[PATCH 0/6] Adding support for SATA in EXYNO5

[vasanthananthan at gmail.com]

From: Vasanth Ananthan <vasanthananthan at gmail.com>

The following set of patches provides drivers for SATA
and SATA PHY controller and also an interface for the 
two entity to interact. 

Vasanth Ananthan (6):
  ARM: EXYNOS5: Clock settings for SATA and SATA PHY
  ARM: EXYNOS5: DT Support for SATA and SATA PHY
  DRIVERS: ATA: SATA PHY utility framework
  ARM: S3C2410: I2C driver polling mode support
  ARM: EYNOS5: SATA controller driver
  ARM: EXYNOS5: SATA PHY controller driver

 arch/arm/boot/dts/exynos5250-smdk5250.dts    |   11 +
 arch/arm/boot/dts/exynos5250.dtsi            |   20 ++
 arch/arm/mach-exynos/clock-exynos5.c         |   19 ++-
 arch/arm/mach-exynos/include/mach/map.h      |    7 +
 arch/arm/mach-exynos/include/mach/regs-pmu.h |    3 +
 arch/arm/mach-exynos/mach-exynos5-dt.c       |    6 +
 drivers/ata/Kconfig                          |    9 +
 drivers/ata/Makefile                         |    1 +
 drivers/ata/sata_exynos.c                    |  274 +++++++++++++++++++++++
 drivers/ata/sata_exynos_phy.c                |  303 ++++++++++++++++++++++++++
 drivers/ata/sata_phy.c                       |   99 +++++++++
 drivers/ata/sata_phy.h                       |   44 ++++
 drivers/i2c/busses/i2c-s3c2410.c             |   84 ++++++--
 13 files changed, 859 insertions(+), 21 deletions(-)
 create mode 100644 drivers/ata/sata_exynos.c
 create mode 100644 drivers/ata/sata_exynos_phy.c
 create mode 100644 drivers/ata/sata_phy.c
 create mode 100644 drivers/ata/sata_phy.h

-- 
1.7.5.4