[PATCH 1/2] ARM: OMAP2+: Introduce local usb.h
Tony Lindgren
tony at atomide.com
Thu Oct 18 22:20:05 EDT 2012
Let's move what we can from plat/usb.h to the local usb.h
for ARM common zImage support.
This is needed so we can remove plat/usb.h for ARM common
zImage support.
Cc: Felipe Balbi <balbi at ti.com>
Cc: Samuel Ortiz <sameo at linux.intel.com>
Cc: Alan Stern <stern at rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Cc: Partha Basak <parthab at india.ti.com>
Cc: Keshava Munegowda <keshava_mgowda at ti.com>
Cc: linux-usb at vger.kernel.org
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap1/clock.c | 1
arch/arm/mach-omap2/board-2430sdp.c | 1
arch/arm/mach-omap2/board-3430sdp.c | 1
arch/arm/mach-omap2/board-3630sdp.c | 1
arch/arm/mach-omap2/board-4430sdp.c | 1
arch/arm/mach-omap2/board-am3517crane.c | 1
arch/arm/mach-omap2/board-am3517evm.c | 1
arch/arm/mach-omap2/board-cm-t35.c | 1
arch/arm/mach-omap2/board-cm-t3517.c | 1
arch/arm/mach-omap2/board-devkit8000.c | 1
arch/arm/mach-omap2/board-igep0020.c | 1
arch/arm/mach-omap2/board-ldp.c | 1
arch/arm/mach-omap2/board-omap3beagle.c | 1
arch/arm/mach-omap2/board-omap3evm.c | 1
arch/arm/mach-omap2/board-omap3logic.c | 1
arch/arm/mach-omap2/board-omap3pandora.c | 1
arch/arm/mach-omap2/board-omap3stalker.c | 1
arch/arm/mach-omap2/board-omap3touchbook.c | 1
arch/arm/mach-omap2/board-omap4panda.c | 1
arch/arm/mach-omap2/board-overo.c | 1
arch/arm/mach-omap2/board-rm680.c | 1
arch/arm/mach-omap2/board-rx51.c | 1
arch/arm/mach-omap2/board-ti8168evm.c | 1
arch/arm/mach-omap2/board-zoom-peripherals.c | 1
arch/arm/mach-omap2/board-zoom.c | 1
arch/arm/mach-omap2/common.h | 2
arch/arm/mach-omap2/omap_phy_internal.c | 4 -
arch/arm/mach-omap2/twl-common.c | 1
arch/arm/mach-omap2/usb-host.c | 2
arch/arm/mach-omap2/usb-musb.c | 2
arch/arm/mach-omap2/usb.h | 82 ++++++++++++++++++++
arch/arm/plat-omap/include/plat/usb.h | 106 --------------------------
32 files changed, 88 insertions(+), 136 deletions(-)
create mode 100644 arch/arm/mach-omap2/usb.h
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638f407..1e49eda 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -22,7 +22,6 @@
#include <asm/mach-types.h>
#include <plat/cpu.h>
-#include <plat/usb.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/clkdev_omap.h>
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 95b384d..df561ad 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -35,7 +35,6 @@
#include "common.h"
#include <plat/gpmc.h>
-#include <plat/usb.h>
#include "gpmc-smc91x.h"
#include <video/omapdss.h>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 96cd369..14c07ee 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -30,7 +30,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index fc224ad..f8e6288 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -18,7 +18,6 @@
#include "common.h"
#include "gpmc-smc91x.h"
-#include <plat/usb.h>
#include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 3669c12..5700fc5 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -34,7 +34,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <plat/mmc.h>
#include "omap4-keypad.h"
#include <video/omapdss.h>
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 318fead..603503c 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include "am35xx-emac.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index e162897..0dbeb77 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -33,7 +33,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 376d26e..435c7be 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -41,7 +41,6 @@
#include "common.h"
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/gpmc.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 59c0a45..db1e14c 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -39,7 +39,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 1fd161e..8df2720 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -41,7 +41,6 @@
#include "common.h"
#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41..62da89f 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -31,7 +31,6 @@
#include "common.h"
#include <plat/gpmc.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ee8c3cf..8d9406b 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -37,7 +37,6 @@
#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
-#include <plat/usb.h>
#include "gpmc-smsc911x.h"
#include <video/omapdss.h>
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431..33a5f58 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -43,7 +43,6 @@
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <plat/omap_device.h>
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b9b776b..6e7e69b 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -45,7 +45,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include <linux/platform_data/spi-omap2-mcspi.h>
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7bd8253..a0d8fe1 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -37,7 +37,6 @@
#include "gpmc-smsc911x.h"
#include <plat/gpmc.h>
#include <plat/sdrc.h>
-#include <plat/usb.h>
#include "common.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 00a1f4a..f2be51b 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -42,7 +42,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <linux/platform_data/mtd-nand-omap2.h>
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 731235e..4343fb6 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -42,7 +42,6 @@
#include "common.h"
#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 944ffc4..c26c958 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -46,7 +46,6 @@
#include "common.h"
#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include "mux.h"
#include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index bfcd397..74e39bb 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -39,7 +39,6 @@
#include <video/omapdss.h>
#include "common.h"
-#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b700685..0eed6da 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -50,7 +50,6 @@
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
-#include <plat/usb.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 45997bf..d55a983 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -24,7 +24,6 @@
#include <plat/i2c.h>
#include <plat/mmc.h>
-#include <plat/usb.h>
#include <plat/gpmc.h>
#include "common.h"
#include <plat/serial.h>
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 7bbb05d..8c4d27e 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -26,7 +26,6 @@
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
-#include <plat/usb.h>
#include "mux.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index c4f8833..4977c77 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -20,7 +20,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
static struct omap_musb_board_data musb_board_data = {
.set_phy_power = ti81xx_musb_phy_power,
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c166fe1..ce923b7 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4994438..6e1afae 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -22,7 +22,6 @@
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/usb.h>
#include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 7045e4d..fa2f4c9 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -36,6 +36,8 @@
#include <plat/serial.h>
#include <plat/common.h>
+#include "usb.h"
+
#define OMAP_INTC_START NR_IRQS
#ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index d992db8..4d76a3c 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -27,11 +27,11 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/usb.h>
-
-#include <plat/usb.h>
+#include <linux/usb/musb.h>
#include "soc.h"
#include "control.h"
+#include "usb.h"
void am35x_musb_reset(void)
{
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 635e109..1131d47 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -27,7 +27,6 @@
#include <linux/regulator/fixed.h>
#include <plat/i2c.h>
-#include <plat/usb.h>
#include "soc.h"
#include "twl-common.h"
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 3c43449..b1cf8c8 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -25,10 +25,10 @@
#include <asm/io.h>
-#include <plat/usb.h>
#include <plat/omap_device.h>
#include "mux.h"
+#include "usb.h"
#ifdef CONFIG_MFD_OMAP_USB_HOST
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 51da21c..faf473f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -25,12 +25,12 @@
#include <linux/io.h>
#include <linux/usb/musb.h>
-#include <plat/usb.h>
#include <plat/omap_device.h>
#include "am35xx.h"
#include "mux.h"
+#include "usb.h"
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
new file mode 100644
index 0000000..b2c4ff1
--- /dev/null
+++ b/arch/arm/mach-omap2/usb.h
@@ -0,0 +1,82 @@
+#include <plat/usb.h>
+
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE (1 << 23)
+#define CONF2_OTGMODE (3 << 14)
+#define CONF2_NO_OVERRIDE (0 << 14)
+#define CONF2_FORCE_HOST (1 << 14)
+#define CONF2_FORCE_DEVICE (2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN (1 << 13)
+#define CONF2_VBDTCTEN (1 << 12)
+#define CONF2_REFFREQ_24MHZ (2 << 8)
+#define CONF2_REFFREQ_26MHZ (7 << 8)
+#define CONF2_REFFREQ_13MHZ (6 << 8)
+#define CONF2_REFFREQ (0xf << 8)
+#define CONF2_PHYCLKGD (1 << 7)
+#define CONF2_VBUSSENSE (1 << 6)
+#define CONF2_PHY_PLLON (1 << 5)
+#define CONF2_RESET (1 << 4)
+#define CONF2_PHYPWRDN (1 << 3)
+#define CONF2_OTGPWRDN (1 << 2)
+#define CONF2_DATPOL (1 << 1)
+
+/* TI81XX specific definitions */
+#define USBCTRL0 0x620
+#define USBSTAT0 0x624
+
+/* TI816X PHY controls bits */
+#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
+#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
+
+/* TI814X PHY controls bits */
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_CHGDET_DIS (1 << 2)
+#define USBPHY_CHGDET_RSTRT (1 << 3)
+#define USBPHY_SRCONDM (1 << 4)
+#define USBPHY_SINKONDP (1 << 5)
+#define USBPHY_CHGISINK_EN (1 << 6)
+#define USBPHY_CHGVSRC_EN (1 << 7)
+#define USBPHY_DMPULLUP (1 << 8)
+#define USBPHY_DPPULLUP (1 << 9)
+#define USBPHY_CDET_EXTCTL (1 << 10)
+#define USBPHY_GPIO_MODE (1 << 12)
+#define USBPHY_DPOPBUFCTL (1 << 13)
+#define USBPHY_DMOPBUFCTL (1 << 14)
+#define USBPHY_DPINPUT (1 << 15)
+#define USBPHY_DMINPUT (1 << 16)
+#define USBPHY_DPGPIO_PD (1 << 17)
+#define USBPHY_DMGPIO_PD (1 << 18)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+#define USBPHY_DATA_POLARITY (1 << 23)
+
+struct usbhs_omap_board_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ /* have to be valid if phy_reset is true and portx is in phy mode */
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+ /* Set this to true for ES2.x silicon */
+ unsigned es2_compatibility:1;
+
+ unsigned phy_reset:1;
+
+ /*
+ * Regulators for USB PHYs.
+ * Each PHY can have a separate regulator.
+ */
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
+
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 87ee140..1dd6522 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -26,24 +26,6 @@ enum usbhs_omap_port_mode {
OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
};
-struct usbhs_omap_board_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- /* have to be valid if phy_reset is true and portx is in phy mode */
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
-
- /* Set this to true for ES2.x silicon */
- unsigned es2_compatibility:1;
-
- unsigned phy_reset:1;
-
- /*
- * Regulators for USB PHYs.
- * Each PHY can have a separate regulator.
- */
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
-};
-
#ifdef CONFIG_ARCH_OMAP2PLUS
struct ehci_hcd_omap_platform_data {
@@ -83,97 +65,9 @@ struct omap_musb_board_data {
enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
extern int omap_tll_enable(void);
extern int omap_tll_disable(void);
-extern int omap4430_phy_power(struct device *dev, int ID, int on);
-extern int omap4430_phy_set_clk(struct device *dev, int on);
-extern int omap4430_phy_init(struct device *dev);
-extern int omap4430_phy_exit(struct device *dev);
-extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
-#endif
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
-
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE (1 << 23)
-#define CONF2_OTGMODE (3 << 14)
-#define CONF2_NO_OVERRIDE (0 << 14)
-#define CONF2_FORCE_HOST (1 << 14)
-#define CONF2_FORCE_DEVICE (2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN (1 << 13)
-#define CONF2_VBDTCTEN (1 << 12)
-#define CONF2_REFFREQ_24MHZ (2 << 8)
-#define CONF2_REFFREQ_26MHZ (7 << 8)
-#define CONF2_REFFREQ_13MHZ (6 << 8)
-#define CONF2_REFFREQ (0xf << 8)
-#define CONF2_PHYCLKGD (1 << 7)
-#define CONF2_VBUSSENSE (1 << 6)
-#define CONF2_PHY_PLLON (1 << 5)
-#define CONF2_RESET (1 << 4)
-#define CONF2_PHYPWRDN (1 << 3)
-#define CONF2_OTGPWRDN (1 << 2)
-#define CONF2_DATPOL (1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0 0x620
-#define USBSTAT0 0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN (1 << 0)
-#define USBPHY_OTG_PWRDN (1 << 1)
-#define USBPHY_CHGDET_DIS (1 << 2)
-#define USBPHY_CHGDET_RSTRT (1 << 3)
-#define USBPHY_SRCONDM (1 << 4)
-#define USBPHY_SINKONDP (1 << 5)
-#define USBPHY_CHGISINK_EN (1 << 6)
-#define USBPHY_CHGVSRC_EN (1 << 7)
-#define USBPHY_DMPULLUP (1 << 8)
-#define USBPHY_DPPULLUP (1 << 9)
-#define USBPHY_CDET_EXTCTL (1 << 10)
-#define USBPHY_GPIO_MODE (1 << 12)
-#define USBPHY_DPOPBUFCTL (1 << 13)
-#define USBPHY_DMOPBUFCTL (1 << 14)
-#define USBPHY_DPINPUT (1 << 15)
-#define USBPHY_DMINPUT (1 << 16)
-#define USBPHY_DPGPIO_PD (1 << 17)
-#define USBPHY_DMGPIO_PD (1 << 18)
-#define USBPHY_OTGVDET_EN (1 << 19)
-#define USBPHY_OTGSESSEND_EN (1 << 20)
-#define USBPHY_DATA_POLARITY (1 << 23)
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
-u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
-u32 omap1_usb1_init(unsigned nwires);
-u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
-#else
-static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
- return 0;
-}
-static inline u32 omap1_usb1_init(unsigned nwires)
-{
- return 0;
-
-}
-static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
- return 0;
-}
#endif
#endif /* __ASM_ARCH_OMAP_USB_H */
More information about the linux-arm-kernel
mailing list