[PATCH v3] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset

[Linus Walleij]

On Fri, Oct 26, 2012 at 12:52 AM, Jon Hunter <jon-hunter at ti.com> wrote:

> Subject: [PATCH] gpio/omap: fix clearing of debounce settings on gpio
>  free/reset
>
> When a GPIO is freed or shutdown, we need to ensure that any debounce settings
> are cleared and if the GPIO is the only GPIO in the bank that is currently
> using debounce, then disable the debounce clock as well to save power.
>
> Therefore, introduce a new function called _clear_gpio_debounce() to clear
> any debounce settings when the GPIO is freed or shutdown.
>
> Please note that we cannot use _gpio_dbck_disable() to disable the debounce
> clock because this has been specifically created for the gpio suspend path
> and is intended to shutdown the debounce clock while debounce is enabled.
>
> This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio,
> enabling debounce and then freeing the gpio and checking the register contents,
> the saved register context and the debounce clock state.
>
> Signed-off-by: Jon Hunter <jon-hunter at ti.com>

I have come to the conclusion that there is consensus to merge this
patch.

However it does *not* apply to my GPIO tree, which for the OMAP
driver is just a clean v3.7-rc1 and nothing else.

I previously reverted Kevin's patch, is this meant to be applied
on top of that one or what?

Jon, can you please submit a patch made against my GPIO
tree or linux-next or v3.7-rc2 or whatever and include the ACKs
you've recieved?

Thanks!
Linus Walleij