>> +static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size)
>> +{
>> +	struct dma_async_tx_descriptor *desc;
>> +	struct scatterlist *sgl =&s->tx_sgl;
>> +	struct dma_chan *channel = s->tx_dma_chan;
>> +	u32 pio;
>> +
>> +	/* [1] : send PIO. Note, the first pio word is CTRL1. */
>> +	pio = AUART_CTRL1_XFER_COUNT(size);
>> +	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)&pio,
>> +					1, DMA_TRANS_NONE, 0);
> this seems like a hack. API expects a scatterlist as argument.
> Same thing about direction, NONE doesnt mean anything for dma transfer.
It's not a hack. this DMA descriptor is used to set the registers.
Please see the code in drivers/dma/mxs-dma.c:mxs_dam_prep_slave_sg().


>> +	if (!desc) {
>> +		dev_err(s->dev, "step 1 error\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	/* [2] : set DMA buffer. */
>> +	sg_init_one(sgl, s->tx_dma_buf, size);
>> +	dma_map_sg(s->dev, sgl, 1, DMA_TO_DEVICE);
>> +	desc = dmaengine_prep_slave_sg(channel, sgl,
>> +			1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
>> +	if (!desc) {
>> +		dev_err(s->dev, "step 2 error\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	/* [3] : submit the DMA */
>> +	desc->callback = dma_tx_callback;
>> +	desc->callback_param = s;
>> +	dmaengine_submit(desc);
>> +	dma_async_issue_pending(channel);
>> +	return 0;
>> +}
>> +
>>
>> +static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param)
>> +{
>> +	struct mxs_auart_port *s = param;
>> +
>> +	if (!mxs_dma_is_apbx(chan))
>> +		return false;
>> +
>> +	if (s->dma_channel == chan->chan_id) {
>> +		chan->private =&s->dma_data;
> dont use chan->private. You need to dmaengine_slave_config API
please see the drivers/dma/mxs-dma.c:mxs_dam_alloc_chan_resoures().

The mxs-dma driver uses ->private to store the channel interrupt number.

thanks
Huang Shijie
>> +		return true;
>> +	}
>> +	return false;
>> +}
>> +